J--Repair of Yosemite Overhead Distribution Line - Yo

Statement of Work (SOW)

To repair and restore commercial distribution power to the Wawona Tunnel in Yosemite National Park, which was damaged by falling trees during a heavy winter storm in March 2026.

This SOW outlines the tasks required for the repair of a 2.4 kV, Solid #2 copper, three-phase overhead distribution line. Key tasks include:

• De-tensioning and dropping damaged conductors (Phases 2 and 3).

• Repairing and splicing damaged conductor sections to restore mechanical strength and electrical continuity using accepted industry standards for #2 solid copper.

• Rehanging and re-tensioning repaired conductors on poles, ensuring proper spacing, tension, and sag.

• Pole climbing and access to structures approximately 45-50 ft in height.

• Determining and preparing the safest access route, considering both a long route via right-of-way and a shorter, steeper route.

• Maintaining worksite control and protection of natural resources, and removing contractor-generated debris.

• Repairs must restore full mechanical strength and electrical continuity of conductors.

• Conductor spacing, tension, and sag must be consistent with industry practice and existing line characteristics.

• Worksite control must maintain safe working distances and protect adjacent natural resources.

• Work must be completed within five (5) days of issuance of notice to proceed.

• The location is the 2.4 kV overhead distribution line supplying power to the Wawona Tunnel, Yosemite National Park.

• Safety Plan: Contractor must prepare and implement a site-specific Safety Plan including Job Hazard Analysis, Electrical Safety Procedures, Fall Protection Program, Emergency Response Plan, Communication Protocols, PPE requirements, and Daily Tailboard/Briefings. The plan must be submitted and acknowledged by NPS before work begins.

• Labor & Qualifications: All electrical line repair workers must be qualified electrical workers or apprentices under direct supervision.

• Equipment: Contractor must provide climbing gear, fall protection, rigging, tensioning tools, and specialized line equipment. Vehicles must be suitable for steep, rocky terrain.

• Environmental Protection: Avoid damage to soil, vegetation, or cultural resources. Report any inadvertent discoveries.

• Government-Furnished Materials (GFM): NPS will provide Solid #2 copper conductor, polymer insulators, and other required replacement hardware.

• Government-Furnished Services (GFS): NPS will ensure the line is de-energized, provide on-site personnel for questions, and assist with access coordination.

• Completion Report (description of repair, confirmation of integrity/tensioning, notes on deficiencies).

• Photo Documentation of repairs (before, during, after).

• On-site Final Walkthrough with NPS personnel.

Solicitation / RFP / RFQ

This solicitation is for the "Repair of Yosemite 2.4KV Overhead Distribution Line" at Yosemite National Park. The Department of the Interior, National Park Service requires a contractor to provide all supervision, labor, equipment, testing, and supplies for this repair and restoration of commercial distribution power to the Wawona Tunnel.

• Repair and restoration of the Yosemite 2.4KV Overhead Distribution Line.

• The work involves splicing/rehanging Phases 2 & 3 of the 2.4 kV solid #2 copper conductor, working on 45-50 ft steel poles, coordination with NPS for de-energization & grounding, environmental protections, and access considerations.

• A site-specific safety and health plan is required.

• The contractor must comply with applicable federal, state, and local safety and occupational health laws and regulations.

• The Government anticipates awarding a firm-fixed-price purchase order.

• The contract performance period is 5 calendar days after notice to proceed.

• The estimated value is within the range of $15.0K - $35.0K, though offers outside this range will be considered.

• Offers are due by 04/28/2026 at 1400 hours local time.

• Quotations must be submitted electronically via email to Timothy_Modjeski@ios.doi.gov.

• Evaluation will be based on Price, Schedule, Technical Approach, and Past Performance.

• A site visit is scheduled for Wednesday, April 15, 2026, at 9:00 AM PT. RSVP is required.

• This acquisition is a Total Small Business Set-Aside. Only small business concerns will be considered.

• Offerors must be registered in the System for Award Management (SAM).

• The North American Industry Classification System (NAICS) Code is 237130, with a size standard of $45.0 million in annual gross receipts.

• The Buy American Act applies to this solicitation.

• Davis-Bacon Wage Rates apply for this project.

Forms / Attachments / Pricing Sheets

This document is a "General Decision Number" which provides prevailing wage rates for various construction trades in California. It is an attachment to a SAM.gov opportunity record, likely to inform bidders about labor cost requirements for the project.

• General Decision Number: CA20260018, dated 01/30/2026.
• Applicable Construction Types: Building, Heavy (Heavy and Dredging), and Highway.
• Counties Covered: Alameda, Calaveras, Contra Costa, Fresno, Kings, Madera, Mariposa, Merced, Monterey, San Benito, San Francisco, San Joaquin, San Mateo, Santa Clara, Santa Cruz, Stanislaus, and Tuolumne Counties in California.
• Trade Classifications: Lists wage and fringe benefit rates for numerous trades including Asbestos Workers, Boilermakers, Bricklayers, Carpenters, Electricians, Ironworkers, Laborers, Painters, Plasterers, Plumbers, Roofers, Sheet Metal Workers, Sprinkler Fitters, Truck Drivers, and Welders.
• Modification History: Shows modifications to the wage determination with corresponding publication dates.

This document is crucial for bidders to accurately estimate labor costs for their proposals. Understanding the prevailing wage rates and fringe benefits for each trade in the specified counties is essential for developing a competitive and compliant bid. Bidders must ensure their proposed labor costs align with these determined rates.

Form / Attachment / Pricing Sheet

This document is Attachment 3, a Technical Information Form, for the "Repair of Yosemite 2.4KV Overhead Distribution Line" opportunity (RFQ No.: 140P8526Q0046). It requires bidders to provide specific information about their business, proposed team, and past performance.

Quoter Information:

• Business Name
• Address
• Unique Entity Identifier (UEI)
• Phone Number
• Contact Name
• Signature

Contractor's Proposed Team:

• Confirmation of self-performance or subcontracting.
• If subcontracting, a list of proposed subcontractors and their key trades.
• Description of work activities the bidder plans to self-perform if using subcontractors.

List of Past Performance References:

• For up to three projects:
  • Project Title
  • Agency/Owner
  • Performance Period
  • Contract Number (if known)
  • Contract Amount
  • A brief description of how the project is similar in nature and scope to the current requirement.
  • Contact information for a past performance reference (Name & Title, Phone Number, Email).

This form is crucial for proposal preparation. Bidders must accurately complete all sections to demonstrate their qualifications, capacity, and relevant experience to the government. Failure to provide complete and accurate information may impact the evaluation of their proposal.