Repair Main Gas Valve Bldg 100

Other / Unclassified

This document is a General Decision for Davis-Bacon Act prevailing wages, specifically for construction projects in California. It lists wage rates and fringe benefits for various trades across different counties. The document includes multiple modifications and supersedes previous decisions.

This document is crucial for any bidder on a federal construction project in California that is subject to the Davis-Bacon Act. It provides the legally mandated minimum wage rates and fringe benefits that must be paid to laborers and mechanics employed on the project. Bidders must consult this document to accurately calculate labor costs and ensure compliance with federal regulations. Failure to adhere to these wage rates can result in penalties and debarment. The document details rates for numerous trades including, but not limited to, Asbestos Removal Workers, Boilermakers, Bricklayers, Carpenters, Electricians, Ironworkers, Laborers, Painters, Plasterers, Plumbers, Roofers, Sheet Metal Workers, Sprinkler Fitters, Truck Drivers, and Welders.

Solicitation / RFP / RFQ

This document outlines the technical factors required for a contractor to be considered for award for the "Replace Main Gas Valve at Building 100" project. Bidders must submit a fully developed plan to execute contract performance and satisfy the Statement of Work (SOW).

• Procedure: A brief written work procedure (limited to two pages) must be provided to satisfy SOW requirements (section 3.0).
• Subcontractor Acknowledgment: If subcontractors are used, they must be selected at the time of quote submission. The business name and city of the selected subcontractor(s) must be provided. A primary and alternative subcontractor may be referenced.
• Qualifications: The SOW requires proof of competence. A current CA C-36 license (held by the prime or subcontractor) will satisfy this. The license number must be provided. Alternatively, an equivalent credential/certificate must be submitted for evaluation.

Bidders must address the concerns outlined above to be considered for award. Specific submission instructions and evaluation criteria are detailed within the full solicitation package (not provided in this excerpt).

This document focuses on the technical factors and qualification requirements for the solicitation.

Solicitation / RFP / RFQ

This solicitation (W50S6T26QA018) is a Request for Quotes (RFQ) for the repair of a main gas valve at Building 100, located at the 144 FW Air National Guard Base in Fresno, CA. The government intends to award a Firm Fixed Price (FFP) contract to the quoter offering the best value.

• Service: Repair of Main Gas Valve B100.

• Scope: Provide non-personal services including all plant, labor, transportation, materials, tools, equipment, appliances, and supervision necessary for the repair.

• Statement of Work (SOW): The repair must be completed in accordance with the attached Statement of Work (HAYW 06-1824).

• Inspection and Acceptance: To be performed in accordance with the SOW at the destination (AF BPN NO MILSBILLS PROCESSES, 5323 E. MCKINLEY AVE BLDG 125, FRESNO, CA 93727-2199).

• Contract Type: Firm Fixed Price (FFP).

• Period of Performance: July 6, 2026, to August 7, 2026.

• Estimated Value: Not explicitly stated, but the NAICS code is 238220 with a size standard of $19,000,000.00.

• Offer Due Date: June 11, 2026, at 2:00 PM.

• Submission Method: Quotes must be submitted electronically via email to jarrod.sanchez@us.af.mil and justin.scales.1@us.af.mil. The subject line must include the full solicitation number.

• Evaluation Factors: Offers will be evaluated based on technical factors (rated acceptable/unacceptable) and past performance (rated acceptable/unacceptable). All technical subfactors must be addressed and conform to the SOW. Past performance is acceptable if there are no discrepancies against recent government contract performance. Technical and past performance must be rated acceptable to be considered for award.

• Set-Aside: This solicitation is 100% set-aside for small businesses.

• Registration: Interested offerors must be registered with the System for Award Management (SAM).

• Wage Determination: Construction Wage Rate Requirements (Davis-Bacon Act) are applicable. Current prevailing wage determination(s) are attached.

• Questions: Submit questions via email to the contracting office. Interpretations will be posted on www.sam.gov.

• Amendments: Offerors are cautioned to check www.sam.gov frequently for amendments.

Statement of Work (SOW) / Performance Work Statement (PWS)

This Statement of Work (SOW) details the contractor requirements for the project titled "Replace Main Gas Valve at BLDG 100". The primary objective is to reconfigure approximately 30 linear feet of the existing gas pipe that connects to the main gas valve and main gas regulator for the 144th Fighter Wing installation at building 100.

• Site Visit: Conduct an on-site review of the existing natural gas system, meet with the Government (CE/COR), provide a proposed piping layout diagram, identify shutdown requirements, document existing conditions, and provide pre-construction photographs.

• Work Performance: All work must be performed in accordance with specified codes and standards, including UFC 3-420-01, UFC 3-430-05, Uniform Plumbing Code (UPC), NFPA 54, ASME B31.3, ASME B31.8, ASTM standards, OSHA standards, AFI and AFMAN engineering/safety standards, and manufacturer installation instructions.

• Specific Tasks:

  • Remove the existing regulator and install one new commercial-grade regulator.
  • Replace all necessary existing natural gas valves and remove unnecessary ones.
  • Install three cut-off valves to control gas flow.
  • Paint all new gas piping safety yellow and apply identification labels.

• Demolition: Materials removed will be inspected by the COR; disposable materials become the property of the Contractor.

• All work must be performed according to manufacturer specifications, industry best practices, and applicable codes (UPC, NFPA 54, UFC).

• Piping must be installed plumb, level, supported, and protected.

• Pressure testing, leak testing, and functional testing are required to verify full system operability.

• Performance will be evaluated against "Zero (0) defects" for replacing the gas valve and regulator, and for reconfiguring the gas line for better repair access and troubleshooting.

• Place of Performance: Fresno Air National Guard Base, 5323 McKinley Ave, Fresno, CA 93727.

• Period of Performance: No longer than 30 calendar days. Final phasing and schedule may be negotiated after award.

• Contractor Qualifications: The contractor must possess proper qualifications and provide proof of competence (e.g., contractor's license, certificates, training records).

• Submittals: Includes Project Schedule, Quality Control Plan, Base Access Request Form, Identification Media, Certificates of no debts, Before & After Photos, Recycling/Landfill proof, and O&M Manuals.

• Access & Security: Compliance with installation access, local security policies, and Antiterrorism Awareness Level I Training is required. Personnel require base access clearance and must provide necessary information for background checks.

• Hours of Operation: Typically 7:00 a.m. to 4:30 p.m., Monday through Friday, unless otherwise prescribed. No work on weekends, Federal Holidays, or SDOs without prior coordination.