RIGGING SERVICES BUILDINGS 136 & 2250

Form / Attachment / Pricing Sheet

This document is an Excel spreadsheet containing a price matrix and equipment lists related to rigging services. It includes sections for pricing, equipment details, and a needs calibration list.

• Price Matrix: Details CLINs, item/service descriptions, quantity, UOM, unit price, and total price. It specifies "Rigging Services at Building 136 & 2520" as a single lot with a quantity of 1 and a total price of $0.00. It also includes fields for company information and points of contact.
• Needs Cal Sheet: Lists various calibration items with serial numbers, categories, descriptions, and calibration due dates. This sheet appears to be an inventory of calibration needs rather than a pricing component.
• Equipment List: Provides a list of equipment to be moved, specifying the "Building From" and "Building To" locations, and dimensions for some items.
• New Pricing Matrix: Contains placeholders for "OFF-THE-SHELF GAGES" and "SPECIAL GAGES," with many fields showing #REF! errors, indicating incomplete or unlinked data.

This document provides specific details on the rigging services required, including the locations (Buildings 136 & 2520) and a list of equipment to be moved. Bidders should use the "PRICE MATRIX" sheet to fill in their pricing for the "Rigging Services at Building 136 & 2520" lot. The "B136 & 2520 Equipment List" provides context for the scope of the rigging work. The "Needs Cal" and "New Pricing Matrix" sheets may contain additional relevant information or require specific attention for completion, though the latter appears to have data issues.

Form / Attachment / Pricing Sheet

This document is a Wage Determination issued under the Service Contract Act, specifically Revision 32, dated May 13, 2026, for the state of Indiana. It lists occupational classifications and their corresponding minimum hourly wage rates and fringe benefits required for service contracts within specific Indiana counties (Crawford, Daviess, Dubois, Gibson, Greene, Jackson, Knox, Lawrence, Martin, Orange, and Pike).

• Occupational Codes and Titles: Lists various job classifications, from administrative support to transportation and miscellaneous occupations.
• Wage Rates: Provides the minimum hourly wage for each listed occupation.
• Fringe Benefits: Indicates that fringe benefits are required and follow the occupational listing. Specific health and welfare benefits are detailed at the end of the document.
• Executive Orders: Notes applicability of Executive Order 13706 (Paid Sick Leave) and Executive Order 13658 (Establishing a Minimum Wage for Federal Contractors), with associated benefit rates.
• Conformance Process: Outlines the procedure for requesting authorization of additional classifications and wage rates not listed in the determination.

This wage determination is crucial for bidders to understand the minimum labor costs associated with performing services under a contract covered by this determination. Bidders must ensure their proposed wages and benefits meet or exceed these requirements to be compliant. It directly impacts the cost proposal and overall feasibility of bidding on opportunities requiring services in the specified Indiana counties.

Form / Attachment / Pricing Sheet

This document lists required clauses and provisions by reference, as well as full text clauses and authorized deviations, that are applicable to the solicitation or contract. It also provides detailed instructions for Wide Area Workflow (WAWF) payment processing.

• Required Clauses and Provisions by Reference: A comprehensive list of FAR and DFARS clauses and provisions, including their titles and effective dates.
• Full Text Clauses: A selection of key clauses presented in full text, such as evaluation criteria, contract terms, and options to extend services.
• Authorized Deviations: Identifies clauses with authorized deviations, noting the specific regulation and the addition of "(DEVIATION)".
• WAWF Payment Instructions (252.232-7006): Details on how contractors must submit payment requests and receiving reports through the WAWF system, including:
  • Definitions of key terms (DoDAAC, Document Type, LPO).
  • Requirements for electronic invoicing via WAWF.
  • Steps for WAWF access and training.
  • Approved WAWF document types (Invoice 2in1, cost voucher, progress payment request, etc.).
  • A Routing Data Table with specific DoDAAC codes and other routing information for WAWF entries.
  • Requirements for payment requests and receiving reports.
  • WAWF points of contact for clarification and helpdesk support.

This document is critical for bidders to understand the contractual terms and conditions that will govern the contract. Specifically, the WAWF payment instructions are essential for understanding how to invoice and receive payment upon award, impacting financial operations and compliance. Bidders should review the listed clauses and provisions to ensure their proposals address all applicable requirements and to understand their rights and obligations.

Statement of Work (SOW) / Performance Work Statement (PWS)

This Task Order provides rigging, crane, and material handling services to relocate, remove, and install machinery and support equipment across multiple CAAA facilities. The work supplements in-house capabilities when internal resources are insufficient.

• Provide all labor, supervision, tools, materials, consumables, rigging devices, lifting equipment, and transportation for equipment moves.

• Comply with the BOA PWS and applicable OSHA, DoD, and CAAA safety requirements.

• Specific equipment to be moved includes:

  • From Building 2520 to Building 145: Nordson Epoxy Dispenser System, Electric Oven, Ink Jet Marking System, Laser Etcher 1, Laser Etcher 2, Robo-Mill.
  • From Building 2520 to Storage Location: Steam Oven 1, Steam Oven 2.
  • From Building 136 to Building 145: Friction Air Oven 1, Friction Air Oven 2.
  • From Building 136 to Building 200: Magneform System.

• Verify equipment dimensions, weight, center of gravity, and lifting points prior to movement.

• Conduct site visits and job analysis for rigging, lifting, and transport methods.

• Prepare equipment for safe movement (excluding utility disconnection).

• Provide necessary lifting equipment (cranes, forklifts, skates, jacks, rigging devices).

• Transport equipment between buildings or to designated storage locations.

• Set, level, align, and reassemble equipment at the new location.

• All rigging devices must meet OSHA 1926.251 requirements.

• Tools and equipment must be in good working order and compliant with OSHA safety requirements.

• Work interruptions exceeding 24 hours are only permitted for procurement of replacement parts, materials, or equipment.

• Maintain continuous progress and complete work within the agreed timeframe.

• Work can begin no earlier than August 10th, 2026.

• Work must be completed no later than September 9th, 2026.

• Performance begins upon Notice to Proceed and continues until all work is completed and accepted.

• Government Furnished Support includes: utility disconnection/reconnection, facility access/escorting, lockout/tagout support, identification of storage locations, and any identified government furnished equipment.

• CAAA is responsible for utility disconnection, lockout/tagout, and reconnection.

• Contractor shall not perform utility disconnection or reconnection.

• Purchases of tools or materials exceeding $200 require written COR approval.

• Subcontracting is permitted for specialized expertise or additional capacity.

• Customer Service Report (CSR)

• Lift and Rigging Plans (if required)

• Completion Report confirming equipment relocation, installation, or storage.

Form / Attachment / Pricing Sheet

This document lists equipment located in Buildings B136 and B2520. It specifies the current location (Building From) and the intended destination (Building To) for each piece of equipment. This information is relevant for contractors who may be responsible for moving this equipment as part of the opportunity.

• Equipment: A list of specific machinery and systems.
• Building From: The current building or area where the equipment is located.
• Building To: The designated building or area for the equipment's relocation.
• Dimensions: Provided for some items, with a note that contractors should verify dimensions prior to moving.

This attachment provides critical logistical information for potential bidders. It details the scope of equipment that may need to be moved, its current and intended locations, and highlights the need for contractors to assess dimensions. This will be important for planning moving operations, estimating resources, and understanding site conditions.