Greenhouse Roof Replacement and Rail Replacement

Form / Attachment / Pricing Sheet

This document is a General Decision Number (GDN) for wage determination, specifically for Building Construction Projects in Terrebonne County, Louisiana. It outlines the prevailing wage rates and fringe benefits for various construction trades. Bidders should use this information to ensure compliance with labor standards for the specified construction type and location.

• General Decision Number: LA20260046, dated 01/30/2026.
• Construction Type: Building (excluding single-family homes or apartments up to 4 stories).
• Location: Terrebonne County, Louisiana.
• Trades and Rates: Includes wage and fringe rates for Asbestos Worker, Electrician, Power Equipment Operator (Crane), Ironworker, Painter, Cement Mason/Concrete Finisher, Plumber/Pipefitter, Sheet Metal Worker (HVAC Duct Installation), Bricklayer, Carpenter, Laborer (Common/General and Mason Tender), Operator (Backhoe/Excavator/Trackhoe), Roofer, Sheet Metal Worker (excluding HVAC Duct Installation), Tile Setter, and Dump Truck Driver.
• Executive Orders: Notes applicability of Executive Order (EO) 13706 (Paid Sick Leave) and EO 13658 (Minimum Wage) for federal contractors.
• Appeals Process: Outlines the procedure for appealing wage determination decisions.

This document is critical for bidders to understand the minimum wage and fringe benefit requirements for laborers and mechanics employed on the covered construction work. Failure to comply with these prevailing wage rates can lead to contract violations and penalties. Bidders must factor these costs into their proposals to ensure accurate and competitive pricing.

Solicitation / RFP / RFQ

This solicitation is for the Greenhouse Roof Replacement and Rail Replacement project at the USDA Sugarcane Research Site in Schriever, Louisiana. The government intends to make one firm fixed-price award.

• Replacement of greenhouse roofs.

• Replacement of greenhouse rails.

• The roof replacement can begin after the Notice to Proceed (NTP).

• Rail replacement cannot begin until December 2026.

• Contract Type: Firm Fixed-Price.

• Period of Performance: 10 months, broken into two phases.

• Estimated Value: Not specified.

• Proposals are due by 04/29/26 at 0630 AM CST and must be emailed to david.reynolds2@usda.gov.

• A mandatory site visit is scheduled for 04/23/26 at 0900 AM CST. Registration is required by 04/22/26.

• Award will be made to the lowest priced technically acceptable offeror.

• Offers must be valid for 90 calendar days.

• Offerors must provide at least two recent (within 5 years) and relevant references for similar greenhouse renovation projects.

• Competition is set aside for Total Small Business.

• Applicable NAICS code: 236220, Commercial and Industrial Construction.

• Prospective offerors must be registered in the System for Award Management (SAM) at the time of solicitation closing.

• Several attachments are referenced, including Statement of Work, Rail Drawings, Rail Specifications, Roof Specifications, and Wage Determination.

• RFIs are due no later than 4/29/26 at 0630 AM CST.

Statement of Work (SOW) / Performance Work Statement (PWS)

This SOW outlines the requirements for two distinct construction projects at the USDA Sugarcane Research Site in Houma, LA: replacement of a greenhouse roof and replacement of photoperiod rails.

Scope A: Replacement of the Crossing Greenhouse Roof

• Replace existing 16mm double-skinned acrylic roof panels with new impact-modified acrylic panels.
• Remove and dispose of old panels and gaskets; clean metal frames.
• Replace panels in existing ridge and eve vents.
• Repair and adjust alignment of 3 damaged south-side ridge vent drive rods.
• Inspect other ridge and eve vent components, reporting conditions and recommended repairs for future action.
• Provide a water-tight roof.
• Conduct a systematic water test witnessed by government personnel, including JSA, radio communication, and repair of any leaks.
• Panels must meet DIN 5063 for 70% light transmission after 10 years and ASTM D-635 for flammability.
• A one-year warranty on installation for a leak-free roof is required.
• This is an emergency repair, requiring completion as soon as possible.

Scope B: Replacement of Photoperiod Rails

• Remove and replace existing steel rails and fasteners for twelve sugarcane carts.

• Saw-cut and grind approximately 3" x 3" slots adjacent to existing concrete slots.

• Clean concrete for adhesive application.

• Install continuous FRP extrusions (2-part assemblies) for cartwheels.

• Grout an FRP trough into the resized concrete slot.

• Grout a hollow fiberglass rail into the trough using a thin system adhesive.

• Fill the fiberglass rail with 9000 PSI non-shrink epoxy grout.

• Contractor to provide FRP extrusions, adhesive, and epoxy grout.

• Rail replacement must be completed during winter months (December 2026 - March 2027).

• Location: USDA Sugarcame Research Site, 501 Bull Run Road, Houma, LA.

• Scope A: To be completed as soon as possible.

• Scope B: December 2026 - March 2027.

• Submittals are required and must be government-signed off.

• Davis-Bacon wages apply.

• Bid bonds, bid guarantee, and construction payment and performance bonds are required.

• Tentative contract award: Spring 2026.

Form / Attachment / Pricing Sheet

This document provides detailed drawings and specifications for the repair of a "Photometric Bldg Rail" at the USDA Sugarcane Research Laboratory in Houma, LA. It outlines the materials and methods for replacing existing structural fiberglass track rails.

• Drawings: Includes detailed cross-sections and views of the rail installation, showing existing conditions and proposed repairs.
• Materials Specified: Requires 60' structural fiberglass track rail with a minimum 30,000 PSI compressive strength, high-strength epoxy grout (e.g., SIKAGROUT 713 or SIKADUR-42 GROUT-PAK), and polyurethane elastomeric sealant (e.g., SIKAFLEX NP 1 or SIKAFLEX SL 1).
• Installation Requirements: Details surface preparation, setting the rail in a concrete trough, full bearing support with grout, and sealing of exposed top joints.
• Performance Requirements: Emphasizes that the installed rail must be fully supported, true to line and grade, and capable of transferring service loads.

This attachment is crucial for bidders to understand the specific technical requirements for the rail repair work. It dictates the type of materials to be used, the installation methodology, and the expected performance standards. Bidders must ensure their proposals and execution plans align with these detailed specifications.

Form / Attachment / Pricing Sheet

This document provides detailed specifications for Fiberglass Reinforced Polymer (FRP) profiles intended for the Houma Rail Replacement project. It outlines the requirements for two specific FRP profiles (Item 001 and Item 002) and the overall system description.

Item 001: Fiberglass Rail Profile

• Description: 3.504"x2.938" Tall x ½" thick, Hollow Custom rail profile.
• Material: Fiberglass Reinforced Polymer Profile with Polyester resin (Vinyl Ester resin is not recommended).
• Load Support: Must support a wheel load of 900lbs over a 12-inch span.
• Tolerances: Governed by ASTM D3917-15, ASTM D4385-13, LPI, or Print standards.
• Other: Standard color, contractor to verify lengths and lead time.

Item 002: Fiberglass Trough Profile

• Description: 7.875"x3.125”x3.875"x1/8 Fiberglass Trough Profile.
• Material: Fiberglass Reinforced Polymer Profile with Polyester resin.
• Load Support: Must support a wheel load of 900lbs over a 12-inch span.
• Tolerances: Governed by ASTM D3917-15, ASTM D4385-13, LPI, or Print standards.
• Other: Standard color, contractor to verify lengths and lead time.

System Description

• Components: FRP Structural Member (pultruded FRP tube with 1/2-inch thick walls), Epoxy Grout Infill (9,000 psi compressive strength), Support Condition (24-inch thick concrete slab), Adhesive/Sealant Bedding Layer.
• Service Loading: Steel wheel passes over FRP surface twice daily, with a contact stress of approximately 2,000 psi.
• Structural Performance: FRP shell operates at 6-7% of ultimate strength; grout core operates at 20-25% of compressive strength, indicating a substantial margin.
• Environmental Performance (Houma, Louisiana): System is suitable for hot, humid, coastal conditions due to corrosion resistance of FRP and grout. Moisture and temperature stability are noted.

This document is critical for bidders to understand the specific material and performance requirements for the FRP components of the rail system. It details the dimensions, material properties, load-bearing capabilities, and environmental considerations that must be met. Bidders must pay close attention to the specified resin type, load support requirements, and tolerances. The system description provides context on how these components integrate into the overall structure and perform under expected conditions.

Form / Attachment / Pricing Sheet

This document contains detailed architectural and structural drawings for the Sugarcane Research Laboratory's "Crossing Facility" greenhouse, including specifications for materials, dimensions, and construction. It also includes a "Shop Drawing Review" for the "Greenhouse Vent System Resubmittal," checking design concept and compliance with contract documents.

• Architectural & Structural Drawings: Site plan, greenhouse structure and glazing details (trusses, purlins, tempered glass, 16mm white acrylic), ventilation systems (ridge and side vents), wall sections, and structural details.
• Material Specifications: Technical data for "DEGLAS IMPACT SDP® 16 NO DRIP®" acrylic sheets and "Thermolite™" insulated ACM panels, including properties like light transmittance, R-value, and fire ratings.
• Installation Guidelines: Instructions for storage, cutting, fastening, and installation of glazing materials.
• Vent System Review: Specific notes on "Totally Enclosed" motors, NEMA 4 electrical boxes, and outdoor installation certification. The review is marked as "Reviewed and Accepted as noted."

This document is critical for bidders involved in the construction or renovation of the greenhouse facility. It defines exact specifications for materials, structural integrity, and aesthetic requirements. Bidders must review these drawings and specifications to ensure their proposals and work align with the government's requirements for the greenhouse construction, including specific glazing types, structural components, and installation methods. Bidders involved in mechanical or electrical aspects of the ventilation system should note the specific requirements and review status for compliance.