366 TRS Det 6 Airfield Recovery Tabletop

Forms / Attachments / Pricing Sheets

This document, "Attachment 3 - Clauses and Provisions," lists and provides the text for various clauses and provisions that are incorporated by reference into the solicitation. It serves as a reference for bidders to understand the contractual terms and conditions that will apply to any resulting contract.

• Clauses Incorporated by Reference: A table listing clause numbers, alternate/development numbers, clause titles, year/month of the clause, and the section where they are located (e.g., SEC I, SEC K, SEC G, SEC M).
• Clauses in Full Text: Provides the complete text for specific clauses, such as 252.204-7017, "Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services-Representation."
• Various DFARS and FAR Clauses: The document includes numerous clauses related to:
  • Compensation and Whistleblower Rights
  • Prohibition on certain equipment and services (e.g., telecommunications, Kaspersky Lab, ByteDance)
  • Buy American Act and Balance of Payments Program
  • Payment instructions (e.g., Wide Area WorkFlow)
  • Evaluation of offers for commercial products and services
  • Contract terms and conditions implementing statutes and executive orders
  • Small business set-asides and subcontracting plans
  • Labor standards and equal opportunity requirements
  • Privacy and security safeguards
  • Restrictions on foreign purchases and trade agreements
  • Reporting requirements

This document is critical for bidders as it outlines the mandatory contractual requirements, prohibitions, and representations that must be understood and complied with. Bidders must review these clauses to ensure their offers meet all legal and regulatory obligations and to accurately complete any required representations or certifications. Failure to comply with these clauses could impact the eligibility or evaluation of an offer.

Questions & Answers / Clarifications

This document provides responses to vendor questions regarding Solicitation FA302026Q0007, clarifying requirements for the creation of training models.

• Runway Length: The runway must extend the full length of the table to allow for marking practice.
• CAD Files: No CAD files are provided; all relevant attachments are included in the solicitation.
• Terrain: The terrain should have actual texture, not just a printed wrap.
• Detailing: Airbrushing should be realistic and professional, but not require extreme detail, and must be durable.
• Quantity: Quantities for items like Hesco blocks refer to the total for the full set (e.g., 50 EA HECO barriers total).
• Delivery: Offerors should propose lead times as part of their quotation; no specified delivery date is provided.
• Design Review: Offerors should provide CAD mockups for customer review before production.
• Standards: No specific government standards for finishes are provided; finishes should be realistic military-standard and durable.
• Material: No specific fabrication material is required; contractors may use materials that best support durability. Small features may use alternative materials to prevent breakage.
• ITAR: The requirement is not subject to ITAR restrictions; items are training aids and commercial fabrication.
• Scale: A uniform scale between 1:72 and 1:144 is acceptable. 1:72 is preferred for larger vehicles, but 1:144 may be proposed if necessary for tabletop fit. The primary requirement is that models are large enough for students to handle and identify.

These clarifications may affect how offerors prepare their proposals, particularly regarding material choices, detailing, scale, and lead time estimations. Bidders should review these answers carefully to ensure their proposals accurately reflect the clarified requirements.

Form / Attachment / Pricing Sheet

This document is a table detailing various items and their dimensions in "Real-World Size," "1:72 Scale Model," and "1:144 Scale Model." It appears to be a reference table for scale models or potentially for planning purposes related to the size of equipment.

• Item: Lists specific equipment and structures (e.g., aircraft, vehicles, shelters, tents).
• Real-World Size: Provides dimensions in a standard unit (likely feet or inches, based on context).
• 1:72 Scale Model: Lists dimensions for a 1:72 scale representation.
• 1:144 Scale Model: Lists dimensions for a 1:144 scale representation.

Bidders may need to use this table to understand the physical scale of items related to the opportunity, particularly if the opportunity involves the procurement, deployment, or simulation of equipment where scale is a factor. It could be relevant for proposal preparation if specific scale models or representations are required, or if the opportunity relates to logistics or planning where accurate dimensions are critical.

Solicitation / RFP / RFQ

This is a combined synopsis/solicitation for commercial items, issued as a Request for Quotation (RFQ), for the creation and delivery of 4 EA magnetic activity tables with accompanying magnetic training pieces. The tables will depict unique airfields and a tent city, designed to be realistic and durable for daily use.

• 4 EA magnetic activity tables (72 in x 30 in) with realistic terrain and magnetic training pieces.

• 3 tables will represent unique airfields; 1 table will represent a tent city.

• Tables must be assembled in sections for easy transport.

• CAD designed and 3D printed models (IAW Attachment 1 - 3D Printed Models).

• Models must be high-resolution resin printed and airbrush painted.

• CAD design mockups are required with quotations.

• Custom CAD modeling for unique models and high detail resin printing (IAW Attachment 1).

• Professional airbrushing with clear coating.

• Pelican cases for 3D printed models (4 EA).

• Case for activity tabletops (4 EA).

• Shipping.

• The period of performance is not explicitly stated but is implied by the response deadline and quote validity.

• Response Deadline: Tuesday, 24 March 2026, no later than 1300 CST.

• Questions Deadline: 19 March 2026, 1000 CST.

• Quotes must be submitted via email to the Points of Contact (POCs) and Contracting Officer.

• Quotes must be valid for 90 days.

• Evaluation Criteria: The Government intends to award to the responsible vendor whose quote represents the best value, considering price and other factors. Technical capability to meet the Government's requirement is a key evaluation factor.

• This acquisition is set aside 100% for Small Business Concerns.

• NAICS Code: 339999

• Small Business Size Standard: 550 Employees

• This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued.

• Incorporated provisions and clauses are those in effect through Federal Acquisition Circular (10/01/2025), Defense Federal Acquisition Regulation Public Notice (11/10/2025), and Department of the Air Force Federal Acquisition Circular (10/16/2024).

• Attachments referenced: Attachment 1 - 3D Printed Models, Attachment 2 - Airfield Tabletop Layouts, Attachment 3 - Clauses and Provisions.

Questions & Answers / Clarifications

This document provides responses to vendor questions regarding solicitation FA302026Q0007, clarifying requirements for the production of models and related items.

• Runway Scale: The runway should extend the full length of the table to allow for practice with markings.
• CAD Files: The government does not possess CAD files; all necessary attachments are included in the solicitation.
• Overall Scale: A uniform scale of 1/64 should be used for all objects and vehicles.
• Terrain Texture: Terrain should feature actual texture rather than a printed wrap image.
• Coloring Detail: Coloring should be realistic and professional, suitable for use, but extreme detail is not required.
• Quantity: Quantities for items like Hesco barriers refer to the total for the full set of models (e.g., 50 total HECO barriers).
• Lead Times: Offerors are required to propose lead times as part of their quotation.
• Design Review: Offerors should provide CAD mockups as part of their quotation for customer review, rather than proceeding directly to fabrication without review.
• Finishes: While no specific government standards are provided, finishes should be realistic, military-standard consistent with recognizable platforms, and durable for everyday use.
• Not-to-Exceed (NTE) Amount: There is no government-established NTE amount for this requirement.

This Q&A document clarifies several aspects of the original solicitation, including scale, texture, quantity definitions, and submission requirements for mockups and lead times. It does not appear to alter major deadlines or evaluation factors but provides essential details for accurate proposal preparation.

Questions & Answers / Clarifications

This document provides responses to vendor questions regarding solicitation FA302026Q0007.

• Runway Scale: The runway should extend the full length of the table to allow for marking practice, even if it means increasing the scale of the models.
• CAD Files: No CAD files are available; all necessary attachments are included in the solicitation.
• Scale: A single scale of 1/64 should be used for all objects, including vehicles.
• Terrain: The terrain should have actual texture, not just a printed wrap image.
• Object Coloring: Airbrushing should be realistic and professional, but not require extreme detail, and must be able to withstand use.
• Quantity: Quantities specified are for the full set of 4 models. For example, 50 Hesco blocks would mean a total of 50 HECO barriers for the entire set.

These clarifications provide specific details on scale, texture, quantity, and file availability, which may affect how bidders prepare their proposals and models.

Form / Attachment / Pricing Sheet

This document, "Attachment 1- 3D Printed Models," lists various 3D printed items that may be required for an opportunity. It specifies quantities and provides visual examples of each item.

• Air Traffic Control Towers: 3 EA
• HESCO Barriers: 50 EA (magnets on 6 sides)
• Vehicle Chocks: 10 EA (Yellow)
• Traffic Cones: 50 EA (1")
• Shelter Tents: 1 EA Medium Shelter Tent (MSS), 12 EA Small Shelter Tent (SSS) (including 1 labeled "Gym" and 1 labeled "DFAC")
• Aircraft: 3 EA C-17, 5 EA C-130, 2 EA F-15, 4 EA A-10, 1 EA KC-135
• Helicopters: 1 EA Chinook, 1 EA Blackhawk
• Large Aircraft: 1 EA C-5
• Expandable ISU: 3 EA
• ISO 20 Seavan Containers: 6 EA
• ISU 90: 9 EA
• Tents: 1 EA Clam Shell Tent, 1 EA Temper Tent (labeled "Medical")
• Heavy Equipment: 2 EA Front End Loader, 3 EA Dump Trucks, 1 EA LMTV, 3 EA Light Carts, 3 EA 10k AT Forklift, 3 EA Backhoe
• Fuel/Water Storage: 6 EA Fuel Bladders, 2 EA Water Bladders (1 labeled "Non-Potable", 1 labeled "Potable")
• Vehicles: 4 EA Up-armored Humvee
• Ancillary Equipment: 3 EA Wind Sock, 3 EA 25K Aircraft Loaders, 2 EA Fuel Trucks
• Sanitation Containers: 1 EA Shower Container (labeled "Shower"), 1 EA Bathroom Container (labeled "Bathroom")

This attachment provides a detailed list of specific 3D printed models required. Bidders should review this list to determine their capability to produce or source these items, as they likely represent key deliverables or components for the overall opportunity.

Form / Attachment / Pricing Sheet

This document provides airfield and tent city layout examples for tabletop exercises. It serves as a visual reference for creating magnetic tabletop models where 3D printed pieces can be attached.

• Airfield Layouts (Tabletops #1, #2, #3):

  • Require magnetic surfaces for attaching 3D printed pieces.
  • Feature realistic terrain.
  • Designed in sections for disassembly and easy transport.
  • Dimensions: 72" x 30".
  • Includes aerial imagery of various airfields (e.g., Nellis AFB, Fort Sill Army Airfield).

• Tent City Layout Examples (Tabletop #4):

  • Tents are intended to be 3D printed for student placement and setup.
  • Features realistic terrain.
  • Designed in sections for disassembly and easy transport.
  • Tabletop surface must be magnetic for 3D printed pieces.
  • Dimensions: 72" x 30".
  • Includes diagrams of tent configurations and associated equipment (e.g., generators).

This attachment provides specific design requirements and examples for physical models or simulations that may be part of the opportunity's deliverables or demonstration requirements. Bidders should note the material, construction, and dimensional specifications for any proposed tabletop models.

Solicitation / RFQ

This is a combined synopsis/solicitation for commercial items, issued as a Request for Quotation (RFQ), for the creation and delivery of magnetic activity tables and accompanying magnetic training pieces for Sheppard AFB, TX. The government is procuring 4 sets of magnetic activity tables, with 3 sets depicting unique airfields and 1 set depicting a tent city, as detailed in Attachment 2.

• 4 EA magnetic activity tables (72 in x 30 in) with accompanying magnetic training pieces.

• 3 tables to represent unique airfields; 1 table to represent a tent city (IAW Attachment 2 - Airfield Tabletop Layouts).

• Tables must have a realistic feel (terrain) and be assembled in sections for easy transport.

• CAD designed and 3D printed models (IAW Attachment 1 - 3D Printed Models).

• 3D printed models must be high-resolution resin printed and airbrush painted.

• Models must be durable and high quality for daily use.

• Professional airbrushing with clear coating.

• Perican Cases for 3D Printed Models for each airfield.

• Case for Activity Tabletops.

• Shipping.

• This acquisition is set aside 100% for Small Business Concerns.

• NAICS Code: 339999

• Small Business Size Standard: 550 Employees

• Quotes must be valid for 90 days.

• Questions due: 26 February 2026.

• Quotes due: 04 March 2026, no later than 1300 CST.

• Submission method: Email to the Points of Contact (POCs) and Contracting Officer listed.

• Evaluation Factors: Technical Capability to Meet Government's Requirement, Price, and Delivery Terms.

• 100% Small Business Set-Aside.

• This solicitation constitutes the only solicitation; a written solicitation will not be issued.

• Incorporated provisions and clauses are current through various Federal Acquisition Circulars and Defense Federal Acquisition Regulation Public Notices.

• Attachments include: 3D Printed Models, Airfield Tabletop Layouts, and Clauses and Provisions.

Form / Attachment / Pricing Sheet

This document, "Attachment 3 - Clauses and Provisions," lists and provides the text for various clauses and provisions that are incorporated by reference into the solicitation. It serves as a reference for bidders to understand the contractual terms and conditions that will apply to any resulting contract.

• Clauses Incorporated by Reference: A table listing numerous FAR (Federal Acquisition Regulation) and DFARS (Defense Federal Acquisition Regulation Supplement) clauses, including their clause numbers, alteration/development numbers, titles, year/month of incorporation, and section.
• Clauses in Full Text: Provides the complete text for specific clauses, such as FAR 252.204-7017, "Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services-Representation."
• Applicability: The document details various clauses related to:
  • Prohibitions on certain equipment and services (e.g., defense telecommunications, Kaspersky Lab).
  • Buy American Act and Free Trade Agreements.
  • Payment instructions (e.g., Wide Area WorkFlow - WAWF).
  • Evaluation factors for commercial products and services.
  • Contract terms required to implement statutes or executive orders.
  • Small business set-asides and subcontracting requirements.
  • Labor standards and wage requirements.
  • Reporting requirements.
  • Supply chain security.
  • Environmental considerations.
  • Privacy and security safeguards.

Bidders must carefully review all clauses and provisions to understand their contractual obligations, potential impacts on their proposed solutions, and any specific requirements for representation or compliance. This document is critical for accurately preparing proposals and ensuring compliance with all applicable federal regulations and policies.