Colorado Springs Airtanker Electrical Project

Amendment / Modification

This amendment (A0001) to Solicitation 1240LT26Q0043 serves the following purposes:

• Provides answers to contractor questions.

• Includes the attendee list for the site visit held on March 26, 2026.

• Confirms that all other terms and conditions remain unchanged.

• Questions and Answers section.

• Site Visit Attendee List.

• The due date for quotes remains April 22, 2026, at 1:00 p.m. Central Time.

• Responses must be emailed to Lucas Dahlman (lucas.dahlman@usda.gov) and Janice King (janice.king@usda.gov).

• The email subject line must include: "Colorado Springs Airtanker Base Electrical Project Quote – 1240LT26Q0043".

• Trenches may fill with water, potentially containing salt from retardant.

• Outlets can be located on the yellow steel plate of the containment trench; drilling through this plate is permitted.

• Transformer/sub panel can be located anywhere in line with current panels along the containment wall.

• Project completion is required by August 30, 2026.

• Freedom Mechanical

• Green Electric

• Atmosphere LLC

• Foster Electric

• Period of Performance: 05/01/2026 to 10/30/2026.

Statement of Work (SOW) / Performance Work Statement (PWS)

To install electrical power to the loading pits at the Colorado Springs Airtanker Base to support the operation of micromotion meters required for loading retardant onto agency-contracted air tankers.

• Base Item (CLIN 0001 - Pit 1):

  • Install one (1) 100amp 3ph power panel (NEMA 3R or equivalent).
  • Install one (1) 30KVA NEMA 3R Transformer or equivalent.
  • Install necessary feeders and junction boxes.
  • All connections must be weatherproof.
  • Mount conduit a minimum of 12 inches off the bottom of the existing trench.
  • Cut or drill holes for conduit in metal trench grates.
  • Conduit must be sized to accommodate power to Pit 2 if the optional item is awarded.
  • Install one (1) single detachable weatherproof rubber or flexible conduit with two (2) 110V, 15-amp plugs at Pit 1.
  • Power runs from subpanel (Point A) to Pit 1, with a removable conduit section (approx. 30 feet) from containment to grate (Point B).
  • Distance from subpanel to Pit 1 is approximately 375 feet.

• Optional Item (CLIN 1001 - Pit 2):

  • Awarded only if funding allows, at the time of the base award.
  • No separate mobilization costs; covered by Base CLIN.
  • Install required junction boxes.
  • All connections must be weatherproof.
  • Mount conduit a minimum of 12 inches off the bottom of the existing trench.
  • Cut or drill holes for conduit in metal trench grates.
  • Install one (1) single detachable weatherproof rubber or flexible conduit with two (2) 110V, 15-amp plugs at Pit 2.
  • Power runs from subpanel (Point A) to Pit 2, with a removable conduit section (approx. 30 feet) from containment to grate (Point B).
  • Distance from subpanel to Pit 2 is approximately 250 feet.

• Worksite is the secure area of the Colorado Springs Airport, 3475 Bud Breckner Blvd, Colorado Springs, CO 80916.

• Work can be completed 7 days a week, Sunday through Saturday, 0800-1800.

• All contractors must obtain required permits through the Pikes Peak Building Department.

• All electrical work must be weatherproof.

• Installation must meet all applicable Federal, State, and Local codes.

• Contractor personnel will require access granted by USFS personnel.

• Contractor must adhere to all airport rules and regulations.

• Daily progress reports are required via phone and/or email.

• Travel to the site is required daily; reimbursement is the contractor's responsibility.

Form / Attachment / Pricing Sheet

This document is a Schedule of Items (SOI) for the Colorado Springs Airtanker Base Electrical Project. It outlines the specific electrical installation tasks required for the project and provides fields for vendors to enter pricing information.

• Project Title: Colorado Springs Airtanker Base Electrical Project, Colorado Springs, Colorado.
• Base CLIN 0001: Installation of a weatherproof electrical outlet at pit 1. This is a required item.
• Option CLIN 1001: Installation of a weatherproof electrical outlet at pit 2. This is an optional item and not required to be exercised by the government.
• Pricing Instructions: All individual line-item pricing must be rounded up to the nearest whole dollar, excluding cents. The total pricing should equal the sum of individual line-item amounts.
• Optional Items: If optional work is exercised, the contractor must perform it according to the contract terms.

This document is crucial for bidders as it details the specific work items (both base and optional) for which pricing is required. Bidders must use this schedule to calculate and submit their proposed costs for the electrical installation tasks. The rounding instructions for pricing are a key detail to follow for accurate submission.

Solicitation / RFP / RFQ

This is a combined synopsis/solicitation for commercial items (RFQ) to procure design, labor, materials, equipment, and miscellaneous items for the installation of electrical power to loading pits at the Colorado Springs Airtanker Base. The electrical power is needed for micro motions meters required for loading retardant onto air tankers, and all electrical work must be weatherproof for outdoor exposure.

• Installation of electrical power to loading pits.

• Supply all labor, materials, equipment, and miscellaneous items.

• All electrical work must be weatherproof.

• Refer to the Statement of Work (Attachment 1) for full electrical project requirements.

• Contract Type: Firm Fixed Price.

• Magnitude of Construction: Between $25,000 to $100,000.00.

• Period of Performance: Estimated Award Date with completion no later than October 30, 2026. (Specific start date not detailed, but delivery is 10/30/2026).

• Bonds: Bid Bond/Offer Guarantee required (20% of quote, not to exceed $3 million). Performance & Payment Bonds required if award exceeds $35,000 (100% Payment Bond) or $150,000 (100% Payment and Performance Bonds).

• Questions Due: April 2nd, 2026, by 1:00 PM Central Daylight Time (CDT).

• Quotes Due: April 22nd, 2026, by 1:00 PM Central Daylight Time (CDT).

• Submission Method: Email to Janice.King@usda.gov and Lucas.Dahlman@usda.gov.

• Quote Format: Max 5 pages (excluding Schedule of Items), Times New Roman Font 12, 8x11 paper. Include Technical Approach, Pricing Documentation (Schedule of Items), Bid Guarantee, and Acknowledgement of Amendments.

• Evaluation: Comparative evaluation methodology to determine best value. Factors include Technical Approach (including a 1-3 page narrative and Construction Schedule) and Price. A confidence rating will be assigned based on technical approach and schedule.

• This acquisition is a Total Small Business Set-Aside.

• NAICS Code: 238210 - Electrical Contractors and Other Wiring Installation Contractors.

• Small Business Size Standard: $19 million.

• Offerors must have an active System for Award Management (SAM) registration.

• A site visit is scheduled for March 26th, 2026, at 1:00 PM MST. Contact Joshua Walk or Scott Headrick to coordinate.

• All amendments will be distributed via email; offerors must acknowledge receipt.

• Pricing must be rounded to the nearest whole dollar (no cents).

Form / Attachment / Pricing Sheet

This document is a General Decision Number (GDN) for the state of Colorado, specifically for El Paso County. It outlines the prevailing wage rates and fringe benefits for various construction trades applicable to building construction projects (excluding single-family homes and apartments up to four stories). This information is crucial for contractors to understand labor costs and ensure compliance with federal regulations when bidding on relevant projects.

• General Decision Number: C020260022 (effective 01/02/2026)
• State: Colorado
• County: El Paso County
• Construction Type: Building (excluding single-family homes and apartments up to 4 stories)
• Trades Covered: Includes, but is not limited to, Asbestos Worker, Electrician, Elevator Mechanic, Power Equipment Operator, Ironworker, Pipefitter, Sheet Metal Worker, Bricklayer, Carpenter, Laborer, Operator, Painter, Roofer, and Truck Driver.
• Rates and Fringes: Specific hourly rates and fringe benefit amounts are listed for each trade.
• Footnotes: Include details on vacation policies and paid holidays.
• Executive Orders: References Executive Order (EO) 13706 (Paid Sick Leave for Federal Contractors) and EO 13658 (Establishing a Minimum Wage for Federal Contractors).

Bidders must use these prevailing wage rates to accurately estimate labor costs for their proposals. Failure to comply with these wage and fringe benefit requirements can lead to bid disqualification or contract non-compliance. The document also highlights specific federal executive orders that contractors must adhere to, impacting labor practices and costs.