W912EE26BA002 - Lease of One Cutterhead, Hydraulic Pipeline Dredge (Not Less Than 24-Inch Diameter) Fully Operated with Attendant Plant and Personnel, and with a Draft not to Exceed 9 Feet, for Construction and Maintenance Dredging - JBJ Waterway
Overview
Buyer
Place of Performance
NAICS
PSC
Set Aside
Original Source
Timeline
Qualification Details
Fit reasons
- NAICS alignment with historical contract wins in similar service areas.
- Scope strongly matches core technical capabilities and delivery model.
Risks
- Past performance thresholds may require one additional teaming partner.
- Potential clarification needed on staffing minimums before bid/no-bid.
Next steps
Validate eligibility requirements, assign capture owner, and schedule partner outreach to confirm teaming strategy before submission planning.
Quick Summary
The U.S. Army Corps of Engineers (USACE), Vicksburg District, has issued an Invitation for Bids (IFB), Solicitation Number W912EE26BA002, for the Lease of One Cutterhead, Hydraulic Pipeline Dredge (not less than 24-inch diameter), fully operated with attendant plant and personnel, with a draft not to exceed 9 feet. This Unrestricted procurement is for construction and maintenance dredging within the Vicksburg District – JBJ Waterway. The estimated value is between $5 Million and $10 Million. Bids are due April 2, 2026, at 2:00 PM CDT.
Scope of Work
The contractor will furnish, deliver, and operate a cutterhead, hydraulic pipeline dredge meeting specific technical requirements:
- Dredge Type: Not less than 24-inch diameter, fully operated with attendant plant and personnel.
- Draft: Not to exceed 9 feet.
- Dredging Capability: Must be capable of digging to a depth of 40 feet below the water surface without exceeding a ladder angle of 45 degrees from horizontal.
- Cut Width: Must be able to make a 200-foot bottom width cut in a single pass at a 40-foot water depth without exceeding a swing angle of 45 degrees to either side of the cut centerline.
- Spud Requirements: Capable of holding the dredge in place under dredging conditions in currents up to 7 feet per second, with at least 10 feet of vertical movement without re-pinning.
- Operational Depth: Capable of starting and working efficiently in 10 feet of depth.
- Channel Navigation: Designed to work efficiently and permit passage of other vessels while working in a 150-foot wide channel.
- Safety Feature: A check (flap) valve shall be located on the dredge in the discharge line near the pump.
- Period of Performance: 365 Calendar Days from the date of the Notice to Proceed.
Contract Details
- Contract Type: Firm Fixed-Price Construction Contract.
- Set-Aside: Unrestricted.
- NAICS Code: 237990 (Other Heavy and Civil Engineering Construction, Dredging and Surface Cleanup Activities) with a size standard of $37 Million.
- PSC Code: Z1KF (Maintenance Of Dredging Facilities).
- Estimated Magnitude: Between $5 Million and $10 Million.
Submission & Evaluation
- Bid Opening Date: April 2, 2026, at 2:00 PM CDT.
- Evaluation Criteria: Award will be based on the lowest price submitted from a responsive, responsible bidder.
- Required Documents: Bidders must accurately complete and return SF-1442, Bidding Schedule, Bidder Representations and Certifications, and Plant Characteristics Sheet with their bid. A Bid Guarantee is required.
- Registration: Bidders must have and maintain an active registration in SAM.gov, including the NAICS code they are bidding under. Joint Ventures must also have valid SAM registration.
Additional Notes
- Official plans and specifications are available on SAM.gov. Bidders are encouraged to register on the Interested Vendor's List (IVL) and check for amendments.
- Technical inquiries and questions should be submitted via Bidder Inquiry in ProjNet at www.projnet.org.
- The EM 385-1-1 "Corps of Engineers Safety and Health Requirements Manual" applies to all work.
- This procurement consolidates dredging requirements, justified by potential cost savings and improved efficiency.