Type N and 2.4 mm Power Transfer Standards

Form / Attachment / Pricing Sheet

This document outlines the detailed specifications and quantities for Type N and 2.4 mm Power Transfer Standards required by the National Institute of Standards and Technology (NIST), Communications Technology Laboratory (CTL), Radio Frequency Technology Division. These standards are needed to support research and measurement services in radio frequency and microwave power and are being acquired as part of an agreement with the Navy Primary Standards Laboratory.

Item 1-4: Type N Power Transfer Standards (Quantity: 3 Each for Impedance-Matched, 1 Each for Open Circuit, Short Circuit, and Mismatch Circuit)

• Impedance-Matched: Requires a 50 Ω Type N coaxial interface, DC to 18 GHz operating frequency, reflection coefficient magnitude < 0.10, max input power of at least 20 dBm, DC heater with 4-wire lead and 400-600 Ω resistance, thermopile sensitivity of at least 150 mV/W at DC, NTC resistor, dimensions < 90x30x30 mm, mass < 150 g, and includes a 1.5 m cable.
• Open Circuit: Same as impedance-matched, but with an open-circuit termination.
• Short Circuit: Same as impedance-matched, but with a short-circuit termination.
• Mismatch Circuit: Same as impedance-matched, but with a termination designed to partially reflect and dissipate RF power.

Item 5-8: 2.4 mm Power Transfer Standards (Quantity: 3 Each for Impedance-Matched, 1 Each for Open Circuit, Short Circuit, and Mismatch Circuit)

• Impedance-Matched: Requires a 50 Ω 2.4 mm coaxial interface, DC to 50 GHz operating frequency, reflection coefficient magnitude < 0.15, max input power of at least 20 dBm, DC heater with 4-wire lead and 400-600 Ω resistance, thermopile sensitivity of at least 150 mV/W at DC, NTC resistor, dimensions < 90x30x30 mm, mass < 120 g, and includes a 1.5 m cable.
• Open Circuit: Same as impedance-matched, but with an open-circuit termination.
• Short Circuit: Same as impedance-matched, but with a short-circuit termination.
• Mismatch Circuit: Same as impedance-matched, but with a termination designed to partially reflect and dissipate RF power.

General Vendor Requirements:

• Possess an Export Control Classification Number (ECCN) at time of award.
• Possess an active Unique Entity Identification Number (UEI) registered on SAM.gov.

Procurement Support Information and Ancillary Services:

• Planning Considerations: N/A.
• Shipping & Delivery: NIST-Boulder, ATTN: Provided at award, Mail Stop: 325 Broadway, Boulder, CO 80305. NIST-Gaithersburg, ATTN: Mail Stop: 100 Bureau Dr, Gaithersburg MD 20899. Partial delivery acceptable. Direct delivery to OU Building required. Delivery shall be competed no later than 4 months after contract award.
• Electronic Media: N/A.
• Installation: N/A.
• Facility / Utility Considerations: N/A.
• Inspection and Acceptance: Acceptance not expected to exceed 7 business days.
• Training: N/A.
• Warranty: Base Manufacturer Warranty acceptable, length 3-Years.
• Calibration: N/A.
• Maintenance: N/A.
• Government Furnished Material / Equipment: N/A.
• Travel: N/A.

This document provides the precise technical specifications and quantities for the power transfer standards being procured. Bidders must review these specifications carefully to determine their ability to meet the requirements for both Type N and 2.4 mm connectors, including impedance-matched, open circuit, short circuit, and mismatch circuit configurations. The document also outlines general vendor requirements, shipping details, and acceptance criteria, which are crucial for preparing a compliant proposal.

Solicitation / RFP / RFQ

This document is a combined synopsis/solicitation (Request for Quotation - RFQ) for commercial products, specifically Type N and 2.4 mm Power Transfer Standards. This announcement serves as the sole solicitation, and no separate written solicitation will be issued. The acquisition is being conducted on an unrestricted basis.

The government is procuring several types of power transfer standards, including:

• Type N Power Transfer Standard, Impedance-Matched (3 units)
• Type N Power Transfer Standard, Open Circuit (1 unit)
• Type N Power Transfer Standard, Short Circuit (1 unit)
• Type N Power Transfer Standard, Mismatch Circuit (1 unit)
• 2.4 mm Power Transfer Standard, Impedance-Matched (1 unit)
• 2.4 mm Power Transfer Standard, Open Circuit (1 unit)
• 2.4 mm Power Transfer Standard, Short Circuit (1 unit)
• 2.4 mm Power Transfer Standard, Mismatch Circuit (1 unit)

Detailed specifications for these items are provided in Attachment #1.

• Contract Type: Firm-fixed-price purchase order.

• Period of Performance: Not explicitly stated, but delivery and acceptance dates are required per Attachment #1.

• Estimated Value: Not stated.

• Submission Deadline: Quotations must be received by 1:00 PM MT on June 15, 2026.

• Submission Method: Electronic quotations via email to clifford.nicholson@nist.gov.

• Inquiries Deadline: Questions must be received in writing by 10:00 AM MT on June 11, 2026.

• Evaluation Criteria: Award will be made to the responsible quoter whose quotation is the lowest priced, technically acceptable quote. Technical capability (demonstration models, used, or refurbished instruments will not be considered) and price will be evaluated.

• NAICS Code: 334515 – Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals.

• Small Business Size Standard: 750 employees.

• Registration: Quoters must possess an ACTIVE registration in the System for Award Management (SAM.gov) at the time of quotation submission and until award.

• The solicitation incorporates provisions and clauses effective through Federal Acquisition Circular (FAC) 2026-01, with a class deviation for the Revolutionary FAR Overhaul (RFO).

• Quotations must be divided into three volumes: Technical, Price, and Terms and Conditions.

• Shipping and delivery costs must be included in the quotation.

Provisions and Clauses

This document details the applicable provisions and clauses for the "Type N and 2.4 mm Power Transfer Standards" opportunity (NB672010-26-01385). It outlines which provisions and clauses are incorporated by reference and provides instructions on how to access their full text.

• FAR 52.252-1 Solicitation Provisions Incorporated by Reference: Bidders are cautioned that some provisions may require completion and submission with their offer. Full text is available upon request or electronically.
• FAR 52.252-2 Clauses Incorporated by Reference: Similar to provisions, clauses are incorporated by reference and available upon request or electronically.
• FAR 52.252-5 & 52.252-6: Address authorized deviations in provisions and clauses.
• Specific Provisions: Includes FAR 52.203-11, 52.203-18, 52.204-7, 52.209-2, 52.209-11, 52.212-1, and 52.229-11.
• Specific Clauses: Includes FAR 52.202-1, 52.203-3, 52.203-6, 52.203-17, 52.203-19, 52.204-13, 52.204-19, 52.209-6, 52.209-10, 52.212-4, 52.219-8, 52.219-28, 52.222-3, 52.222-19, 52.222-35, 52.222-36, 52.222-37, 52.222-50, 52.222-90, 52.223-23, 52.225-5, 52.226-7, 52.226-8, 52.232-33, 52.232-39, 52.232-40, 52.233-3, 52.233-4, 52.247-64.
• Local Provisions/Clauses: Includes CAR 1352.233-70 (Agency Protests), CAR 1352.233-71 (GAO and Court of Federal Claims Protests), 1352.246-70 (Place of Acceptance), NIST LOCAL-39 (Marking/Packing Instructions), NIST LOCAL-53 (Contract Performance During Changes in NIST Operating Status), NIST LOCAL-54 (Electronic Billing Instructions), and NIST LOCAL-56 (Invoicing Processing Platform-Alternate I).

This document is critical for understanding the legal and contractual framework of the solicitation. Bidders must review these provisions and clauses to ensure compliance with all requirements, including submission instructions, representations, certifications, and invoicing procedures. Pay close attention to deviations indicated by "(DEVIATION)" and any specific instructions for completing forms or providing information.

• FAR 52.225-6 Trade Agreements Certificate: Requires certification regarding end products being U.S.-made or designated country end products.
• CAR 1352.233-70 & CAR 1352.233-71: Detail the procedures for filing agency and external protests.
• NIST LOCAL-39 Marking/Packing Instructions: Provides specific requirements for packaging and labeling shipments.
• NIST LOCAL-53 Contract Performance During Changes in NIST Operating Status: Outlines procedures for operating status changes and campus access.
• NIST LOCAL-54 Electronic Billing Instructions: Specifies electronic invoice submission requirements via email.
• NIST LOCAL-56 Invoicing Processing Platform-Alternate I: Details the use of the U.S. Department of the Treasury's Invoice Processing Platform (IPP) for payment requests.

Solicitation / RFP / RFQ

This document outlines the requirements for the procurement of Type N and 2.4 mm Power Transfer Standards. These standards are needed by the National Institute of Standards and Technology (NIST), Communications Technology Laboratory (CTL), Radio Frequency Technology Division, to support research and measurement services in radio frequency and microwave power. The acquisition is part of an agreement with the Navy Primary Standards Laboratory.

The solicitation details specifications for eight distinct items:

• Item 1-4: Type N Power Transfer Standards (4 each)

  • Impedance-Matched (3 each)
  • Open Circuit (1 each)
  • Short Circuit (1 each)
  • Mismatch Circuit (1 each)
  • Common specifications include a 50 Ω Type N coaxial interface, RF frequency range (DC to 18 GHz), reflection coefficient magnitude limits, maximum input power of at least 20 dBm, DC heater with specific resistance and lead configuration, a thermopile for sensing heat, and dimensions/mass limits. A 1.5 m cable is required for each.

• Item 5-8: 2.4 mm Power Transfer Standards (4 each)

  • Impedance-Matched (3 each)
  • Open Circuit (1 each)
  • Short Circuit (1 each)
  • Mismatch Circuit (1 each)
  • Similar specifications to Type N standards but with a 2.4 mm coaxial interface and an RF frequency range from DC to 50 GHz. Reflection coefficient magnitude limit is less than 0.15. Dimensions/mass limits are also specified, along with a 1.5 m cable.

• The document specifies vendor requirements including possessing an Export Control Classification Number (ECCN) and an active Unique Entity Identification Number (UEI) on SAM.gov at the time of award.

• Delivery is expected no later than 4 months after contract award.

• Base Manufacturer Warranty is acceptable.

• Calibration and Maintenance requirements are outlined, with options for multiple periods.

• Specific submission instructions are not detailed in this document, but it outlines vendor requirements and delivery criteria.

• Acceptance is not expected to exceed 7 business days.

• No specific set-aside information is provided.

• Shipping address is NIST-Boulder, ATTN: Provided at award, Mail Stop: 325 Broadway, Boulder, CO 80305.

• Partial delivery is acceptable.

• Travel estimates should be included as part of pertinent sections (Installation, Maintenance, Repair, etc.) unless otherwise specified.