FCI Oxford Repair Wastewater Aerator

Solicitation / RFP / RFQ

This document provides instructions for offerors responding to an acquisition. The acquisition will be evaluated using the FAR 15.101-2 Lowest price technically acceptable source selection process.

Offerors must submit two items:

1. Completed SF1449 (solicitation) including specific blocks (17a, 30a, 30b, 30c) and Page 4 with the amount filled in.
2. A summary of the technical process proposed to complete the work, in accordance with the Statement of Work.

Offers must clearly separate these two items; missing items will result in an unresponsive offer.

• Submission Deadline: April 3, 2026, at 04:00 pm.

• Submission Contact: rcalandra@bop.gov

• The acquisition will be evaluated using the Lowest price technically acceptable source selection process.

• A pre-bid Site Visit is scheduled for March 19, 2026, at 09:00 am at the Front Lobby of FCI Oxford.

Not specified in this document.

• For questions, contact Ronald Calandra at 843-387-9424 or rcalandra@bop.gov.
• For further information on the site visit, email oxf-facilities-s@bop.gov.
• No NCIC clearances are needed for the site visit; multiple representatives may attend.

Statement of Work (SOW) / Performance Work Statement (PWS)

To restore the existing wastewater aerator drive assembly serving the Federal Correctional Institution (FCI) Oxford's wastewater treatment system.

• Furnish all parts, labor, supervision, tools, equipment, transportation, and incidentals necessary to restore the existing aerator motor, gear drive, and bearing assemblies.

• Repair and installation services for the existing aeration equipment (Manufacturer: Magna Rotor, Model: 14" JG Magna Rotor 13, Serial Number: 03115 or approved equal).

• Motor Replacement: Replace existing 25 HP aerator motor, verifying suitability for continuous-duty wastewater aeration service and matching existing motor requirements.

• Bearing Repair and Service: Replace damaged or worn bearings, repack and lubricate per manufacturer specifications, and verify proper seating and load handling.

• Gear Drive Repair: Inspect gear oil, replace worn components, seals, and gaskets, refill with recommended lubricant, and verify gear mesh alignment and torque transmission.

• Removal and Reinstallation: Disconnect and remove components, perform precision alignment of motor-to-gear coupling, and secure all components with manufacturer torque requirements. All lockout/tagout procedures must be followed.

• Work scheduled to minimize disruption to the wastewater treatment process.

• Startup testing of the aerator assembly, verification of motor rotation, vibration levels, bearing temperature, and aerator basin mix/aeration performance. All deficiencies must be corrected prior to final acceptance.

• Installers/technicians must be qualified and certified by the manufacturer. Certification must be submitted in writing to the COR seven (7) days before the project starts.

• Adherence to seismic zone requirements, environmental compliance, Life Safety, NFPA, ADA-ABA, and Federal, State, and Local codes and regulations.

• Services and materials must adhere to current industry standards, Underwriters Laboratories (UL), and the National Electric Code (NEC).

• Work hours are Monday - Friday, 7:30 AM - 3:00 PM, excluding weekends and federal holidays. Any deviation requires prior written approval and scheduling at least five (5) working days in advance.

• Location: FCI Oxford, Wisconsin.

• Submittals: Information for background investigation, product data, installation instructions, project reference list, and closeout documentation (O&M manuals, warranty, redline drawings, testing reports, etc.).

• Warranty: Standard manufacturer warranty upon completion, plus a 1-year warranty on workmanship.

• Utilities: FBOP provides water, restrooms, and minimal electricity (120V). Contractor provides all other equipment, supplies, and materials, including portable electrical generated power.

• Housekeeping: Contractor responsible for keeping premises clean, removing debris, scrap, and rubbish daily. Surplus materials and equipment removed upon completion.

• Security: Strict adherence to security regulations, including security clearance for all personnel (within 14 days of notice to proceed), wearing of ID badges, daily check-in lists, and adherence to work hours and emergency procedures. Prohibited items include weapons, drugs, tobacco, alcohol, and unauthorized electronic devices.

• Personal Protective Equipment (PPE): Required for all contract employees.

• Materials Storage: Designated secure area, lockable gang box or similar, secured with chain and lock. No storage at heights creating fall hazards. Tools inventoried daily.

• Delivery of Material: Processed and coordinated with COR for temporary storage. Deliveries received between 7:30 AM - 1:00 PM, Monday - Friday. Contractor responsible for loading/unloading.

• Dress Code: Jeans permitted; shorts, green or khaki-color clothing not allowed. Clothing must be proper and suitable.

• Smoking: Only in outdoor designated areas.

Solicitation / RFP / RFQ

This document provides instructions for offerors responding to an acquisition. The acquisition will be evaluated using FAR 15.101-2 Lowest price technically acceptable source selection process.

Offerors must complete two steps:

1. Return SF1449 (solicitation) with specific blocks filled out (Page 1, block 17a with Name, Email, UEI, and Phone Number; blocks 30a, 30b, and 30c; and Page 4 with amount).
2. Submit a summary of the technical process to complete the work, in accordance with the Statement of Work.

Offers must clearly separate the two items. Missing items will result in an unresponsive offer.

Not specified in this document.

• Submission Deadline: 3 April 2026 at 04:00 pm.
• Submission Method: Email to rcalandra@bop.gov.
• Evaluation: Lowest price technically acceptable.

Not specified in this document.

• Pre-bid Site Visit: 19 March 2026 at 09:00 am, meeting at the Front Lobby of FCI Oxford, Federal Bureau of Prisons, County Road G & Elk Avenue, Oxford, WI 53952.
• Questions: Contact Ronald Calandra at 843-3287-9424 or rcalandra@bop.gov.
• Site Visit Information: For further information on the site visit, email oxf-facilities-s@bop.gov. No NCIC clearances are needed for the site visit, and multiple representatives may attend.

Solicitation / RFP / RFQ

This document is a solicitation for the repair of a wastewater aerator (#4) at the Federal Bureau of Prisons, FCI Oxford, located in Grand Marsh, WI. The work involves furnishing all parts, labor, supervision, tools, equipment, transportation, and incidentals necessary to restore the existing aerator motor, gear drive, and bearing assemblies to proper operating condition.

• Restore the existing aerator motor, gear drive, and bearing assemblies to proper operating condition.

• The work is described under PSC Z166.

• Contract Type: Firm Fixed Price.

• Magnitude of the project is estimated to be between $40,000.00 and $50,000.00.

• Period of Performance: Not explicitly stated, but a site visit is scheduled for March 19, 2026.

• Offer Due Date: April 3, 2026, 16:00 ET.

• Proposals are to be submitted to the Federal Bureau of Prisons, Field Acquisition Office.

• A Pre-Construction Conference is required prior to the start of construction.

• Submittals, including shop drawings, product data, and certificates, are required within 10 calendar days after commencement of work.

• Final inspection requires a minimum of ten (10) working days advanced written notice.

• The acquisition is set aside 100.00% for Women-Owned Small Business (WOSB).

• A site visit is scheduled for March 19, 2026, at 09:00 am, meeting at the Front Lobby.

• The solicitation incorporates numerous FAR clauses by reference, including those related to labor standards, safety, payment, and contract administration.

• Attachment 1 is the Statement of Work (SOW) and Attachment 2 is the Wage Determination.

Form / Attachment / Pricing Sheet

This document is a General Decision Number (GDN) for wage determination in Wisconsin, specifically for Heavy Construction Projects (excluding Tunnel, Sewer, and Water Lines). It outlines prevailing wage rates and fringe benefits for various construction trades across different counties in Wisconsin.

• General Decision Number: WI20260015
• State: Wisconsin
• Construction Type: Heavy
• Counties: Wisconsin Statewide
• Trades Covered: Boilermaker, Bricklayer, Cement Mason/Concrete Finisher, Carpenter, Piledriverman, Millwright, Electrician, Sound & Communications Installer/Technician, Truck Driver, Well Driller, Ironworker, Laborer, Painter.
• Rates and Fringes: Specific hourly rates and fringe benefits are listed for each trade, often broken down by county or specific geographic areas within counties.
• Effective Dates: Wage rates are effective as of various dates, primarily in 2024 and 2025.
• Executive Orders: Notes on Executive Orders 13706 (Paid Sick Leave) and 13658 (Minimum Wage) are included, outlining contractor obligations.

This document is crucial for bidders to understand the labor costs associated with the opportunity. It establishes the minimum wage rates and fringe benefits that must be paid to laborers and mechanics employed on the project, ensuring compliance with federal labor laws. Bidders must factor these wage rates into their cost proposals to ensure accurate and compliant bidding.