Flight Suits for the Blue Angels

Amendment / Modification

This amendment incorporates the requirements of Federal Acquisition Regulation (FAR) clause 52.222-90, "Addressing DEI Discrimination by Federal Contractors," into the solicitation.

• FAR clause 52.222-90, "Addressing DEI Discrimination by Federal Contractors" (Deviation 2026-00038), has been added by reference.

• All other terms and conditions of the original solicitation remain the same.

• The Point of Contact (POC) for this Amendment is Noni Arcilla: noni.p.arcilla.civ@us.navy.mil.

Questions & Answers / Clarifications

This document provides responses to industry questions regarding Solicitation N00244-26-Q-S023 for flight suits.

• Contract Type: This is a new and distinct requirement, not a continuation of a previous contract, though a smaller-scale contract (N6883625PS106) existed for similar items.
• Measurements: Specific measurements for the Supply Officer (SUPPO) and Public Affairs Officer (PAO) are provided, including height, collar to waist, and collar to inseam. The definition of "collar to waist" and "collar to inseam" is clarified.
• Delivery Schedule: The staged annual delivery schedule in Section C is for planning purposes only; binding quantities and delivery dates will be defined at the task order level.
• First Article Testing (FAT): The two sample flight suits submitted with the quotation will serve as the FAT units. No additional units are required post-award unless a re-test is necessary.
• Sample Submission Deadline: Sample flight suits must be received by 4:00 PM EDT on April 20, 2026. Late submissions may be deemed non-responsive.
• Patterns: Patterns for the required male and female sample suits will not be provided by the Government.
• Material Sourcing: Vendors may use available colors for non-provided materials (webbing, Velcro, zippers) for sample suits, but color matching is preferred and sourcing ability is a review factor.
• Suit Alterations: Minor deviations in fit, form, or location of elements are acceptable, especially if improvements can be made over time. The ability to alter and adjust is a key factor; a lack of alteration support would significantly reduce selection chances.
• Visual Guide: The Visual Guide (Attachment 2) should be used as a reference, and sample suits must closely match the depicted form, fit, and function, adhering to all SOW specifications.
• Pricing: On-site measurements are included in CLIN 0001 pricing. Flight suit repairs are included in CLIN 0002 pricing.

These clarifications refine requirements related to measurements, FAT, sample submissions, and pricing, impacting how bidders prepare their quotations and sample submissions.

Questions & Answers / Clarifications

This document provides answers to industry questions regarding Solicitation N00244-26-Q-S023 for flight suits.

• Contract Type: This is a new and distinct requirement, not a continuation of a previous contract, though a smaller-scale contract for similar items previously existed (N6883625PS106).
• Measurements: Specific measurements for the Supply Officer (SUPPO) and Public Affairs Officer (PAO) are provided, including height, collar to waist, and collar to inseam. References to Exhibits A and B are made for specific measurements.
• Delivery Schedule: The staged annual delivery schedule in Section C is for planning purposes only. Actual binding quantities, delivery dates, and sequence will be defined in individual Task Orders.
• First Article Testing (FAT): The two sample flight suits submitted with the quotation will serve as the First Article Test (FAT) units. No additional units are required post-award unless a re-test is necessary.
• Sample Submission Deadline: Sample flight suits must be received by 4:00 PM EDT on April 20, 2026. Late submissions may be deemed non-responsive.
• Patterns: Patterns for the required male and female sample suits will NOT be provided by the Government.
• Material Colors: For secondary materials (webbing, Velcro, elastic, zippers) not provided by the Government, vendors should aim for color match. Sourcing correct secondary materials is a factor in the review process.
• Suit Alterations: While perfect fit is not expected for samples, the ability to alter templates and adjust for fit over time is a key factor. Generic alteration requirements will not disqualify a vendor, but a lack of alteration support would significantly reduce selection chances.
• Visual Guide: The Visual Guide (Attachment 2) should be used as a reference. Sample suits must closely match the Visual Guide and adhere to all specifications in the Statement of Work (Section C) to meet the "form, fit, and function" requirements.

These clarifications provide specific details on measurements, testing, submission requirements, and evaluation criteria, impacting how bidders should prepare their quotes and sample submissions.

Questions & Answers / Clarifications

This document provides responses to industry questions regarding Solicitation N00244-26-Q-S023 for flight suits.

• Contract Type: This is a new and distinct requirement, not a continuation of a previous contract, although a smaller-scale contract for similar items (N6883625PS106) previously existed. The current solicitation has a more comprehensive scope and new terms.
• Supply Officer (SUPPO) Height: 78 inches.
• Public Affairs Officer (PAO) Height: 65 inches.
• SUPPO Collar to Waist Measurement: Refer to Exhibit A, labeled "Torso".
• PAO Collar to Waist Measurement: Refer to Exhibit B, labeled "Spine".
  • Definition: "Collar to waist" is measured from the bottom of the collar (back of the neck) down to the center-back of the Natural Waist, following the contour of the back.
• SUPPO Collar to Inseam Measurement: 39 inches.
• PAO Collar to Inseam Measurement: 30 inches.
  • Definition: "Collar to Inseam" is measured from the bottom of the collar (back of the neck) down to the crotch.
• SUPPO Hip Measurement: 43.5 inches.
• SUPPO Waist Measurement Location: Taken at the Natural Waist.

These clarifications provide specific measurements and definitions crucial for bidders to accurately quote and construct sample flight suits as required by the solicitation. The confirmation that this is a new requirement with updated terms is also significant for bidders.

Form / Attachment / Pricing Sheet

This document appears to be a sizing chart or template, likely used for garment procurement. It provides a diagram of a human body with various measurements indicated, along with a list of specific body measurements.

• Diagram: A front-facing silhouette of a person with lines indicating measurement points.
• Measurements: Specific body measurements are listed, including:
  • Around Shoulders: 56
  • Neck: 17.5
  • Chest: 50
  • Right Sleeve: 37
  • Left Sleeve: 36
  • Waist: 40
• Labeled Dimensions: Various dimensions are labeled on the diagram, such as shoulder width (21), arm length (14, 14.5), forearm length (12, 12.5), wrist circumference (7.5), torso length (26), inseam (35, 36), outseam (44, 45), and lower leg/calf measurements (19.5, 20, 17, 17, 11, 11).

This document is crucial for bidders responding to opportunities involving the procurement of clothing or uniforms. It provides the specific sizing requirements and measurements that the government will use to evaluate the fit and appropriateness of proposed items. Bidders will need to ensure their proposed products meet these specified dimensions or provide items that can be tailored to these measurements.

Form / Attachment / Pricing Sheet

This document, titled "Exhibit (E) - CDRL A002 - Flight Suit TDP.pdf", is an exhibit and likely contains a Technical Data Package (TDP) related to a flight suit. It is provided as an attachment to the opportunity record.

As a Technical Data Package (TDP), this document is expected to contain detailed specifications, drawings, and other technical information necessary for the manufacturing, inspection, and testing of the flight suit.

Bidders should review this exhibit to understand the precise technical requirements for the flight suit. This information is critical for determining the feasibility of meeting specifications, estimating production costs, and preparing a compliant proposal.

Form / Attachment / Pricing Sheet

This document is a pricing spreadsheet for the base IDIQ contract. Bidders are instructed to fill in all cells highlighted in blue, which represent the unit price for specific items or services for each performance year. Cells not highlighted in blue will be automatically calculated.

• CLIN 0001 (Construction of Flight Suits): Blue cells represent the unit price to construct one flight suit. The total maximum price for CLIN 0001 is in cell Z6.
• CLIN 0002 (Alterations and Repair of Flight Suits): Blue cells represent the hourly rate for simple, moderate, and complex alterations/repairs. The total maximum price for CLIN 0002 is the sum of cells Z8, Z9, and Z10.
• CLIN 0003 (Travel): Blue cells represent the price for one trip from the vendor location to the Navy Flight Demonstration Squadron (NFDS). The total maximum price for CLIN 0003 is in cell Z11.
• CLIN 0004 (Contract Data Requirements Lists - CDRLs): This CLIN is Not Separately Priced (NSP).
• Ordering Period: 30 June 2026 to 29 June 2031.

Bidders must use this spreadsheet to provide their unit pricing for flight suit construction, alterations/repairs, and travel. The prices entered in the blue-highlighted cells will form the basis of the IDIQ contract pricing. While annual order amounts may exceed item totals, cumulative orders cannot exceed the total maximum amounts specified in Column Z. This document is critical for preparing a compliant and competitive quote.

Solicitation / RFP / RFQ

This is a combined synopsis/solicitation (RFQ N00244-26-Q-S023) for commercial services, specifically the construction, alteration, and repair of male and female ceremonial flight suit uniforms for the Navy Flight Demonstration Squadron (NFDS). The acquisition follows FAR Part 12 and FAR subpart 16.5 procedures.

• Construction of up to 1,700 ceremonial flight suit uniforms (Royal Blue, Navy Blue, Yellow Anniversary) over a five-year Period of Performance (POP).

• Alteration and repair of existing flight suits with a 14-calendar day Turnaround Time (TAT).

• Construction of two sample flight suits (Model 1 – SUPPO and Model 2 – PAO) as part of the quote submission.

• Uniforms must meet specific material (aramid fiber blend), flame resistance, color, fit (gender-appropriate, exact fit), and construction standards (IAW NAVAIR 00-80T-123, NAVPERS 156651, PD 99-01).

• Government-furnished property (GFP) includes specific Nomex fabric colors and patches.

• Contract Type: Firm-Fixed-Price (FFP) Indefinite Delivery, Indefinite Quantity (IDIQ).

• Period of Performance (POP): Five (5) years, from 30 June 2026 to 29 June 2031.

• Questions Deadline: April 16, 2026, 4:00 PM PDT.

• Sample Flight Suit Delivery: April 20, 2026, 4:00 PM EDT.

• Written Proposal Submission: April 30, 2026, 4:00 PM PDT.

• Evaluation: Best value tradeoff. Component One (Sample Flight Suit) is evaluated first (Acceptable/Unacceptable). Only acceptable samples proceed to Component Two evaluation (Technical Proposal, Past Performance, Price).

• Not set-aside for small business concerns.

• NAICS Code: 315210 (Cut and Sew Apparel Contractors), Size Standard: 750 employees.

• Small businesses registered under this NAICS code are exempt from submitting a Subcontracting Plan.

• Offerors must submit two sample flight suits as part of Component One; costs are not reimbursed. These samples may become the First Article Test (FAT) units if approved.

• Key attachments include Pricing Spreadsheet, Visual Guide, GFP Attachment, and Past Performance Questionnaire.

Form / Attachment / Pricing Sheet

This collection of attachments, primarily Excel spreadsheets, provides detailed information related to Government Furnished Property (GFP) and provisioned items for Solicitation N0024426QS023. It includes forms for GFP management, lists of specific materials and insignia required, and definitions for units of measure and property classifications. The documents also contain helper tables for contract data entry, outlining standardized options for contract types, attachment types, and delivery events.

• Government Furnished Property (GFP): Details include attachment numbers, dates, contract numbers (N0024426QS023), consolidated GFP attachment version, and fields for contracting officer information. It also specifies contract type as DoD Contract - FAR.
• Provisioned Items: A list of specific items such as 'Royal Blue Nomex', 'Yellow Nomex', 'Navy Blue Nomex', 'American Flag Patch', and 'NFDS Crest Patch' with descriptions, quantities (e.g., 2500 Yds), and units of measure (e.g., Yds, EA). Some items are classified as 'Material' or 'Consume' and may have delivery dates.
• Requisitioned Items: Structured columns include 'LINE NUMBER', 'ITEM NAME', 'ITEM DESCRIPTION', 'NSN', 'MFR CAGE', 'PART NUMBER', 'QTY', 'UNIT OF MEASURE', and 'UNIT ACQ COST'. Several fields are marked as required.
• Definitions & Helpers: Includes a 'Unit of Measure' sheet with various units and a 'Property Definitions' sheet classifying property (Equipment, Material, etc.) and usage (Consume, Return, etc.). Helper tables provide standardized dropdown options for 'Attachment Types', 'Contract Number Types' (e.g., DoD Contract - FAR/Non-FAR), 'Property Classifications', 'Property Usages', and 'Time Units'.

Bidders must thoroughly review these attachments to understand the specific GFP requirements, the exact materials and insignia needed, and the government's requisitioned items. This information is critical for accurately calculating costs, formulating technical approaches, ensuring compliance, and managing resources. Understanding the property classifications and units of measure is essential for proper contract administration and proposal preparation. The helper tables provide insight into the standardized government terminology and data entry conventions that may be encountered.

Form / Attachment / Pricing Sheet

This document provides a visual guide to a sample Blue Angels' flight suit, showcasing its appearance from various angles. It serves as a reference for understanding the design and features of the flight suit.

• Images of a sample Blue Angels' flight suit.
• Depictions from multiple angles, including full front and back views.
• Specific images highlight different colors (Yellow and Blue) and logos.

This visual guide is relevant for bidders who may be required to provide or manufacture flight suits. It offers a clear, visual representation of the expected design, color scheme, and potential logo placements, aiding in the accurate preparation of proposals or the understanding of product specifications.

Statement of Work (SOW) / Performance Work Statement (PWS)

This document outlines the requirements for services to be provided, focusing on operational hours, quality control, security, safety, and personnel conduct.

• Hours of Operation: Services are required Monday through Friday, 5 am to 4 pm PST, excluding Federal holidays. The contractor must maintain adequate staffing for uninterrupted service.

• Quality Control: The Contractor is responsible for delivering quality services in accordance with FAR 52.212-4(b).

• Security Access: Contractor personnel must comply with installation access and local security policies, including background checks and identity verification. Access to classified information is prohibited.

• Safety: Compliance with 29 CFR 1910 (Occupational Safety and Health Standards) and all applicable DoD, Navy, Federal, State, and Local safety and environmental regulations is mandatory. The contractor is liable for violations and must report hazards and mishaps.

• Personnel: The Contractor shall provide trained, competent, and capable personnel who present a professional appearance. Employees must meet all applicable certification, licensing, and medical requirements. Personnel must be able to communicate fluently in English. Conflicts of interest must be avoided and reported.

• Contractor Conduct: Employees must conduct themselves professionally, safely, and responsibly, adhering to all local policies regarding safety, security, and conduct. Misconduct or security concerns may result in removal from the job site.

• Quality Control: Contractor is responsible for quality assurance.

• Safety: Compliance with OSHA and other safety regulations is required.

• Reporting: Mishaps and safety hazards must be reported according to specified procedures.

• Hours of operation are specified (5 am - 4 pm PST, Mon-Fri).

• Specific location is implied to be a Government facility (NAS Pensacola mentioned in relation to vehicles).

• Personnel: English fluency, professional appearance, adherence to security and safety plans, valid driver's licenses for vehicle operators.

• Vehicles: Contractor vehicles must be identifiable and registered/licensed for Naval Air Station (NAS) Pensacola operational areas.

• Advertising: No advertising is permitted on Government property.

• Supervision: The Government will not supervise contractor employees; accountability rests solely with the Contractor.

Form / Attachment / Pricing Sheet

This document is a Purchase Description (PD) for "COVERALLS, FLYER'S, MEN'S, SUMMER, FLAME-RESISTANT". It details the specifications, requirements, and manufacturing operations for the CWU-27/P coverall.

• Scope: Covers requirements for the CWU-27/P coverall for flight personnel.
• Classification: Available in Class 1 (Sage Green 1590) and Class 2 (Tan 380).
• Sizes: Available in even sizes 32 to 52, in Short, Regular, and Long lengths.
• Applicable Documents: Lists numerous Federal and Non-Government publications (specifications, standards, test methods) that must be adhered to.
• Requirements: Details the construction, materials (basic material, thread, fasteners, elastic webbing, grommets, cord, reinforcement webbing, binding tape, slide fasteners), and features of the coverall, including pocket configurations and closures.
• Manufacturing Operations: Provides a detailed table of operations, including cutting, overedging, collar construction, sleeve and waist tabs, pocket assembly, seams, and finishing.
• Finished Measurements: Includes tables with specific measurements for various sizes and lengths.
• Verification: Outlines inspection classifications, first article inspection, and quality conformance inspection procedures.

This document is critical for any bidder intending to manufacture or supply these flame-resistant coveralls. It serves as the primary technical specification, outlining all material, construction, dimensional, and quality requirements. Bidders must ensure their products and manufacturing processes fully comply with all details presented in this Purchase Description.

Form / Attachment / Pricing Sheet

This document, titled "Exhibit (D) - CDRL A001 - Property Control Plan," is an attachment to the SAM.gov opportunity record. It outlines the requirements for a Property Control Plan, likely a deliverable or a plan required from the contractor.

• The document specifies the format and content required for a Property Control Plan.
• It details the government's expectations regarding how property will be managed, tracked, and controlled by the contractor.

Bidders should review this exhibit to understand the specific requirements for property control that will be imposed if they are awarded the contract. This will impact their operational planning and proposal development, particularly concerning how they will manage government-furnished property or contractor-acquired property.

Form / Attachment / Pricing Sheet

This document is a Past Performance Questionnaire (PPQ) intended for use by contractors and their previous clients. It serves as a critical component of the government's evaluation process for an unspecified solicitation. The information gathered will assess the past performance of offerors.

• Contractor Section (Section I): To be completed by the offeror, detailing a recent and relevant contract (performed within 5 years of solicitation issuance, similar in complexity, scope, and magnitude). This section requires information on the contract number, title, description of work, period of performance, total value, and client point of contact.
• Respondent Section (Section II): To be completed by the contractor's previous client. It requires ratings (Exceptional, Very Good, Satisfactory, Marginal, Unsatisfactory, N/A) and supporting narratives for various performance areas, including Quality of Product, Schedule & Delivery, Contract & Business Management, and Overall Performance. Specific questions address strengths, weaknesses, and the likelihood of awarding future contracts.
• Respondent Information (Section III): To be completed by the client POC, including name, title, organization, and contact details.

Offerors must complete Section I for each past performance reference and submit the entire form to their client POC. The client is instructed to complete Sections II and III and submit the form directly to the government contracting team (Noni Arcilla and Naima Yelda) by April 30, 2026, 4:00 PM PDT. Contractors are strictly prohibited from receiving the completed questionnaire from their client, as this may lead to their quotation being deemed ineligible. This questionnaire is crucial for demonstrating relevant past performance to the government.

Form / Attachment / Pricing Sheet

This document, titled "Exhibit (B) - Model 2 - PAO.pdf", appears to be a measurement chart or template for body measurements, likely intended for garment sizing or fitting. The "PAO" likely refers to "Pre-Award Order" or a similar designation within a procurement context.

• A diagram of a human figure with various body parts indicated.
• Measurements are provided for specific points on the body, including:
  • Around shoulders
  • Neck
  • Sleeve length (right and left)
  • Chest/Bust
  • Waist
  • Hips
  • Various leg measurements (inseam, thigh, calf, ankle)
• Measurements are listed in inches.

This document is relevant to bidders as it provides specific sizing and measurement requirements. Vendors may need to use this chart to understand the dimensions of the intended recipients or to ensure their proposed products or services meet these specified measurements. It could be a critical attachment for opportunities involving apparel, uniforms, or any item requiring precise body fit.

Statement of Work (SOW) / Performance Work Statement (PWS)

To provide gender-specific ceremonial uniform construction services for the Navy Flight Demonstration Squadron (Blue Angels) located at NAS Pensacola, FL. The uniforms are vital for showcasing the pride and professionalism of the U.S. Navy and Marine Corps.

• Construction, alteration, and repair of male and female ceremonial flight suits (Officer, Fat Albert, and #7 Crew Chief).

• Approximately 102 Royal Blue Flight Suits (Officer) and 21 Navy Blue Flight Suits (Fat Albert/Crew Chief) annually.

• Option for approximately 51 Yellow Flight Suits (Officer) for "anniversary" seasons.

• Uniforms must comply with U.S. Navy Uniform Regulations (NAVPERS 156651, Chapter 6, Section 2, Article 6201.4) and this PWS.

• Requires flexibility to accommodate the Blue Angels' operational tempo for as-needed alterations.

• Contractor must comply with all applicable federal, state, and OSHA regulations.

• Uniforms must meet safety, operational, and mission requirements.

• Custom tailoring to individual measurements.

• Gender-appropriate patterns.

• Specific color requirements (Royal Blue, Navy Blue, Anniversary Yellow) and stripe placement.

• Custom gold embroidered name tags and Blue Angels crest.

• American flag on left sleeve, two-pen pocket on right sleeve.

• Zipper from collar to inseam with Velcro waist belt.

• Ankle pockets.

• Flame-resistant material (Aramid fiber blend: 92% meta-aramid, 5% para-aramid, 3% conductive fiber).

• Electrostatic decay, pH, curling, dimensional change, seam efficiency, toxicity, and workmanship standards must be met.

• Use of recycled, recovered, environmentally preferable, or biobased materials encouraged.

• Tentative Period of Performance: June 30, 2026 – June 29, 2031 (Base period plus four option years).

• Location: Services performed in support of Blue Angels at NAS Pensacola, FL.

• Contractor must provide all personnel, equipment, supplies, and services, except for Government Furnished Property (GFP) and materials (e.g., American flags, Blue Angel patches, approved flight suit fabric).

• Contractor must provide a Property Control Plan.

• Vendor travel to Pensacola, FL is required for measurements and fittings during specific periods (e.g., July, August, September).

• Strict delivery schedules for flight suits based on team selection and roles are outlined.

Other / Unclassified

This document is a market research notice from NAVSUP Fleet Logistics Center, San Diego (FLCSD) seeking industry feedback on the draft Performance Work Statement (PWS) for ceremonial flight suit construction, alteration, and repair services for the U.S. Navy Flight Demonstration Squadron, "The Blue Angels." It is for planning purposes only and not a solicitation. The government is gathering information to identify qualified sources and inform acquisition strategies.

• Requirement: Construction, alteration, and repair of ceremonial flight suits for the Blue Angels.
• Anticipated Contract: Firm-fixed-price (FFP) contract with a 12-month base period and four 12-month option periods.
• NAICS Code: 315210 (Cut and Sew Apparel Contractors) with a small business size standard of 750 employees.
• Industry Day: Scheduled for February 13, 2026, at Naval Base San Diego. Attendance is encouraged. Contractors must RSVP by February 10, 2026, with attendee information and suggested discussion topics.
• Submission Requirements (Due February 18, 2026, 12:00 PM PST):
  • Capability Statement (max 10 pages) demonstrating ability to meet material, workmanship, and performance standards, referencing the Draft PWS and Visual Guide.
  • Prior Experience Citations (1-3 citations) in the specified format, detailing relevant experience.
  • Market Research Questionnaire (includes company info, small business status, socio-economic program eligibility, and specific questions about the PWS, delivery schedule, and capabilities).
• Key Information Requested: Vendors are asked to provide feedback on the draft PWS, suggest alternative approaches, identify restrictive requirements, assess delivery schedule achievability, and describe their quality control processes.

Form / Attachment / Pricing Sheet

This document provides a visual guide to a sample Blue Angels' flight suit, showcasing its appearance from various angles. It serves as a reference for understanding the design, features, and details of the flight suit.

• Detailed images of a yellow sample flight suit (Pictures Y1-Y9).
• Detailed images of a blue sample flight suit (Pictures B1-B5).
• Close-up images of logos, including the Blue Angels emblem and an American flag patch (Pictures L1-L2).
• Full front and back views of both yellow and blue suits.

This visual guide is relevant for bidders who need to understand the specific design, construction, and aesthetic requirements for flight suits related to this opportunity. It provides a clear reference for the expected appearance and details, aiding in proposal preparation and ensuring alignment with the government's expectations.