Lava Fire Rangeland Fence Reconstruction

Amendment / Modification

This amendment (No. 0001) to solicitation 1240LT26Q0030 serves to document questions and answers received and includes revised attachments.

Specifically, the following attachments have been revised and replaced:

• Attachment 2: Schedule of Items (Lava Fire Fence Project_rev 20260101.xlsx)
• Attachment 3: Statement of Work (rev 20260401)
• Attachment 5: Mapping (Mapping_rev 20260401.pdf)
• Attachment 8: Specs-Drawings (Specs-Drawings-rev 20260401.pdf)

All other documents remain unchanged.

Attachments 2, 3, 5, and 8 have been replaced.

The due date for receipt of quotes remains the same. The Period of Performance is from 08/15/2026 to 10/30/2027.

Statement of Work (SOW) / Performance Work Statement (PWS)

To repair approximately 2.25 miles of segmented interior Forest Service and Forest Service/BLM boundary fences that were destroyed by the Lava Fire in 2024. The fences are critical for proper livestock distribution and allotment utilization.

• Reconstruction: Permanent, four-strand, barbed wire, let-down fence construction.

• Materials: Contractor to supply tools and equipment; government will provide all building materials (t-posts, cedar stays, barbed wire, staples, eye bolts, wooden rails, rock jacks, rock cribs, Baker clips, etc.).

• Specifications: T-posts every 24 feet, 4-foot cedar stays between posts, 4-foot wooden rails at stretch points and gates. Fences must be anchored to surviving trees via welded eyebolts or installed rock cribs/jacks/braces where trees are missing.

• Site Preparation: Removal and disposal of old fences. Clearing of hazard trees and paths for new fencelines (4 feet on each side, trees <10-inch DBH to be cut and removed; larger trees require COR approval).

• Location: Fence segments are within the Lava Fire perimeter on the Indian Mountain C&H Allotment, specifically along FS/BLM boundary fences and interior FS fences. Specific sections include Southern Tip to Smith Gulch, Southern Tip to Mill Creek, King Hill Creek, and Mill Creek Quarter/Quarter.

• Terrain: Varied and moderately rugged terrain with limited road access; off-road use authorized for construction and removal, subject to soil moisture conditions.

• Fences must be straight and wires must be tight to pass inspection.

• No let-down segment longer than 80 yards.

• All fences are considered total rebuilds.

• Workmanship must be skillful.

• Surface conditions must allow proper equipment operation (no snow, frozen ground, or soil exceeding 15% moisture).

• Access roads damaged by the contractor must be restored.

• Off-road vehicle use must not create visible trails or ruts exceeding 4 inches.

• Anticipated Start Date: August 15, 2026

• Anticipated End Date: October 30, 2027

• Contract Time: 180 days

• Work Hours: Directed anytime between 0500-2200 hours, Monday through Sunday, with exceptions possible.

• Place of Performance: Council Ranger District, Payette National Forest, approximately 30 miles from Council, Idaho.

• Contractor Furnished: Labor, supervision, transportation, equipment, incidentals, tools.

• Government Furnished: Fence materials (detailed in Table 1).

• Environmental: Compliance with State and Federal regulations for hazardous materials; pressure washing of equipment before entering National Forest lands; proper disposal of waste.

• Security: Contractor responsible for equipment and property security and damage.

• Supervision: One English-literate supervisor required on-site.

• Work Camps: Adherence to Payette National Forest rules; potential need for Letter of Authorization for camping.

• Fire Control: Compliance with fire laws, provision of fire tools and extinguishers on equipment, spark arresters, proper storage of flammable materials, and adherence to fire plan requirements.

• Reporting: Written progress reports required before completion of each fence segment.

• Site Visit: No site visit required.

• Inspection: Government will inspect work in progress and completed work. Final inspection requires 3 days' notice.

• Acceptance: Based on compliance with contract specifications.

Form / Attachment / Pricing Sheet

This document is an Excel spreadsheet containing a Schedule of Items for the Lava Fire Rangeland Fence Rebuild Project. It includes sections for the Independent Government Estimate (IGE) and the Schedule of Items for a firm-fixed-price contract. Bidders will use this to understand the required items and quantities for pricing their proposals.

• Instructions Tab: Provides guidance on how to complete an Independent Government Estimate (IGE), emphasizing that it must be an independent estimate and not a contractor quote. It also explains the purpose of the IGE in determining procurement value and evaluating offers.
• Contract (No Options) Tab: A template for a Schedule of Items, including fields for Project Title, Workplan Acquisition Plan/Requisition No., Period of Performance or Anticipated Delivery Date, Item Number, Description, Pay Unit, and Estimated Quantity. It notes that the award is anticipated to be a firm-fixed-price contract.
• Contract (With Option Yrs) Tab: Contains specific details for the Lava Fire Rangeland Fence Rebuild Project, including the Period of Performance (Priority A: 8/15/2026 – 10/30/2027). It lists Item 0001 for "Fence Removal/Reconstruction of permanent, 4-wire, let down, livestock fence" with a quantity of 2.25 Miles. Fields for Unit Price and Total Price are included but not populated.

This attachment provides the specific details of the work required, including the description and quantity of fencing to be removed and reconstructed. Bidders should use this information to prepare their pricing and understand the scope of the project for their proposal submission.

Form / Attachment / Pricing Sheet

This document is a map illustrating the proposed fencing project for the Lava Fire Fence Reconstruction in the Payette National Forest. It serves as a visual aid to understand the geographical scope and location of the reconstruction effort.

• Proposed Fencing Project: Depicted by a red line with 'x' markers, indicating the path of the new or reconstructed fence.
• Land Management Agencies: Delineates areas managed by Private, State of Idaho, USFS (U.S. Forest Service), and BLM (Bureau of Land Management).
• Geographical Features: Includes trails, lakes, creeks, and named mountains with elevations.
• Boundaries: Shows Forest Service (FS) and Bureau of Land Management (BLM) boundaries.
• Scale and Legend: Provides a map scale in miles and a legend explaining the map symbols.

This map is crucial for bidders to understand the physical location and extent of the fencing project. It helps in visualizing the terrain, adjacent land management areas, and potential access points, which are essential for planning and estimating the resources required for the reconstruction effort.

Form / Attachment / Pricing Sheet

This document contains detailed illustrations and specifications for various types of fence construction, specifically "Let-Down Fence" typicals. It serves as a visual guide for bidders to understand the physical requirements and construction methods for fencing components.

• Illustration 1: Depicts a four-wire permanent "Let-Down Fence" using T-posts and wooden cedar stays, showing wire gauge, spacing, and post types.
• Illustration 2: Provides a detailed view of fence construction, including T-posts, wooden cedar stays, let-down fence clips, and a metal double H-brace. It also shows attachment methods for wire to posts and braces.
• Illustration 3: Illustrates different brace types for the four-wire permanent "Let-Down Fence," including a "Tie Tree Brace" and a "Rock Jack Brace," detailing wire wrapping and securing methods.
• Illustration 4: Focuses on the "Double H-Brace Corner" construction, specifying dimensions, steel pipe usage, and brace clamp details.
• Illustration 5: Shows a "Gate and Gate Brace" assembly, illustrating metal single H-braces and the connection of the fenceline to the brace by bales.

This attachment is crucial for bidders to accurately estimate material, labor, and complexity for any fencing requirements within the opportunity. It defines the specific construction standards and components that must be used, directly impacting proposal preparation and the technical approach.

Form / Attachment / Pricing Sheet

This document contains drawings and specifications for "Let-Down Fence" and "Gate and Gate Brace" components, likely intended as part of a larger construction or maintenance project.

• Let-Down Fence (Typical No. 1): Details the construction of a let-down fence, including specific components like "LET-DOWN FENCE CLIPS" and "DUPLEX NAIL." It shows how to attach fence clips to posts and install duplex nails. The drawing is dated August 2007 and is Sheet 5 of 23.
• Exhibit A: A hand-drawn illustration showing how to attach a fence to a "Live Healthy Tree" using an "Eye Bolt" and "4" stretch post." It specifies a minimum tree diameter of 12" DBH and provides various measurements for the fence components.
• Gate and Gate Brace (Drawing #1): A sketch illustrating a gate and its brace, including a "Toggle Stick" for closing the gate, an "Insulated Wire," and a "ground wire."

These drawings provide specific technical details and construction methods for fencing and gate components. Bidders will need to refer to these specifications to understand the exact materials, assembly, and installation requirements for these elements of the overall opportunity. They are crucial for accurate bidding and project execution.

Form / Attachment / Pricing Sheet

This document is a Vicinity Map for the Payette National Forest, specifically related to the Lava Fire Rangeland Infrastructure Rehab CE (CE for Categorical Exclusion). It provides a geographical overview of the project area, showing land management boundaries, key landmarks, and proposed project locations.

• Geographic Area: Payette National Forest, focusing on areas around Indian Mountain and Mill Creek.
• Land Management Agencies: Delineates areas managed by BLM, Private entities, State, and Forest Service.
• Features: Includes roads (closed, open, seasonal), streams, summits, landmarks, and allotment pastures.
• Proposed Project: Highlights the "Proposed Fence Project" area.

This map is crucial for bidders to understand the physical location and context of the proposed rangeland infrastructure rehabilitation. It helps in visualizing the scope of work, potential access routes, and the surrounding environment, which is essential for accurate bidding and project planning.

Statement of Work (SOW) / Performance Work Statement (PWS)

This Statement of Work outlines the requirements for the Lava Fire Rangeland Fence Rebuild Project, which involves the removal and reconstruction of approximately 3.5 miles of segmented interior Forest Service and BLM boundary fences on the Payette National Forest. The project is a response to damage caused by the 2024 Lava Fire.

• Removal of all old fence material and clearing of vegetation and large woody debris.

• Reconstruction of approximately 3.5 miles of fence in seven distinct segments.

• Construction will consist of permanent, four-strand, barbed wire, let-down, livestock fence.

• Fence construction will not be contiguous.

• Workmanship must be skillful.

• Surface Conditions: Work shall not occur under snow, frozen ground, or when soil moisture exceeds 15%.

• Surface Disturbance: Damaged access roads must be restored to their original condition at the contractor's expense.

• Hazardous Materials: Compliance with all State and Federal regulations is required. On-site disposal of hazardous materials is not authorized.

• Equipment Cleaning: All construction equipment must be pressure washed before entering National Forest System lands to prevent the transport of noxious weeds.

• Contract Start Date: Anticipated August 15, 2026

• Contract Time: 180 days

• Construction Completion Date: October 30, 2027

• Project Location: Council Ranger District, Payette National Forest, with specific segments detailed in the document.

• Contractor must provide all labor, supervision, transportation, equipment, incidentals, and tools.

• Government will provide specific fence materials (listed in Table 1).

• Contractor must obtain a Letter of Authorization for camping from the District Ranger if applicable.

• A fire prevention and suppression plan is required, especially during closed fire season.

• Contractor employees must report all wildfires.

• Work hours are generally between 0500-2200 hours, Monday-Sunday, with potential exceptions.

• A work plan and schedule must be prepared and submitted.

• Contractor is responsible for all travel expenses.

• Contractor must provide contact information for key personnel and subcontractors.

• No site visit is required.

• Government will conduct inspections during and after work completion.

• Acceptance is based on compliance with contract specifications.

Form / Attachment / Pricing Sheet

This document is an Excel spreadsheet containing a Schedule of Items and instructions for preparing an Independent Government Estimate (IGE). It is intended to guide bidders on the format and level of detail required for pricing, and for the government to establish procurement value and evaluate price reasonableness.

• Instructions Tab: Provides guidance on creating an IGE, emphasizing it must be independent and not a contractor quote. It also explains the purpose of different tabs (Stand Alone IGE, IGE w/options, IDIQ, Task Order).
• CONTRACT (NO OPTIONS) Tab: A template for a Schedule of Items, requiring bidders to fill in details for items, descriptions, pay units, estimated quantities, and unit prices. It notes that the award is anticipated to be a firm-fixed-price contract.
• CONTRACT (WITH OPTION YRS) Tab: A more detailed Schedule of Items template for the "Lava Fire Rangeland Fence Rebuild Project," specifying item number, description (Fence Removal/Reconstruction of permanent, 4-wire, let down, livestock fence), unit of measure (Miles), quantity (3.5), and fields for Unit Price and Total.

This attachment is crucial for bidders to understand the specific items and quantities the government is procuring for the Lava Fire Rangeland Fence Rebuild Project. Bidders must use this format to provide their pricing, including unit prices and total costs, for the fence removal and reconstruction work. The "CONTRACT (NO OPTIONS)" tab provides a general template, while the "CONTRACT (WITH OPTION YRS)" tab offers specific details for this project, including the quantity of 3.5 miles of fence to be addressed.

Solicitation / RFP / RFQ

This is a Request for Quotation (RFQ) for the Lava Fire Rangeland Fence Reconstruction project on the Payette National Forest, Council Ranger District, approximately 30 miles from Council, Idaho. The project involves the removal and reconstruction of approximately 3.5 miles of segmented interior Forest Service and Forest Service/BLM boundary fences destroyed by the Lava Fire. The purpose is to ensure proper distribution of permitted livestock and appropriate utilization of the allotment by cattle.

• Reconstruction of approximately 3.5 miles of fence, consisting of permanent, four-strand, barbed wire, let-down livestock fence.

• The fence construction will be in seven distinct segments.

• Specific fence locations include:

  • Mill Creek Summit PNF/BNF Boundary Fence
  • Southern Tip to Smith Gulch FS/BLM Boundary Fence
  • Mill Creek FS/BLM Boundary Fence
  • Dobie FS/BLM Boundary Fence
  • Mill Creek Quarter/Quarter FS/BLM Boundary Fence
  • Mill Creek Summit Fence Lava Fire Addition Fence

• A site visit is not being held for this requirement.

• Period of Performance: August 15, 2026, to October 30, 2027.

• Contract type is not explicitly stated, but it is a "Request for Quotation."

• Quotations are due by close of business on April 16, 2026, at 1700 MT.

• Questions are due by close of business on March 23, 2026, at 1700 MT.

• Required submission documents include:

  • Signed SF18
  • Schedule of Items
  • Past Performance and Experience Forms
  • Acknowledgment of Amendments (if applicable)

• This is a 100% small business set-aside.

• North American Industry Classification (NAICS) code: 238990 (All Other Specialty Trade Contractors) with a size standard of $19.0 M.

• Performance and Payment Bonds are required at 100% of the original contract price if the value exceeds $150,000, due 10 days after award.

• For contracts exceeding $35,000 but not exceeding $150,000, only payment protections are required, with an irrevocable letter of credit or payment bond allowed per FAR 52.228-13, due within 10 days of contract award.

• The document is Standard Form 18 (REV. 6-95).

• The issuing office is USDA-FS CSA Intermountain Region 8.

• Contact information for Terri Tucker (Contract Specialist) and Ben Drier (COR) is provided.

Solicitation / RFP / RFQ

This document is a combined synopsis/solicitation (RFQ) for the Lava Fire Rangeland Fence Reconstruction project on the Payette National Forest. It constitutes the only solicitation, and no separate written solicitation will be issued. The acquisition is a Total Small Business Set-Aside.

• Repairing fence segments damaged by the Lava Fire on Indian Mountain, within Forest Service and BLM lands.

• Anticipated Award Type: Firm-fixed price purchase order.

• Contract Number: 1240LT26Q0030

• Evaluation Criteria: Lowest Price Technically Acceptable (LPTA).

• Price will be evaluated for fairness and reasonableness through comparison with other quotes and the Independent Government Cost Estimate.

• Technical Acceptability will be rated as "acceptable" or "unacceptable" based on the offeror's ability to provide a sound, compliant, and detailed explanation of their understanding of the requirements.

• Past Performance will be evaluated as Acceptable, Neutral, or Unacceptable.

• Offerors must submit pricing for all items to be considered responsive.

• Offerors must complete the Experience Questionnaire and Past Performance Sheet.

• Period for acceptance of offers: 90 calendar days from the date specified for receipt of offers.

• Questions due: March 23rd, 1700 MT.

• Total Small Business Set-Aside.

• Applicable NAICS Code: 238990.

• Small Business Size Standard: $19.0M.

• This solicitation incorporates provisions and clauses by reference, accessible at www.acquisition.gov.

• Numerous FAR clauses are incorporated, including those related to commercial construction, Buy American Act, payment protections, performance and payment bonds, and DEI compliance.

• Several attachments are included, such as Schedule of Items, Description-Location of Work, Statement of Work, Mapping, and Specs-Drawings.

Form / Attachment / Pricing Sheet

This document is a General Decision (GD) for wage rates applicable to heavy construction projects in Adams County, Idaho. It serves as a reference for prevailing wages that must be paid on federal or federally funded construction projects.

• General Decision Number: ID20260036
• State: Idaho
• County: Adams County
• Construction Type: Heavy (including water/sewer lines, treatment plants, industrial plants, etc.)
• Publication Date: 01/02/2026
• Classifications and Rates: Lists specific job classifications (e.g., Electrician, Power Equipment Operator, Ironworker, Laborer, Truck Driver, Carpenter, Cement Mason) with their corresponding hourly wage rates and fringe benefits.
• Zone Pay: Details additional daily pay based on project distance from specified U.S. Post Offices.
• Boom Pay: Specifies additional pay for cranes and concrete pump boom trucks based on boom length.
• Executive Orders: Notes applicability of Executive Order 13706 (Paid Sick Leave) and Executive Order 13658 (Minimum Wage) for federal contractors.

Bidders must use these prevailing wage rates when preparing their proposals for relevant construction opportunities. Failure to comply with these wage requirements can lead to penalties. The document helps bidders accurately estimate labor costs and ensure compliance with federal labor standards.

Form / Attachment / Pricing Sheet

This document is a "Past Performance Data Sheet" intended for bidders to provide detailed information about their experience on previous projects. It is designed to help the government evaluate a bidder's past performance.

• Project Name: Name of the project being described.
• Name of Contracting Activity: The government agency or entity that awarded the contract.
• Contract Number: The official number assigned to the contract.
• Contract Type: The type of contract (e.g., fixed price, cost-plus).
• Total Contract Value: The total monetary value of the contract.
• Completion Date or Anticipated Completion Date: The date the project was completed or is expected to be completed.
• Contracting Officer: Contact information (name, phone, email) for the government's Contracting Officer.
• Project Manager or COR: Contact information (name, phone, email) for the government's Project Manager or Contracting Officer's Representative.
• Project Description: A detailed explanation of the project, including the skills, abilities, and processes used, and its relevance to the current opportunity.

Bidders must complete this form for each relevant project to demonstrate their past performance. The detailed project descriptions will be used by the government to assess the bidder's capabilities and experience in relation to the requirements of the opportunity.

Form / Attachment / Pricing Sheet

This document is an Experience Questionnaire designed to gather information from potential offerors regarding their qualifications and past performance relevant to a solicitation. It helps the government assess a contractor's capability to perform the work.

• Contractor Information: Name, address, telephone number, business type, and years of experience in the relevant field.
• Past Projects: Details of projects completed within the last three years, including contract amount, type of project, date completed, and contact information for references.
• Current Commitments: Information on concurrent contractual commitments.
• Past Performance: Questions regarding failure to complete work, use of performance bonds, and site visits.
• Resources: Information on available employees, equipment, and estimated progress rates.
• Key Personnel Experience: Details on the experience of principal individuals who will be involved in the contract.
• Narrative Plan: A section for offerors to provide a narrative on how they plan to successfully complete the project.
• Biobased Products: Requirements to identify biobased products to be purchased and used, including manufacturer, cost, intended use, and percentage of biobased content. Experience with specifying, purchasing, using, and installing biobased products must also be documented.
• Certification: A statement certifying the accuracy of the provided information.

Bidders must complete this questionnaire thoroughly and accurately. The information provided will be used to evaluate their experience and capability to perform the work described in the solicitation. Special attention should be paid to the sections on past projects, key personnel, and the new requirements regarding biobased products, as these will be critical in assessing the offeror's suitability.