B755 EIFS & Door Repair

Statement of Work (SOW) / Performance Work Statement (PWS)

This Statement of Work outlines the requirements for the "Sustain Doors and EIFS, B755" project at the Minneapolis Air Reserve Station, aimed at repairing and improving the Base Exchange facility.

• Repair Exterior Insulation and Finish System (EIFS), including cracks, holes, voids, joints, and applying a new finish coat.

• Replace main entrance door operators, sensors, and controls; perform brick infill for one double door; and replace a single door, frame, and hardware.

• Relocate an existing sign and exterior conduit, and mount a new sign.

• Reroute tank level alarm conduit to the interior of the facility.

• General construction debris removal and site restoration.

• The Period of Performance shall not exceed 120 calendar days from the Notice to Proceed (NTP).

• Work will be performed at the Minneapolis Air Reserve Station.

• Contractor must provide all supervision, labor, materials, and equipment.

• Adherence to all contract documents, including drawings (Attachment 1) and specifications (Attachment 2).

• Compliance with applicable codes, regulations, and standards (e.g., FAR, OSHA, NFPA).

• Site/Utility Verification required prior to proposal.

• Protection of non-work areas and equipment.

• Identification of employees and base access procedures.

• Provision of job site tools and equipment, and adherence to construction attire standards.

• Notification requirements for work, traffic plans, and critical issues.

• Environmental protection measures, including hazardous waste management.

• Pre-Construction (Pre-CON) meeting attendance and participation.

• Submission of progress schedules and reports (AF Form 3064, AF Form 3065).

• Material approval process (AF Form 3000).

• Quality Control plan implementation.

• Pre-final and final inspections, and warranty documentation delivery.

• Closeout documents submission, with 5% of contract value withheld until acceptance.

Form / Attachment / Pricing Sheet

This document, "Attachment 2 B755 Specifications.pdf", appears to be a technical specification document related to an opportunity. It details various specifications for construction materials and systems, including:

• Section 01 11 00 - Summary of Work: Outlines the overall scope of work, including repairs to store front door operators, EIFS repairs/refinishing, door replacement, and exterior lighting repairs at the Air Force Reserve Station in Minneapolis, MN. It also covers submittals and general requirements.

• Section 01 14 00 - Work Restrictions: Details regulations concerning working hours, access to premises, and safety requirements.

• Section 01 32 16.00 - Small Project Construction Progress Schedules: Specifies requirements for submitting and updating construction schedules.

• Section 01 33 00 - Submittal Procedures: Outlines the process and types of submittals required, including preconstruction submittals, product data, and samples.

• Section 01 42 00 - Sources for Reference Publications: Lists organizations and their contact information for referenced standards and publications.

• Section 02 41 00 - Demolition and Deconstruction: Covers requirements for demolition and deconstruction activities, including safety, disposal of materials, and protection of existing structures.

• Section 04 20 00 - Unit Masonry: Specifies requirements for unit masonry, including materials, delivery, storage, handling, and installation.

• Section 07 24 00 - Exterior Insulation and Finish Systems (EIFS): Details specifications for EIFS repairs, including system description, materials, installation, and quality control.

• Section 08 11 13 - Steel Doors and Frames: Outlines requirements for insulated steel doors and frames, including fabrication, installation, and finishes.

• Scope of Work: Repair and replacement of store front doors, EIFS, exterior lighting, and related incidental work.

• Location: Air Force Reserve Station, Minneapolis, MN.

• Submittal Requirements: Detailed procedures for various submittals (preconstruction, product data, samples, etc.) are outlined.

• Technical Specifications: Extensive details are provided for various construction elements, including masonry, EIFS, and steel doors/frames.

This document is crucial for bidders as it defines the technical requirements, scope of work, and specifications for the materials and methods to be used in the project. Potential bidders must review these specifications to understand the project's technical demands, assess their capabilities, and prepare an accurate proposal. It details the specific standards, materials, and installation procedures that must be followed.

Form / Attachment / Pricing Sheet

This document is a Submittal Register (Attachment 4) for the "SUSTAIN STORE FRONT DOORS & EIFS, B755" project. It serves as a log for required submittals from the contractor, detailing the specifications, descriptions, and submission schedules.

• Submittal Items: Lists various items requiring contractor submittal, including:
  • Preconstruction Submittals (List of Contact Personnel, Baseline Construction Schedule, Submittal Register)
  • Product Data (Clay or Shale Brick, Mortar Mix, Base Coat, Reinforcing Fabric, Finish Coat, Joint Sealant, Sealant Primer, Bond Breaker, Backer Rod, Doors, Frames)
  • Samples (Clay or Shale Brick, Sample Boards)
  • Certificates (Qualification of EIFS Installer)
  • Manufacturer’s Instructions
  • Warranty
• Specification Sections: References relevant specification sections (e.g., 01 32 16.00 20, 2000-01-14, 2000-04-20, 2000-07-24, 2013-08-11).
• Submission Schedule: Includes columns for submission dates, approval needed by dates, and material needed by dates.
• Contractor Action: Tracks contractor actions and dates of action.
• Approving Authority: Indicates the approving authority and dates related to their actions.

This register is crucial for bidders to understand the specific documentation, product data, and samples they will be required to submit as part of the contract. It outlines the timeline and approval process for these submittals, impacting project planning and execution. Bidders should review this list to ensure they can meet all submittal requirements within the specified timeframes.

Form / Attachment / Pricing Sheet

This document contains the final design drawings and details for the "Sustain Store Front Doors & EIFS, B755" project at the 934th Airlift Wing, United States Air Force Reserve. It provides technical specifications and visual representations for the construction work.

• Title Sheet (T001): Project identification, location, and a list of included sheets.
• Existing Photos (G001): Visual documentation of the current state of Building 755, highlighting areas needing repair or replacement.
• Demo Floor Plan & General Scope (AD101): Outlines demolition tasks, general scope of work, and important notes regarding site access, working hours, and safety during construction.
• Elevations (AD201): Depicts the exterior elevations of Building 755, detailing proposed changes to EIFS, doors, and lighting.
• Schedules (A601): Includes a lighting schedule and a detailed door schedule specifying types, hardware, and finishes.
• Details (A602): Provides specific construction details for EIFS assemblies, door heads, jambs, sills, and wall pack cover plates.

This document is crucial for bidders to understand the full scope of work, including demolition, repair, and replacement of store front doors, EIFS (Exterior Insulation and Finish System), and exterior lighting. It details specific materials, construction methods, and site constraints that will impact bidding and project execution.

Solicitation / RFP / RFQ

This document is a solicitation for the "Repair Doors and EIFS, B755" project located at 760 Military Hwy, Building 755, Minneapolis, Minnesota. The contractor will be responsible for providing all necessary supervision, labor, materials, and equipment to meet the requirements outlined in the Statement of Work, Construction Specifications, and Drawings.

• Repair Exterior Insulation and Finish System (EIFS): Repair cracks, holes, voids, joints, and apply new finish coat.

• Repair Doors: Includes replacement of main entrance door operators, sensors, and controls; brick infill of one double door; and replacement of a single door, frame, hardware, and accessories.

• Relocate Sign: Remove sign and exterior conduit, then mount new sign in a designated location.

• Tank Level Alarm Conduit: Remove exterior conduit and reroute new conduit on the interior of the facility.

• Contract Type: Firm Fixed Price

• Period of Performance: Begin within 10 calendar days of award, complete within 120 calendar days of notice to proceed.

• Estimated Value: USD 157,900.00

• Offers are due by 03:00 PM local time on April 30, 2026.

• Offers will be publicly opened at that time if it is a sealed bid solicitation.

• Envelopes must be marked with offeror's name and address, solicitation number, and due date/time.

• Offers providing less than 10 calendar days for Government acceptance will be rejected.

• NAICS Code: 236220

• Size Standard: USD 45,000,000.00 Annual receipts

• Small Business Type: Small Business

• Set Aside Percent: 100%

• The contract begins performance within 10 calendar days and completes within 120 calendar days after award/notice to proceed.

• Performance and Payment Bonds are required.

• The solicitation references multiple attachments including Specifications, Drawings, Submittal Register, Wage Determination, and Statement of Work.

Form / Attachment / Pricing Sheet

This document, titled "Construction Execution Plan – Detailed Cost Breakdown & Qualifications," outlines QLC Solutions Inc.'s proposed approach, cost breakdown, and qualifications for a construction project. It serves as a detailed bid or proposal component.

• Scope Overview: QLC Solutions Inc. will act as Prime Contractor for exterior façade modifications, masonry work, electrical integration, and automated door system installation, including multi-trade coordination and compliance with prevailing wage and safety requirements.
• Detailed Cost Breakdown:
  • EIFS Work: $72,238 (approx. 4,600 SF, 3-5 workers, estimated wage $95-$115/hour).
  • Brick / Masonry: $9,946 (2 workers, union rates provided).
  • Electrical: $23,000 (wall packs, conduit, lighting, sign relocation, 2 licensed electricians, approx. 35 hours).
  • Automated Door Systems: $27,025 (Stanley Magic Force operators, sensors, controls, commissioning, 1-2 installers, estimated labor 26 hours + 10 hours travel).
• Construction Subtotal: $132,210
• QLC Prime Contractor Services: $25,690 (approx. 16%, includes project management, scheduling, safety, insurance, etc.).
• Total Project Cost: $157,900
• Capabilities Statement: QLC specializes in multi-trade coordination, equipment integration, and public sector compliance.
• Relevant Project Experience: Lists key personnel's project management experience on large commercial/institutional projects, with specific project values and roles.

This document provides a detailed cost estimate and scope of work for a construction project. Bidders can use this to understand the expected costs, the specific trades involved, the prime contractor's proposed approach, and their qualifications. It is likely a component of a larger solicitation response.

Form / Attachment / Pricing Sheet

This document is a "General Decision Number" which serves as a wage determination for building construction projects in Hennepin County, Minnesota. It specifies the prevailing wage rates and fringe benefits for various labor classifications.

• General Decision Number: MN20260053, effective 01/02/2026.
• Superseded Number: MN20250053.
• State: Minnesota.
• Construction Type: Building.
• County: Hennepin County.
• Project Type: Building Construction Projects (excluding single-family homes or apartments up to and including 4 stories).
• Labor Classifications: Lists specific job titles (e.g., Carpenter, Electrician, Plumber) with their corresponding hourly wage rates and fringe benefits.
• Identifiers: Explains various identifiers (Union Rate, Union Average Rate, Survey Rate, State Adopted Rate) used to denote how the wage rates were determined.
• Appeals Process: Outlines the procedure for appealing wage determinations.

Bidders must use this wage determination to ensure compliance with federal labor laws for any contract awarded under this solicitation. It dictates the minimum wages and benefits that must be paid to laborers and mechanics employed on the construction project. Failure to comply can result in penalties. Bidders should review the listed classifications and rates to understand their labor cost implications for proposals.

Amendment / Modification

• The offer due date has been extended.

• Section A - Solicitation/Contract Form

• The deadline for submitting offers has been extended from April 15, 2026, to April 30, 2026, at 3:00 PM (CST).

Solicitation / RFP / RFQ

This solicitation is for the "Repair Doors and EIFS, B755" project located at 760 Military Hwy, Building 755, Minneapolis, Minnesota. The contractor will be responsible for providing all supervision, labor, materials, and equipment necessary to complete the work as described in the Statement of Work, Construction Specifications, and Construction Drawings.

• Repair Exterior Insulation and Finish System (EIFS): Address cracks, holes, voids, joints, and apply new finish coat.

• Repair Doors: Includes replacement of main entrance door operators, sensors, and controls; removal and brick infill of one double door; and replacement of a single door, frame, hardware, and accessories.

• Relocate Sign: Remove existing sign and exterior conduit, then mount a new sign in a designated location.

• Tank Level Alarm Conduit: Remove exterior conduit and reroute new conduit on the interior of the facility.

• Contract Type: Firm Fixed Price

• Period of Performance: Within 10 calendar days after award, with completion within 120 calendar days.

• Offer Due Date: April 30, 2026, by 3:00 PM local time.

• Site Visit: Scheduled for Thursday, April 2, 2026, at 10:00 AM CST. Participants must meet at Building 860, 2nd Floor Contracting Conference Room 229. Prior clearance via an Entry Access List (EAL) is required.

• Submission Method: Email only to Caleb Anderson (caleb.anderson.15@us.af.mil) with a copy to Karen Gillen (karen.gillen@us.af.mil). Electronic submissions are preferred.

• Evaluation: Quotes will be evaluated on a price-related factor basis. Award will be made to the lowest-priced responsible offeror whose quote is responsive and deemed best value.

• This procurement is a 100% Small Business Set-Aside.

• Size Standard: $45,000,000.00 in average annual revenue under NAICS 236220.

• Amendments 0001, 0002, and 0003 have been issued.

• The solicitation includes various FAR and DFARS clauses related to insurance, bonds, payment, invoicing (WAWF), and contract administration.

Amendment / Modification

• The offer due date for solicitation FA663326Q0001 has been extended.

• The new offer due date is April 22, 2026.

• The previous offer due date was April 15, 2026.

• Offer Due Date

• Bidders are granted an extension to submit their offers. All other terms and conditions of the original solicitation remain unchanged.

Form / Attachment / Pricing Sheet

This document is a Submittal Register for the "SUSTAIN STORE FRONT DOORS & EIFS, B755" project. It serves as a log to track required submittals from the contractor, including specifications, product data, samples, and certifications.

• Activity No. / Transmittal No.: Unique identifiers for each submittal.
• Spec Section: The relevant specification section for the item.
• Description Item Submitted: The specific item or document being submitted (e.g., Baseline Construction Schedule, Clay or Shale Brick, Doors).
• Submittal Type: Indicates categories like Preconstruction Submittals, Product Data, Samples, Certificates, Manufacturer's Instructions.
• Contractor Action / Approving Authority: Columns for tracking the status and approval process.
• Schedule Dates: Dates related to submission, approval needs, and material needs.

This register outlines the types of materials, data, and documentation that must be submitted by the contractor for approval throughout the project lifecycle. Bidders can use this to understand the scope of required submittals, the timing of these submissions, and the types of products and information that will be evaluated for compliance with project specifications. It details items such as construction schedules, product data for doors and EIFS components, and installer qualifications.

Solicitation / RFP / RFQ

This solicitation is for the "Repair Doors and EIFS, B755" project located at 760 Military Hwy, Building 755, Minneapolis, Minnesota. The contractor will be responsible for providing all supervision, labor, materials, and equipment necessary to fully meet the requirements of the Statement of Work, Construction Specifications, Construction Drawings, and other related Contract Documents.

• Repair Exterior Insulation and Finish System (EIFS): Address cracks, holes, voids, joints, and apply a new finish coat.

• Repair Doors: Includes replacement of main entrance door operators, sensors, and controls; removal and brick infill of one double door; and replacement of a single door, frame, hardware, and accessories.

• Relocate Sign: Remove existing sign and exterior conduit, then mount a new sign in a designated location.

• Tank Level Alarm Conduit: Remove exterior conduit and reroute new conduit to the interior of the facility.

• Contract Type: Firm Fixed Price.

• Period of Performance: Within 10 calendar days of award, with a completion time of 120 calendar days.

• Performance Bonds: Required within 10 calendar days of award.

• Proposal Submission Deadline: April 15, 2026, by 3:00 PM local time.

• Site Visit: Scheduled for April 2, 2026, at 10:00 AM CST at Minneapolis Air Reserve Station, Building 860, 2nd Floor Contracting Conference Room 229.

• Evaluation: Quotes will be evaluated on a price-only basis. Award will be made to the lowest-priced responsible offeror whose quote is responsive.

• Submission Method: Email only to Caleb Anderson (caleb.anderson.15@us.af.mil) with a copy to Karen Gillen (karen.gillen@us.af.mil).

• This procurement is a 100% Small Business Set-Aside.

• Small Business Size Standard: $45,000,000.00 in average annual revenue under NAICS 236220.

• Offerors must complete specific sections of SF 1442 and other required forms.

• Site visit attendees require prior clearance via an Entry Access List (EAL).

Statement of Work (SOW) / Performance Work Statement (PWS)

This document outlines the scope of work for the "Sustain Doors and EIFS, Building 755" project at the Minneapolis Air Reserve Station.

• Repair the Base Exchange (Building 755) Exterior Insulation and Finish System (EIFS), including cracks, holes, voids, joints, and applying a new finish coat.

• Sustain doors: This includes replacing main entrance door operators, sensors, and controls; infilling one double door with brick; and replacing a single door, frame, and hardware.

• Relocate an existing sign and mount a new sign in a designated location.

• Reroute exterior tank level alarm conduit to the interior of the facility.

• The contractor shall provide all supervision, labor, materials, and equipment necessary to complete the work.

• Work areas are identified in Drawing (Attachment 1) and Specifications (Attachment 2).

• The Period of Performance shall be no longer than 120 calendar days from the notice to proceed.

• The work will be performed at the Minneapolis Air Reserve Station, Minneapolis, Minnesota.

• The contractor must adhere to all contract documents, including drawings and specifications. In case of conflict, the most stringent requirements apply, and specifications govern over drawings.

• The contractor shall review government-provided documents and existing field conditions to identify discrepancies and submit RFIs prior to construction.

• Substitutions and deviations require written approval from the Contracting Officer (CO).

• The contractor shall clean up all construction debris and dispose of waste off-site.

• A construction schedule must be provided with the proposal.

• The contractor must verify existing site conditions and identify potential conflicts.

• Protective coverings and barriers must be installed to protect non-work areas and equipment.

• The contractor shall provide and maintain sanitary facilities; government facilities will not be available.

• A quality control plan must be established and maintained.

• The contractor is responsible for field reconnaissance, surveys, site investigations, and testing.

• The contractor shall manage and dispose of hazardous waste in accordance with Section 3.6.

• Pre-Final and Final Inspections are required, with a contractor-provided punch list for the Pre-Final Inspection.

• Warranty documentation must be delivered to the Government following final inspection.

• Five percent (5%) of the contract value may be withheld until all project deliverables are submitted and accepted.

Forms / Attachments / Pricing Sheets

This document provides detailed specifications for various construction materials and processes, including:

• Section 01 11 00 - Summary of Work: Outlines the overall scope of work, project description, and location.

• Section 01 14 00 - Work Restrictions: Details regulations and limitations for working on the premises, including working hours, access, and safety.

• Section 01 32 16.00 20 - Small Project Construction Progress Schedules: Specifies requirements for submitting and updating construction progress schedules.

• Section 01 33 00 - Submittal Procedures: Defines the types of submittals required (e.g., preconstruction, product data, samples), their formats, and submission processes.

• Section 02 41 00 - Demolition and Deconstruction: Outlines requirements for demolition and deconstruction activities, including safety, disposal, and protection.

• Section 04 20 00 - Unit Masonry: Provides specifications for unit masonry, including materials, installation, and handling.

• Section 07 24 00 - Exterior Insulation and Finish Systems (EIFS): Details specifications for EIFS repairs, including materials, installation, and quality control.

• Section 08 11 13 - Steel Doors and Frames: Specifies requirements for insulated steel doors and frames, including materials, fabrication, installation, and finishes.

• Scope of Work: Repair of store front doors, EIFS repairs, door replacement, and related work at the Air Force Reserve Station, Minneapolis, MN.

• Submittal Requirements: Detailed procedures for various submittals, including preconstruction schedules, product data, samples, and manufacturer's instructions.

• Work Restrictions: Guidelines on working hours, site access, safety protocols (e.g., PPE, no smoking), and utility interruptions.

• Material Specifications: Specific standards and requirements for unit masonry, EIFS, and steel doors and frames, referencing various ASTM, TMS, and SDI standards.

• Installation Procedures: Step-by-step instructions for installing EIFS, masonry, and steel doors and frames.

This document is crucial for bidders as it defines the technical requirements, materials, and procedures for the construction work. It provides the detailed specifications necessary to understand the scope, quality, and execution standards expected for the opportunity. Bidders must carefully review these sections to accurately estimate costs, develop a compliant technical proposal, and understand the project's operational constraints.

Form / Attachment / Pricing Sheet

This document contains the final design drawings and details for the "Sustain Store Front Doors & EIFS, B755" project at the 934th Airlift Wing, United States Air Force Reserve. It provides technical specifications and visual representations for the proposed construction and repair work.

• Title Sheet (T001): Project overview, location, and list of included sheets.
• Existing Photos (G001): Visual documentation of the current state of Building 755, including the main entrance, EIFS damage, and biological growth.
• Demo Floor Plan & General Scope (AD101): Outlines demolition areas, general scope of work, and important notes regarding site access, working hours, and safety.
• Elevations (AD201): Detailed drawings of the building's exterior elevations, highlighting areas for repair and modification, along with general, EIFS, electrical, and door notes.
• Schedules (A601): Includes a lighting schedule and a detailed door schedule specifying hardware, frame types, and door types.
• Details (A602): Provides specific construction details for EIFS assemblies, door heads, jambs, sills, wall pack cover plates, and double door infill.

This document is crucial for potential bidders as it defines the exact scope of work, materials, and construction methods required for the "Sustain Store Front Doors & EIFS, B755" project. It details the necessary repairs and replacements for doors and the Exterior Insulation and Finish System (EIFS), as well as associated electrical and demolition tasks. Bidders must review these drawings and details thoroughly to accurately estimate costs and develop a compliant proposal.

Form / Attachment / Pricing Sheet

This document is a "General Decision Number" which serves as a wage determination for building construction projects in Hennepin County, Minnesota. It specifies the prevailing wage rates and fringes for various labor classifications.

• General Decision Number: MN20260053, effective 01/02/2026.
• Superseded Number: MN20250053.
• Geographic Area: Hennepin County, Minnesota.
• Construction Type: Building Construction Projects (excluding single-family homes or apartments up to and including 4 stories).
• Labor Classifications: Lists numerous job titles (e.g., Carpenter, Electrician, Plumber, Power Equipment Operator) with corresponding hourly wage rates and fringe benefits.
• Identifiers: Explains various identifiers (Union Rate, Union Average Rate, Survey Rate, State Adopted Rate) used to denote how the rates were determined.
• Appeals Process: Outlines the procedure for appealing wage determinations.
• Executive Orders: Mentions applicability of Executive Order 13706 (Paid Sick Leave) and Executive Order 13658 (minimum wage for federal contractors).

Bidders must use these prevailing wage rates to ensure compliance with labor standards for any federal construction contracts awarded in the specified area and for the specified construction type. Failure to adhere to these rates can result in penalties. The document is crucial for accurate cost estimation and proposal development.