Intake Plug and Exhaust Cover (Amended)

Amendment / Modification

This amendment (0001) to Solicitation FA301626Q0068, dated 07 Apr 2026, incorporates the following:

• Intake and Exhaust Measurement document
• Questions and Answers in Response to RFQ
• PDF Insignia

New attachments have been added to the solicitation.

This amendment does not extend the hour and date specified for receipt of offers. Bidders should review the newly added attachments for any impact on their proposals.

Questions & Answers / Clarifications

This document provides answers to vendor questions regarding the Intake Plug and Exhaust Cover Request for Quote (RFQ).

• NSN Sponsorship: The government will not sponsor a National Stock Number (NSN) for this request.
• Berry Compliance: Suppliers must be Berry Compliant, as per Revolutionary FAR Overhaul (RFO) 52.225-1 Buy American-Supplies clause in the RFQ.
• Squadron Logo: The squadron logo is provided as a PDF file (attachment 5). It will be stitched or printed; Velcro is not acceptable.
• Identification Marking: The requirement for identification marking will be met by stitching or printing the logo.
• Technical Specifications: Detailed specifications, including dimensions for intake and exhaust openings, spacing, cover depth, strap anchor location, streamer size, and photos of existing parts, are provided in attachment 6. Note that measurements may not align with the vendor's design.

This Q&A document clarifies requirements and provides additional technical details that may impact how vendors prepare their quotes and designs. It does not appear to alter submission deadlines or evaluation factors.

Other / Unclassified

This document is an image of a unit patch for the "Deadly Black Eagles," the 435th Fighter Training Squadron.

This document does not appear to contain information directly relevant to a procurement opportunity, such as a solicitation, SOW, or amendment. It is likely an organizational emblem or insignia.

Form / Attachment / Pricing Sheet

This document provides technical drawings and specifications for the fabrication of intake and exhaust covers, likely for an aircraft component (T-38). It details dimensions, materials, and assembly instructions.

• Intake Measurements: Provides specific dimensions (A through G) for the right intake, with a note that all measurements are approximate.
• Intake Cover Instructions: Details the use of a plug for the intake (hatched area) and the requirement to remove a "REMOVE BEFORE FLIGHT" streamer attached with a non-marring lanyard. Includes the NSN for the streamer.
• Exhaust Cover List of Materials: Specifies "TOP GUN" marine fabric, elastic cord, stock hooks, and a safety streamer as required materials.
• Exhaust Cover Assembly Notes: Instructs that each cover will have a "REMOVE BEFORE FLIGHT" streamer and requires securing covers with bungee cords and hooks at specific locations.
• Pattern Details: Provides two-part patterns for the exhaust cover, indicating dimensions and fold lines, and noting that two pieces are required.

This document is crucial for bidders who need to manufacture or supply intake and exhaust covers. It provides the exact specifications, materials, and assembly requirements necessary for producing compliant parts. Bidders must carefully review the dimensions, material call-outs, and assembly instructions to ensure accurate fabrication.

Statement of Need (SOW)

To procure the fabrication and delivery of engine intake plugs and exhaust covers for eighty (80) T-38 Talon aircraft assigned to the 435th Flying Training Squadron. These covers are needed to protect aircraft engines from environmental hazards such as foreign object debris (FOD), precipitation, dust, wildlife, and high winds, thereby mitigating FOD risk, preserving engine integrity, and maintaining aircraft readiness. Additionally, new covers are required to display the official 435th FTS insignia for proper unit identification.

• Manufacture and deliver a total of 240 covers: 160 intake plugs (two per aircraft) and 80 exhaust covers (one per aircraft).

• Covers must be specifically designed and fitted for T-38 engine intake and exhaust configurations.

• Material: Durable, weather-resistant, UV-resistant, and moisture-resistant vinyl filled with sculpted urethane foam.

• Color: Black.

• Temperature Resistance: Withstand temperatures up to 300 degrees Fahrenheit.

• Installation: Lightweight and installable/removable by a single maintainer.

• Features: Integrated "Remove Before Flight" streamers (aviation safety visibility standards), securing straps/retention systems for exhaust covers (to prevent dislodgment in high winds).

• Protection: Prevent intrusion of dust, sand, moisture, birds, and other foreign objects.

• Markings/Insignia: Intake plugs to display the official 435th Flying Squadron insignia (Government Furnished Information). Exhaust covers to display "435th FTS" in large white lettering. All covers to include a designated area for identification marking.

• Durability of Markings: Utilize durable, fade-resistant printing or embroidery methods that resist peeling, cracking, or fading under prolonged UV exposure.

• Warranty: Include a two-year replacement warranty.

• Delivery Location: 11090 5th St East Hangar 3, JBSA Randolph TX 78150.

• Delivery Timeline: Within 90 days of contract award (or as negotiated).

• Performance Commencement: Upon contract award.

• Performance Conclusion: Upon delivery and Government acceptance of all required items.

• Quality Assurance: All items must meet applicable aerospace ground support durability standards. The Government will inspect items upon delivery for proper fit, material integrity, and insignia accuracy. Defective or non-conforming items will be replaced at no additional cost.

• Packaging: Items shall be packaged to prevent shipping damage.

• Coordination: Contractor shall coordinate delivery with the Government Point of Contact (POC): Mr. Tim Kilford (timothy.kilford@us.af.mil).

• Government Furnished Information (GFI): Includes official 435th FTS insignia artwork, aircraft marking specifications, and Government POC information.

Form / Attachment / Pricing Sheet

This document is an attachment titled 'Attachment 3 - Base Access Request'. It is a PDF file intended for use by bidders in relation to the SAM.gov opportunity record.

The document's content is not visible in the provided information, but its title suggests it pertains to requesting base access. Bidders would likely need to complete this form to gain entry to a government facility as part of the opportunity's requirements.

Bidders should review this attachment to understand the process and requirements for obtaining base access, which may be necessary for site visits, performance, or other activities related to the opportunity.

Solicitation / RFP / RFQ

This solicitation is for the procurement of Intake Plugs and Exhaust Covers for the T-38 Talon aircraft. The government is seeking to acquire these parts to maintain the T-38 Talon fleet.

• Intake Plugs (Set of 2)

• Exhaust Covers

• Shipping

• The contract type is not explicitly stated, but the document is a "Solicitation/Contract/Order for Commercial Products and Commercial Services."

• Pricing Arrangement: Firm Fixed Price for all items.

• Offer Due Date: April 27, 2026, 12:00 PM Local Time.

• Quotation Submission: Quotes must be submitted via email to lauren.oshaughnessy@us.af.mil and edwin.dela_cruz.3@us.af.mil.

• Evaluation Criteria: Award will be made to the vendor who quotes the lowest price technically acceptable (LPTA) to the Government. Technical acceptability will be determined by an evaluation of the quoted requirements against the solicitation and Statement of Need.

• Site Visit: An optional site visit is scheduled for April 15, 2026, at 9:00 AM CDT at 11090 5th St East, Hangar 3, JBSA Randolph TX, 78150. Interested contractors must submit a base access request form by April 9, 2026.

• Questions Deadline: Questions must be submitted via email by April 16, 2026, 12:00 PM CDT.

• This acquisition is a 100% set-aside for Small Business concerns. Only quotes submitted by small business concerns for NAICS code 336413 with a size standard of 1,250 employees will be accepted.

• The document references a Statement of Need (SON) for detailed requirements.

• Contractors must be registered in the System for Award Management (SAM).

• Product information required includes manufacturer name, part number, illustrations, and literature or description.

• Delivery is FOB Destination and items must be fully assembled and ready for use upon delivery.

Form / Attachment / Pricing Sheet

This document is an image file (JPEG) containing the insignia and markings for the "Deadly Black Eagles" of the 435th Fighter Training Squadron.

The insignia features an eagle with a machine gun, set against a blue background with stars. The text "DEADLY BLACK EAGLES" and "435TH FIGHTER TRAINING SQ" encircles the image.

This attachment likely serves as a visual identifier or branding element related to the unit involved in the opportunity. It does not contain specific requirements, deliverables, or submission instructions relevant to a bid. Bidders should note this is a visual asset and not a functional part of the solicitation's requirements.