Relocation Services_Power Distribution Unit (PDU)

Questions & Answers / Clarifications

This document provides clarification and answers to vendor questions regarding Task 4 of the solicitation, specifically concerning "Reinstallation and Power Connectivity" for wiring between Room 128A and Room 134.

• Wiring Feed: The new wiring will originate from the junction box in RM 134, connect there, and then be pulled into RM 128A, terminating at PDU 8. The wiring must be phased correctly.
• Wire Length and Size: The required raceway length is 160 ft. The wire size is 3/0.
• Bill of Materials (BOM): The document includes a Bill of Materials for the required wiring and connectors:
  • 160 ft of 3/0 THHN CU STRD BROWN WIRE
  • 160 ft of 3/0 THHN CU STRD ORANGE WIRE
  • 160 ft of 3/0 THHN CU STRD YELLOW WIRE
  • 6ea 250 MCM IN-LINE SPLICE BUR
  • 6ea 250 BURNDY UNI-TAP TERM. CONN.
• PDU 8 Task: The only task related to PDU 8 is labeling. Vendors are instructed to ensure label information is correct and to observe labels at both ends in the electrical room.

This Q&A document clarifies specific technical details and material requirements for Task 4, which may impact how bidders prepare their proposals and source materials.

Solicitation / RFP / RFQ

This solicitation is for the relocation of a critical power asset, specifically Power Distribution Unit (PDU) 9, within Building 10271 at Wright-Patterson Air Force Base. The 88th Communications Squadron requires these services.

• Decommission and prepare the existing PDU 28 and its stand, moving it to a designated storage cage.

• Disconnect existing power tails from PDU 28, leaving them in place.

• Relocate the Liebert PDU 9 and its associated stand from its origin in Room 134 to the new location in Room 128A.

• Restore the subfloor and flooring system at both the original and new locations, including necessary subfloor infrastructure.

• Reinstall and connect power tails to the newly installed PDU 9, ensuring correct phasing and full power connectivity.

• Label PDU 8 and PDU 9 with specific "red" and "blue" labels to identify their power sources.

• Provide documentation mapping power tail locations to breaker locations.

• Contract Type: Firm Fixed Price

• Period of Performance: May 27, 2026 to August 18, 2026

• Estimated Value: NAICS code 238210 with a size standard of $19,000,000.00.

• Offer Due Date: May 11, 2026, 10:00 AM Local Time.

• Evaluation Factors: Technical Evaluation (Acceptable/Unacceptable) and Price (lowest valuated price for acceptable offers).

• Technical evaluation requires a complete description of the supply or service, including specification sheets or capability statements.

• Price determination will be based on market research and independent government estimates.

• This acquisition is set aside 100% for Small Business.

• The solicitation incorporates FAR clauses 52.212-1, 52.212-3, and 52.212-4 by reference. FAR 52.212-5 is attached.

• Payment requests and receiving reports are to be submitted electronically via Wide Area WorkFlow (WAWF).

• Attachments include a PDU Performance Work Statement and a Wage Determination.

Solicitation / RFP / RFQ

This is a combined synopsis/solicitation for commercial products or services for the relocation of a Power Distribution Unit (PDU) at Wright Patterson AFB, Ohio. This announcement serves as the only solicitation, and a separate written solicitation will not be issued.

• The primary requirement is for one-time relocation services for a PDU.

• Services are to be performed at Wright Patterson AFB, Ohio.

• The Period of Performance (PoP) is from 27 May 2026 to 15 August 2026.

• Quotes are due by 11 May 2026 at 10:00 AM EST.

• Quotes must be submitted electronically to Raschelle M. Swindle (raschelle.swindle@us.af.mil) and Curtis V. Thomas III (curtis.thomas.4@us.af.mil).

• The entire quotation, including attachments, must not exceed 5 megabytes and should be in a single email.

• Acceptable file formats for attachments include .pdf, .doc, .docx, .xls, or .xlsx. Compressed files (.zip) and executable files (.exe) are not permitted.

• Quotes must include the aggregate total of base plus all option year CLINs.

• Vendors must complete and return the 'Required Information Sheet'.

• Quotations with pricing only, lacking service/supply details, will not be accepted.

• The Government reserves the right to conduct interchanges with offerors, make no award, or cancel the solicitation.

• The Government reserves the right to determine if proposed prices are fair and reasonable.

• Quotes must hold prices firm for 60 calendar days from the specified receipt date.

• This acquisition is set-aside for small business concerns.

• The North American Industry Classification System (NAICS) code is 238210.

• The small business size standard is $19M.

• Offerors must be registered in the System for Award Management (SAM) database.

• Offerors must demonstrate full compliance with CMMC Level 1 requirements by self-certifying and recording results in the SPRS module within PIEE.

• Applicable provisions and clauses are detailed in a separate solicitation attachment.

• Offerors must ensure their SAM registration is current, complete, and accurate.

• Customs duties are prohibited on eligible items; the Government will assist in obtaining duty-free entry.

• Attachments to the solicitation include: Solicitation, Performance Work Statement, and Wage Determination.

Form / Attachment / Pricing Sheet

This document is a Register of Wage Determinations under the Service Contract Act, issued by the U.S. Department of Labor. It provides the minimum wage rates and fringe benefits required for various occupations when performing contract work in specific geographic areas. This specific determination (No. 2015-4731, Revision No. 28) applies to the Ohio Counties of Greene, Miami, and Montgomery.

• Lists numerous occupational codes and titles.
• Specifies the minimum hourly wage rate for each occupation.
• Indicates that "Fringe Benefits Required Follow the Occupational Listing."
• Includes notes on Executive Orders (EO) 13706 and 13658 regarding paid sick leave and minimum wage adjustments.
• Details general benefits such as vacation, holidays, and health & welfare contributions.
• Outlines the process for requesting additional classifications and wage rates (conformance process).

This document is crucial for bidders to understand the minimum labor costs associated with performing services under a contract in the specified area. It directly impacts proposal pricing by establishing the baseline wages and benefits that must be paid to employees. Bidders must ensure their proposed wages and benefits meet or exceed these minimums to comply with the Service Contract Act.

Statement of Work (SOW) / Performance Work Statement (PWS)

This Performance Work Statement (PWS) outlines the requirements for the relocation of a critical power asset, Power Distribution Unit (PDU) 9, within Building 10271 at Wright-Patterson Air Force Base. The objective is to move PDU 9 from its current location in Room 134 to a new designated location in Room 128A to support evolving data center requirements.

• The certified electrical contractor will provide project management, labor, tools, equipment, and materials (unless government-furnished) for the relocation.

• Work includes decommissioning, moving, reinstalling, and ensuring full operational status of PDU 9.

• Associated subfloor and electrical modifications are included.

• Task 1: Decommission and Prepare Site: Decommission and remove existing PDU 28 and its stand from Room 128A to storage in Room 145. Disconnect power tails from PDU 28.

• Task 2: Relocate PDU 9 and Associated Stand: Move PDU 9 from Room 134 to Room 128A. Remove and reinstall its equipment stand.

• Task 3: Subfloor and Flooring System Restoration: Ensure raised-floor systems are sound and functional at both original and new locations. Modify floor tiles to close openings.

• Task 4: Reinstallation and Power Connectivity: Install new wiring between Room 128A and Room 134. Reconnect power tails to PDU 9.

• Task 5: Labeling and Documentation: Provide documentation mapping power tail locations to breaker locations. Label PDU 8 and PDU 9 with "red" and "blue" labels indicating power sources.

• Certificate of Compliance for Electrical Work: Workers and work must meet relevant safety standards and codes.

• Safe Equipment Relocation: All equipment relocated without damage; zero safety incidents.

• Structural Integrity of Floor: Raised subfloor must be structurally sound, level, and secure at both locations.

• Full Operational Capability: PDU 9 must be fully operational, correctly phased, and provide power upon completion.

• Accurate Labeling & Documentation: All specified equipment labeled correctly, and documentation is accurate and complete.

• Period of Performance: 15 May 2026 – 15 August 2026.

• Place of Performance: Building 10271, Wright-Patterson Air Force Base.

• Access to the work site.

• Required floor tiles.

• Relevant facility drawings.

• A fully relocated and operational PDU 9.

• Documentation of power tail and breaker locations.

• Any unused materials left on-site.