Senator Rosen Office Wall

Statement of Work (SOW) / Performance Work Statement (PWS)

To create a private office for Senator Rosen within their suite at the Bruce R. Thompson building by constructing a new partition wall and installing a door.

• Construct a new partition wall in office 7006.

• Install a new door and associated hardware.

• Provide finishes, including patching and repairing carpet, covebase, and painting.

• 3 5/8th inch, 20 GA minimum steel studs, 24 inch OC.

• Batt insulation.

• 5/8th inch gypsum board on each side.

• Braced to the existing suspended ceiling as needed.

• Painted on both sides to match existing.

• Knockdown or welded steel door frame.

• Solid core wood veneer door to match existing.

• Door hardware to match existing building standard.

• Not explicitly detailed, but work must be completed within 90 calendar days after notice to proceed.

• Contractor must provide a construction schedule within 3 working days of notice to proceed and weekly updates.

• Contractor must provide copies of material orders with tracking numbers.

• The project must be completed no later than 90 calendar days after a notice to proceed is issued.

• The location is Senator Rosen's office at the Bruce R. Thompson building, Reno, NV.

• Submittals: Product design, layout drawings, material submittals (3 copies), and technical information for door, door hardware, and paint samples are required prior to material purchase.

• Environmental, Energy Efficiency and Sustainable Product Requirements: GSA purchases must meet sustainable product requirements. Contractors must comply with EPA guidelines for recycled content, be Biobased or Biopreferred, use ENERGY STAR or FEMP compliant products, EPEAT registered products (if applicable), comply with "WaterSense", "Environmentally Preferable" standards, and SNAP. Documentation must be provided upon request.

• Security: Appropriate security clearances are required. No convicted felons are permitted on site. All personnel must wear GSA- Contractor Identification Badges.

• Work Hours: Project working hours are 7 AM to 5 PM. Work outside these hours is at no additional cost to the Government and must be scheduled to avoid disruption.

• Safety: Contractor is fully responsible for safety, implementing an applicable safety program, ensuring employee safety, and complying with OSHA regulations (29 CFR Part 1910, Subpart I) and personal protective equipment requirements.

• Site Conditions: Contractor must provide construction and safety barriers, confine work to the construction zone, conform to agency requirements, building codes, and GSA standards. Storage and staging areas are limited. Contractor is responsible for securing materials.

• Cleanliness: The work area must be maintained in a clean environment, with debris removed daily.

• Corrections: Any damage to existing walls, doors, or paint caused by the contractor's work must be corrected at no cost to the government.

• Warranty: A one-year warranty on all work and materials is required after contract acceptance.

• Ambiguities: Bidders must notify the Government of any errors, mistakes, or ambiguities in the specifications.

• Technical Correspondence: All technical correspondence should be directed to Michael Whelan at Michael.whelan@gsa.gov.

• Payment: Contractor will arrange for a job inspection with a GSA representative prior to submitting invoices for payment.

A detailed proposal showing material and labor costs for each line item, including Labor Burden, Contractor Profit, Contractor Overhead, Insurance, and Bond Rate, is required.

Solicitation / RFP / RFQ

This solicitation is for the removal and replacement of known damaged cast iron sanitary sewer piping located in the basement, garage areas, and the first and second floors of the Senator Rosen Office Wall at the Bruce R. Thompson US Courthouse in Reno, NV. The full project requirements are detailed in the solicitation package.

• Removal and replacement of damaged cast iron sanitary sewer piping.

• Not specified in this document.

• Solicitation Closes: July 20, 2026, at 4:00 PM PDT. Bids must be submitted by this date and time.

• Quotes Due: Between July 15, 2026, and July 20, 2026, 4:00 PM PDT.

• Submission of Questions/Pre-Bid RIFs: Must be submitted by June 24, 2026, 4:00 PM PDT via the provided link.

• Not specified in this document.

• Site Walk: Scheduled for June 17, 2026, at 10:00 AM PDT. Contractors must RSVP/register by June 16, 2026, 10:00 AM PDT via the provided link. The site walk is limited to four (4) personnel per firm, and at least one must be a representative of the prime contractor.

• Contacts:

  • Contracting Officer: Kasey Wilkie (kasey.wilkie@gsa.gov)
  • Contract Specialist: Erica Lal (erica.lal@gsa.gov)
  • Project Manager: Michael Whelan (michael.whelan@gsa.gov)

Solicitation / RFP / RFQ

This solicitation seeks quotes for a contract to construct the "Senator Rosen Office Wall." The acquisition is set-aside for Small Business concerns.

• Construction of the Senator Rosen Office Wall.

• Quotes must include a Price Quote, Technical Quote, and Representations and Certifications.

• Technical Approach (max 2 pages) should detail the construction approach, improvements, understanding of requirements, methodology, self-performed vs. subcontracted work, and risk mitigation.

• Experience on Similar Projects: Submit three project narratives (one page each) for projects completed within the last three years, with at least one project involving courthouse or similar judicial space.

• Contract Type: Firm-Fixed-Price.

• Estimated Price Range: Below $50,000.

• Bid Guarantee: Not Applicable.

• Payment/Performance Bonds: Required if the contract exceeds $35,000 but does not exceed $150,000.

• Quote Submission Deadline: July 20, 2026, by 4:00 PM Pacific Time.

• Submission Method: Electronic mail to kasey.wilkie@gsa.gov. Email subject line: "47PD5526Q0028 Quote - [Contractor Name]".

• Evaluation Method: Comparative evaluation based on Best Value. Quotes will be evaluated for acceptability but not ranked using non-cost/price factors. The Government may award to other than the lowest priced bidder.

• Key Deadlines:

  • Site Visit Registration: June 16, 2026, 10:00 AM Pacific Time.
  • Pre-Bid RFIs: June 24, 2026, 4:00 PM Pacific Time.
  • Site Visit: June 17, 2026, 10:00 AM Pacific Time.

• This solicitation is set-aside for Small Business firms.

• Bidders must have an "Active" System for Award Management (SAM) registration at the time of quote submission.

• The solicitation includes various FAR/GSAR provisions related to Buy American, Security Prohibitions, DEI Discrimination, and other requirements.

• Bidders are cautioned to read the entire solicitation and agreement carefully.

• The Government may use artificial intelligence tools to assist in quote review.

Solicitation / RFP / RFQ

This document is a solicitation (RFQ) for the construction of an office wall within Senator Rosen's office space at the Bruce R. Thompson U.S. Courthouse. It is issued under "The Agreement" for a "Simplified Acquisition Commercial Construction Contract for: Senator Rosen Office Wall".

• Construction of an office wall.

• Provision of all labor, materials, equipment, and supervision required for the construction.

• The deliverable is categorized under PSC: Z2AA -- REPAIR OR ALTERATION OF OFFICE BUILDINGS.

• Contract Type: Firm Fixed Price.

• Solicitation Number: 47PD5526Q0028

• Solicitation Issue Date: 6/10/2026

• Offer Due Date/Local Time: 7/20/2026, 4:00 PM (PDT)

• Contact for Solicitation Information: Erica Lal at (702) 388-6157.

• This acquisition is set aside 100% for Small Business.

• NAICS Code: 236220 (Commercial and Institutional Building Construction)

• Size Standard: $16.5 million

• FAR 52.212-1, 52.212-4, and 52.212-5 are incorporated by reference and attached.

• The place of performance is NV0294ZZ BRUCE R. THOMPSON COURTHOUSE, 400 S. VIRGINIA ST, RENO, NV 89501.

Solicitation / RFP / RFQ

This document, "The Agreement," serves as the contract for the "Simplified Acquisition Commercial Construction Contract for Senator Rosen Office Wall." The primary objective is to construct a private office within the Senator's existing office space at the Bruce R. Thompson US Courthouse.

• The contract encompasses the SF1449, the Agreement itself, Statement of Work, Specifications, Drawings, Exhibits, Amendments, Modifications, and other identified attachments.

• The Contractor is responsible for providing all labor, materials, equipment, tools, water, heat, utilities, transportation, and other necessary facilities and services for the work.

• The Scope of Work, "Senator Rosen's Office Wall Project," dated 05/12/2026, is a key incorporated document.

• Period of Performance:

  • Commencement: Within 10 days after receiving the Notice to Proceed (NTP).
  • Substantial Completion: No later than 90 calendar days from NTP.
  • Contract Completion: Within 30 calendar days of Substantial Completion.

• Liquidated Damages: The rate is $0 per calendar day.

• Submittals: The Contractor must prepare and submit shop drawings, samples, calculations, product information, mockups, and other submittals demonstrating compliance with contract requirements. Submittals require contractor approval prior to submission to the Contracting Officer.

• Project Schedule: A rational, reasonable, and realistic plan for completing the work is required. It must depict major activities, milestones (including NTP and Substantial Completion), and Contractor-defined milestones. The schedule must be submitted prior to NTP and updated weekly.

• This contract is a Total Small Business Set-Aside, as indicated by the incorporation of clause 52.219-6, "Notice of Total Small Business Set-Aside."

• The Contracting Officer's designated representative is Kasey Wilkie.

• The contract includes numerous FAR and GSAR clauses covering various aspects such as payments, security clearances, Buy American provisions, labor standards, and more. Bidders should review these clauses for specific requirements and obligations.

Form / Attachment / Pricing Sheet

This document is a General Decision, which serves as a wage determination for various construction-related labor classifications. It provides prevailing wage rates and fringe benefits applicable to federal contracts in the State of Nevada, specifically for counties of Washoe.

• Lists specific job classifications (e.g., Electrician, Carpenter, Power Equipment Operator, Laborer, Plumber, Welder).
• Provides the prevailing hourly wage rate and fringe benefit rate for each classification.
• Includes effective dates for these rates, which vary by classification and may be updated periodically.
• Contains notes on Executive Orders related to Paid Sick Leave (EO 13706) and Minimum Wage (EO 13658) for federal contractors.
• Explains identifiers used for different types of wage rates (Union, Union Average, Survey, State Adopted).
• Outlines the Wage Determination Appeals Process.

Bidders must use this document to understand the minimum wage and fringe benefit requirements for laborers and mechanics employed on federal construction projects in the specified geographic area. This information is crucial for accurately estimating labor costs in their proposals and ensuring compliance with federal labor laws.