GMF Rochester Ranger District Office Fleet Garage

Amendment / Modification

• The closing date for the solicitation has been extended.

• The closing date is extended until April 13, 2026, at 1:00 p.m. eastern time.

• The proposal submission deadline has been moved to April 13, 2026.

Questions & Answers / Clarifications

This document provides clarifications and answers to vendor questions regarding Solicitation 12445526Q0035, specifically concerning the construction of a garage.

• Taxes: Proposals should include taxes.
• Permits: No state, local, or federal permits are required for this project.
• Hazardous Materials: There are no known hazardous materials.
• Garage Purpose: The garage is strictly for parking vehicles, not for maintenance or repair.
• Flammable Materials: No flammable or hazardous materials will be stored in the building, other than vehicle fuel tanks.
• Roofline: The Base Bid and Optional Bid represent two different garage configurations; only one will be awarded.
• Heating/Cooling: The building will be unconditioned.
• Plumbing: Plans include gutters and downspouts for drainage. The garage does not have water or sewer service, but a sewer cleanout will be raised to meet new grading.
• Floor Drains: There are no floor drains required; gutters drain to the grass.
• Sprinklers/Fire Alarm: No sprinklers or fire alarm systems are required.
• Lighting: Lighting control will use a 3-way wall switch with a sensor.
• Garage Doors: Garage doors will be manual.
• Siding: Horizontal metal siding is preferred, but vertical metal siding is acceptable if it offers cost savings, provided it meets specified thickness, finish, and color.
• Superintendent/SSHO/QC: A full-time Superintendent is required (see FAR Clause 52.236-6). No QC Manager is required, but quality control must follow specifications. No SSHO is required. The Superintendent may also serve as QC Manager.
• Bid Bond: A bid bond on an SF24 is required.
• Foundation: The foundation system is to be designed by the contractor. Footing foundation drains are not required. Foundation waterproofing is not required unless deemed necessary by the contractor's engineer.
• Permits: A VT Fire and Safety Permit is not required as this is a federal project.

These clarifications address specific requirements and details of the solicitation, impacting how bidders should prepare their proposals, including pricing, material choices, and submission requirements. Bidders should review these answers carefully to ensure their proposals meet all clarified expectations.

Amendment / Modification

• This amendment (0002) to the solicitation is effective 03/05/2026.

• The purpose of this amendment is to add a revised Q&A document.

• The document references a revised Q&A document, implying it is an attachment or addition to the original solicitation.

• The amendment does not explicitly state if proposal deadlines or evaluation factors have been modified, but it does note that offers must acknowledge receipt of this amendment prior to the specified hour and date.

Amendment / Modification

This document is Amendment 002 for Solicitation 12445526Q0035, providing answers to vendor questions.

Key clarifications include:

• Taxes should be included in proposals.
• No state, local, or Federal permits are required.
• No known hazardous materials are present.
• The garage is for parking only, not maintenance or repair.
• The building will be unconditioned (no heating or cooling).
• Floor drains are not required; gutters will drain to the grass.
• Lighting control will use a 3-way wall switch with a sensor.
• Garage doors will be manual.
• No fire alarm is required.
• The contractor is responsible for determining electrical service capacity and site-specific geotechnical requirements.
• The 12" HDPE culvert installation requires flared end sections only; no headwalls or riprap.
• Typical slab thickness is 4"; frost depth determination is the contractor's responsibility.
• Ridge vents or insulation roof blankets are acceptable, but not both.
• No fire-rated wall, draft stop, or fire separation is required between the new garage and adjacent buildings.
• The contractor is responsible for verifying existing workshop siding and roof colors.
• Site clearing includes cutting and disposing of existing trees.
• Pricing for both Base Bid and Optional Bid SOI's is required.
• A bid bond on SF24 is required.

This amendment clarifies various aspects of the original solicitation, including requirements for permits, hazardous materials, utilities, construction details (e.g., slab thickness, culverts, insulation), and submission requirements (e.g., taxes, bid bond form).

Vendors should incorporate these clarifications into their proposals. Specifically, they need to account for taxes, understand the unconditioned nature of the building, and adhere to the specified construction and submission requirements. The original solicitation documents and any referenced specifications should be reviewed in light of these answers.

Other / Unclassified

This document is a General Decision Number (VT20260023) dated 01/02/2026, which supersedes VT20250023. It provides prevailing wage rates for various construction crafts in Windsor County, Vermont, specifically for Building Construction Projects (excluding single-family homes and apartments up to four stories).

This document is relevant to bidders as it outlines the minimum wage rates and fringe benefits required for laborers and mechanics employed on federal or federally funded construction projects in the specified geographic area and for the specified construction type. Bidders must consider these wage rates when preparing their proposals and ensuring compliance with labor standards if awarded a contract. The document details rates for trades such as Carpenters, Electricians, Ironworkers, Sheet Metal Workers, Plumbers, Roofers, and Sprinkler Fitters, among others. It also includes important notes regarding paid sick leave (Executive Order 13706) and minimum wage requirements (Executive Order 13658) for federal contractors, as well as the process for appealing wage determinations.

Amendment / Modification

• The purpose of this amendment is to add a Q&A document.

• Not specified, but implies the addition of a Q&A document to the solicitation.

• The amendment does not explicitly state if proposal deadlines or requirements were modified, but it does note that offers must acknowledge receipt of this amendment prior to the specified hour and date.

Questions & Answers / Clarifications

This document provides responses to vendor questions and clarifications regarding Solicitation 12445526Q0035 for a garage project.

• Taxes: Proposals should include taxes.
• Permits: No state, local, or Federal permits are required for this project.
• Hazardous Materials: There are no known hazardous materials.
• Garage Purpose: The garage is for parking vehicles only, not maintenance or repair.
• Flammable Materials: No flammable or hazardous materials will be stored in the building, other than vehicle fuel tanks.
• Garage Configuration: The Base Bid and Optional Bid represent two different garage configurations; only one will be awarded.
• Heating/Cooling: The building will be unconditioned.
• Plumbing: Plans include gutters and downspouts. The proposed garage does not have water or sewer, but the contractor shall raise an existing sewer cleanout to meet new grading.
• Floor Drains: There are no floor drains required.
• Gutters/Downspouts: Gutters and downspouts are to drain onto the grass.
• Sprinklers: The building will not be sprinklered.
• Lighting: Lighting control will utilize a 3-way wall switch with a sensor.
• Block Heaters: Vehicles will not be using block heaters.
• Garage Doors: Garage doors will be manual.
• Fire Alarm: No Fire Alarm is required in the building.
• Electrical Capacity: Contractors are responsible for determining if the existing electrical service can support the new garage and may visit the site.
• Geotechnical Report: No existing geotechnical report is available.
• Utilities: There are no other known undocumented utilities.
• Culvert Installation: The 12" HDPE culvert requires flared end sections as per plans; no headwalls, riprap, or other end treatments are specified.
• Slab Thickness: Typical slab thickness is 4".
• Frost Depth: Determining frost depth for foundation and slab edge design is the contractor's responsibility.
• Color Matching: Contractors are responsible for verifying existing workshop siding and roof colors and may visit the site.
• Roof Vent/Blanket: A ridge vent or an insulated roof blanket (R-10) is acceptable; both are not required.
• Fire Separation: No fire-rated wall, draft stop, or fire separation is required between the new garage and adjacent existing buildings.
• Temporary Power: Refer to Paragraph 1.2.D in the Summary Section of the Specifications.
• Working Hours: Refer to Paragraph 1.2.B in the Summary Section of the Specifications.
• Eave Height: An eave height of 12' is acceptable if the maximum building height on the plans is not exceeded.
• Davis-Bacon Wages: These are posted to sam.gov with the solicitation documents.
• Siding: Horizontal metal siding is preferred, but vertical metal siding is acceptable if cost savings are realized, provided it meets specified thickness, finish, and color.
• Superintendent/SSHO/QC: A full-time Superintendent is required (see FAR Clause 52.236-6). No QC Manager is required, but contractors must follow the Quality Control Section of the Specifications. No SSHO is required. The Superintendent may also serve as SSHO and QC Manager.
• Site Clearing: Includes cutting and disposing of the existing tree where the proposed building is located.

These clarifications provide specific details and confirm requirements, which may impact bidding strategies and proposal preparation. Bidders should review these responses carefully to ensure their proposals align with the clarified information.

Other / Unclassified

This document contains photographs of the existing workshop and electrical panels at the GMNF Rochester Fleet Garage.

These photos provide visual context for the current state of the facility. Bidders may use these images to better understand the existing conditions relevant to any potential work at the Rochester Fleet Garage.

Form / Attachment / Pricing Sheet

This document contains product data sheets for various lighting and security products.

• Redi-Rock Freestanding Straight Blocks: Details dimensional properties, concrete mix properties, and exposure class requirements.
• Metalux APVT LED Vaportite: Provides specifications, order information, product features, and dimensional details for industrial LED lighting.
• Lithonia Lighting WDGE LED: Details specifications, family overview, ordering information, and photometric data for architectural wall sconces.
• Sure-Lites SEL Emergency Light: Includes product features, dimensional details, catalog logic, electrical characteristics, and photometry for LED emergency lights.
• Sure-Lites APX Series LED Exit Sign: Outlines product features, dimensional details, order information, and energy/performance data for LED exit signs.
• Intermatic Mechanical Time Switch (T101PCD82): Provides product description, features, applications, technical data, and specifications for a 24-hour mechanical time switch.
• Leviton Decora Motion Sensors: Details flexible wiring options, applications, specifications at-a-glance, and wiring diagrams for motion sensors.
• Alarm Lock Trilogy T2 DL2700: Describes features, specifications, and available models for electronic keyless access locks.

This document provides detailed technical specifications, ordering information, and product features for a variety of electrical and security hardware. Bidders can use this information to understand the specific products and their capabilities, which may be relevant for procurement or installation planning related to the opportunity.

Forms / Attachments / Pricing Sheets

This document set contains architectural and engineering plans for the construction of a Fleet Garage for the Rochester Ranger District Office, Green Mountain National Forest. It includes details for both a base bid and an optional bid.

• Cover Sheet: Lists all included sheets and their titles.
• Notes: Provides general and specific instructions for the contractor, including site conditions, demolition, site access, and erosion control.
• Site Plans: Detail existing conditions, proposed grading, utility locations, and site layout for both base and optional bids.
• Building Plans: Show the layout, dimensions, and structural intent for the proposed garage building for both base and optional bids.
• Building Elevations: Illustrate the exterior appearance of the proposed garage.
• Building Details: Provide specific construction details for walls, foundations, slabs, and entrances.
• Electrical Plan: Outlines the electrical layout, fixtures, and service connections.

These plans are essential for potential bidders to understand the full scope of work, including site preparation, building construction, and utility connections. Bidders must review these documents to accurately estimate costs, develop construction methodologies, and ensure compliance with all specified requirements for both the base and optional bid scenarios.

Form / Attachment / Pricing Sheet

This document contains the "Specifications" for the Rochester Ranger District Garage project. It details the requirements for various aspects of the construction, including general requirements, concrete work, special construction (metal building systems), electrical systems, earthwork, bituminous concrete paving, turf and grass, and site improvements.

• General Requirements (Division 01): Covers project management, submittal procedures, quality control, execution requirements, closeout procedures, and measurement and payment.
• Concrete (Division 03): Specifies requirements for cast-in-place concrete.
• Special Construction (Division 13): Details requirements for pre-engineered metal building systems.
• Electrical (Division 26): Outlines scope of work, wire and cable, supporting devices, grounding, panelboards, lighting fixtures, and emergency lighting equipment.
• Earthwork (Division 31): Covers site clearing, earth moving, and grading.
• Paving (Division 32): Includes bituminous concrete paving and turf and grass installation.
• Site Improvements (Division 32): Details requirements for site improvements.

This document is crucial for potential bidders as it outlines the comprehensive technical specifications and requirements for the construction of the Rochester Ranger District Garage. Bidders must review these specifications to understand the scope of work, materials, quality standards, and execution methods required to accurately estimate costs and develop a compliant proposal. The detailed breakdown across various divisions (e.g., structural, electrical, site work) provides a clear understanding of the project's complexity and specific demands.

Form / Attachment / Pricing Sheet

This document is an Independent Government Estimate for an optional bid related to the Rochester District Office Fleet Garage, located within the Green Mountain National Forest, Rochester Ranger District, Windsor County, Vermont. It outlines estimated quantities for various work items.

• Divisions: General Requirements (01), Concrete (03), Special Construction (13), Electrical (26), Earthwork (31).
• Units: All listed items are "Lump Sum".
• Estimated Quantity: All listed items have an estimated quantity of "1".
• Pricing: Fields for "Unit Price" and "Total Price" are provided for bidders to complete.

This document provides the government's estimate for optional bid items. Bidders should use this as a reference when preparing their pricing proposals for these optional services. The "Unit Price" and "Total Price" columns are to be filled in by the bidder.

Solicitation / RFP / RFQ

This document is a combined synopsis/solicitation for commercial items, prepared in accordance with FAR Part 12. It serves as the sole solicitation, and no separate written solicitation will be issued. The U.S. Department of Agriculture, Forest Service, Rochester Ranger District Office, is issuing this Request for Quotation (RFQ) for a pre-engineered building for their Fleet Garage. The building will require exterior matching existing Rochester Workshop, foundations below frost depth, concrete slab floor, power, lighting, site work, and other miscellaneous items as shown on the Project Plans.

• Pre-engineered building with exterior to match existing Rochester Workshop.

• Foundations designed by the contractor or manufacturer, below frost depth.

• Building to include a concrete slab floor, power, lighting, site work, and other miscellaneous items as detailed in the Project Plans.

• The acquisition is set-aside for small business concerns.

• Award Type: Firm-fixed price.

• Period of Performance: 365 days from the issuance of the notice to proceed.

• Quotes are due by April 3, 2026, at 1:00 PM Eastern Time.

• Quotes should be sent to Brad Higley at Bradley.higley@usda.gov.

• A bid bond is required.

• Award will be made to the lowest priced, responsible offeror who is responsive to the solicitation.

• Evaluation will be based on criteria in FAR 12.203, with award made to the offeror representing the best value to the Government.

• Questions are due by March 18, 2026, at 12:00 PM Eastern Time, and should be emailed to bradley.higley@usda.gov.

• This acquisition is a Total Small Business Set-Aside.

• All responsible sources may submit a quotation.

• The solicitation incorporates provisions and clauses by reference, accessible electronically at www.acquisition.gov.

• Applicable North American Industry Classification Standard (NAICS) Code: 238190.

• Small business size standard: $19 million.

• Attachment 1 - Solicitation Terms and Conditions contains applicable clauses, instructions, and evaluation criteria.

• Technical data includes specifications, product data sheets, and plans for the fleet garage.

Form / Attachment / Pricing Sheet

This document is an Independent Government Estimate for the Rochester District Office Fleet Garage project. It outlines the estimated costs for various components of the base bid.

• Divisions: Includes General Requirements, Concrete, Special Construction, Electrical, and Earthwork.
• Units: All listed items are "Lump Sum".
• Estimated Quantity: All listed items have an estimated quantity of 1.
• Pricing: Fields for "Unit Price" and "Total Price" are provided but are blank, indicating that bidders are expected to fill these in.
• Base Bid Total: A field for the total base bid amount is also present.

This estimate serves as a benchmark for bidders to understand the government's anticipated cost for the project. Bidders will use this structure to provide their own pricing for each line item and the total bid.