Whiteriver Hospital Construction

Amendment / Modification

This addendum (Addendum-A) serves to clarify, revise, and supersede information in the Project Manual, Drawings, and previously issued Addenda for the IHS Whiteriver Hospital project. Key changes and clarifications include:

• Bid Options: Clarifications regarding ADOT table, dietary fin details, and a bid option for delegated design for radon mitigation.
• Specifications: Revisions and clarifications to numerous sections of the Project Manual, including but not limited to:
  • Options (Radon Mitigation)
  • Door Hardware (clarifying elevations and hardware)
  • Attic Stock, Spare Parts, and Extra Materials
  • Glazing, Exterior Painting, Interior Painting, Signage
  • General Requirements for Laboratory Casework and Fume Hoods
  • Countertops, various Plumbing Piping components (ball, butterfly, check, gate valves), Domestic Water systems (piping, specialties, pumps, softeners, filtration), Gas Piping, Hydronic Pumps, HVAC components (fans, ventilators, air curtains, split-system AC, fan coil units, unit heaters, humidifiers), Lighting Control Devices, Low-Voltage Switchgear, Switchboards, Panelboards, Wiring Devices, Enclosed Switches and Circuit Breakers, Transfer Switches, Interior and Exterior Lighting, Communications Cabling, Fire-Alarm System, and Irrigation System.
• Drawings: Revisions to specific drawing sheets, including:
  • General Notes & Design Data (clarification to Rip Rap Gradation Table)
  • Typical Sections (clarification to Pavement Section 1 & 2)
  • Paving Plan & Profile (clarifications to Construction Notes regarding "Dump Rip Rap")
  • Site Details (clarification regarding "Security Bollard")
  • Interior Elevations and Door/Frame Elevations (clarifications)
  • Interior Storefront Elevations (clarifications to finishes)
  • Miscellaneous Interior Details (clarifications)
  • Interior Finish Schedule and Details (clarification to Interior Glass Finish)
  • Enlarged Plan for Casework and Lab Accessories (clarification to lab coat rack hook)
  • HVAC Plans (clarifications regarding Emergency Power Off for Boiler Emergency Shutdown)
  • Electrical One Line Diagrams for various SES (A-E) and UPS/Solar (clarifications to General Sheet Notes).
  • Distribution and Panel Board Schedules (clarifications to notes for various switchboards).
  • Storm Drain Plans (clarifications to construction notes regarding "Drain Basin MAG Grate", "Drain Basin Grated Sump Inlet", and "Drain Basin w/ Grated Lid").
  • Details (clarifications to specific detail numbers).
• Other: Confirmation of attic stock, addition of boiler emergency shutdown to the electrical CUP power plan, UL construction configuration of major electrical equipment, added SPD to SES's, and door hardware and elevations clarifications.

Numerous sections of the Project Manual and specific drawing sheets have been revised or clarified. Refer to the document for a comprehensive list.

Bidders shall acknowledge receipt of this Addendum in the appropriate space on the Bid Form. The changes incorporated by this Addendum will be incorporated into the Contract by enumeration in the Owner/Contractor Agreement.

Questions & Answers / Clarifications

This document contains responses to Requests for Information (RFIs) submitted by potential bidders regarding the Whiteriver Hospital project. It clarifies various aspects of the project's specifications, drawings, and materials.

• Headwalls: The design team is open to pre-manufactured headwalls, though current documents depict a stick-built method. A Substitution Request is required for pre-manufactured options. Headwalls are Contractor Furnished/Contractor Installed (CFCI). The GC is responsible for providing the entire wall assembly, including panels and headwalls.
• Civil/Site Work: Clarifications were provided on lift station details, cattle guard sizing, storm drain material alternatives (HDPE vs. CMP Spiral rib), catch basin and manhole callouts, and pipe sizes. Bidders are instructed to follow construction notes for most civil elements.
• Materials & Finishes: Specific guidance was given on handrail types, bollard models (non-illuminated), QTZ-3 specification (use QTZ-2), Category 6A cabling (unshielded connectors and patch cords), and the application of "Hospital Stops" on door frames (required in heavily sanitized areas only).
• Doors & Hardware: Clarifications were provided for "SL" elevation doors (barn-door style sliding doors), confirming single-sourcing for wood doors, and the suitability of hardware set 178.0 for aluminum-framed full glass doors. Lead-lined slider doors are not anticipated but will be verified by a physicist report.
• Exterior Panels & Finishes: ACM panels are specified for exterior wall panels and soffits, matching Terra Cotta color. Clarification on ACM, Trespa, and K-wall indicates ACM is the desired material.
• Electrical: The location and revised nomenclature for electrical distribution panel "EDW2EH" (revised to EDE2EH) were clarified, located in room ELC-2046.
• BIM/CAD Files: Civil CAD drawings and BIM models will not be shared during the solicitation period due to file size and designer risk. Access may be discussed after award.
• Manufacturer Equivalents: Generally, "or equal" manufacturers are allowed if they meet specifications, with exceptions for IT, medical gas, specific communication protocols, and the Building Automated System (BAS), which must be Automated Logic. Equivalents are to be submitted for review after award, not during the solicitation period.

These clarifications address ambiguities in the drawings and specifications, aiding bidders in preparing accurate proposals. Some clarifications will be incorporated into forthcoming addenda.

Forms / Attachments / Pricing Sheets

This document contains electrical one-line diagrams and panel schedules for the IHS Whiteriver Hospital project. It details the power distribution system, including switchboards, panelboards, transformers, and associated circuiting.

• One-Line Diagrams (Sheets E5.1.1 through E5.6): These diagrams illustrate the electrical power distribution system, including service entrances, switchboards (SES-A through SES-E), automatic transfer switches (ATS), generators, transformers, and UPS systems. They specify feeder schedules, conductor sizes, and equipment ratings.
• Panel Schedules (Sheets E8.2.A1 through E8.2.E1): These schedules provide detailed information for various switchboards and panelboards, listing circuit descriptions, number of poles, frame size, trip rating, load (in VA), and remarks. They also include load classifications, connected loads, demand factors, and estimated demands.
• General Sheet Notes: These notes provide important project-specific information, including references to other drawing series, requirements for panel nameplates and schedules, specifications for surge protection devices and meters, and the need for bused electrical equipment circuit spaces.

This document is crucial for any bidder involved in the electrical scope of work for the IHS Whiteriver Hospital project. It provides the detailed specifications and layout of the electrical distribution system, which is essential for understanding power requirements, load calculations, equipment specifications, and installation details. Bidders must consult these schedules and diagrams to accurately price and plan their electrical installations, ensuring compliance with National Electrical Code (NEC) standards and project-specific requirements.

Amendment / Modification

This amendment (A00002) to Solicitation 75H70126R00016 revises the following:

• SmithGroup's Addendum A: This addendum addresses several items including:
  • ADOT table
  • Dietary Fin details
  • Bid Option for delegated design for Radon Mitigation
  • Confirmation of Attic Stock
  • Addition of Boiler Emergency Shutdown to Electrical Cup Power Plan
  • UL Construction Configuration of Major Electrical Equipment
  • Addition of SPD to SES's
  • Clarifications regarding Door Hardware and Elevations.
  • Specific drawing files and specifications are listed (A2-1a through A2-1h).
• Pre-Proposal RFIs: RFIs 001-050 are provided as attachment (A2-2). Note that remaining RFIs will be addressed in a future amendment.
• Proposal Due Date: The proposal due date and time have been extended to May 28, 2026, at 2:00 PM PT.

• SmithGroup's Addendum A (referenced as A2-1a through A2-1h)

• Pre-Proposal RFIs 001-050 (attachment A2-2)

• Proposal submission deadline

• The proposal deadline has been extended to May 28, 2026, at 2:00 PM PT.

• Offerors must acknowledge receipt of this amendment by number and date on their cover letter or by submitting a signed copy of the SF30.

Form / Attachment / Pricing Sheet

This document contains "General Notes & Design Data" for the IHS Whiteriver Hospital project, specifically related to SR 73 improvements. It provides essential background information and specifications for bidders.

• Design Data: Includes traffic projections (2024 AADT and 2044 AADT for SR 73), posted speed, and design speed.
• Earthwork Quantities: Estimated volumes for excavation, embankment, and waste.
• Project Length: Details the segment of SR 73 involved (STA 337+50.00 to STA 355+82.00), totaling 1,832.00 feet (0.35 miles).
• Index of Sheets: Lists all associated drawing sheets for the project.
• Reference Information: Cites relevant ADOT standard drawings and project numbers.
• Construction Notes: Includes general notes on earthwork calculations, pavement striping, right-of-way information, utility locations, and traffic control requirements.
• Specific Details: Provides details on riprap gradation, flow-thru scupper construction, and material specifications (e.g., concrete class, plated steel).

This document is crucial for bidders to understand the project's scope, scale, and specific technical requirements. It outlines the design parameters, estimated quantities, and construction standards that will govern the work, directly impacting bid preparation and project execution.

Form / Attachment / Pricing Sheet

This document contains detailed architectural and landscape drawings related to the IHS Whiteriver Hospital project. It provides specific design elements, construction details, and site plans.

• Flagpole Details: Specifications for flagpole assembly, including materials, dimensions, and installation.
• Security Bollard and Gate Details: Construction details for security bollards and a vehicular security gate, including foundation requirements and materials.
• Site Details: Information on pedestrian walkways, drive aisle crossings, and timber steps, including material specifications and finishes.
• Concrete Patterns: Details on integral color concrete patterns for courtyards and walkways, with specific color and finish requirements.
• Project Information: Includes IHS Project Number (131445), IHS Contract Number (75H70123R00008), and Award Date (02/02/2024).

This document is crucial for bidders to understand the physical scope, materials, and specific construction requirements for the landscape and site work components of the IHS Whiteriver Hospital project. It informs the technical approach, material selection, and cost estimation for proposals.

Amendment / Modification

This document is a "BID ADDENDUM-A" issued on April 16, 2026. It is part of the "FINAL CONSTRUCTION DOCUMENTS" issued on January 23, 2026.

This addendum revises information previously issued in the "FINAL CONSTRUCTION DOCUMENTS" dated January 23, 2026, and is based on the "PROGRAM OF REQUIREMENTS" dated March 26, 2022, and "AMENDMENT" dated February 3, 2025, with "SCHEMATIC DRAWINGS" approved November 19, 2024.

As this is a bid addendum for construction documents, it likely impacts the final requirements and details for bidding on the project. Bidders should review this addendum in conjunction with all prior documents.

Form / Attachment / Pricing Sheet

This document contains "Bid Addendum-A" for the IHS Whiteriver Hospital Utility Campus project. It includes "Storm Drain Plan" sheets (C3.03, C3.04) and "Details" sheets (C8.01) related to the construction documents.

• Storm Drain Plans (C3.03, C3.04): Detail the layout and specifications for storm drain systems, including pipe sizes, gradients, drain basins, and flared end sections. These sheets also indicate the 500-year floodplain limits and show the locations of new buildings and water tanks.
• Details (C8.01): Provides specific construction details for two types of water storage tanks: a 32' diameter, 150,000-gallon reclaimed water storage tank and a 42' diameter, 325,000-gallon domestic water storage tank. Details include dimensions, access points, vents, inlets, outlets, and overflow configurations. It also references specific standards (IBC, OSHA, AWWA D100) and components like mechanical level indicators.
• Construction Notes: Outlines materials and methods for storm drain systems (HDPE pipe, specific drain basin types) and underground retention tanks.
• Reference Notes: Directs bidders to other relevant drawing sets for utility improvements, drainage, new buildings, access roads, and retaining walls.

This addendum provides critical details for the storm drainage infrastructure and water storage tanks. Bidders must review these plans and details to accurately understand the scope of work, material requirements, and construction specifications for these components of the IHS Whiteriver Hospital Utility Campus project. The "Bid Addendum-A" designation indicates this is a modification to previously issued documents, and bidders should ensure they are using the most current information.

Form / Attachment / Pricing Sheet

This document is a drawing sheet (C9.01) titled "DETAILS" for "BUILDING PACKAGE 3 (BP3) HON-DAH UTILITY CAMPUS". It provides detailed drawings and specifications for a reclaimed water storage tank and related components.

• Detailed diagrams of a 33' diameter reclaimed water storage tank with a capacity of approximately 201,400 gallons.
• Specifications for tank components including manways, access hatch, overflow, drain valve, and inlet/outlet pipes.
• References to specific details on other drawing sheets (C9.02).
• Notes regarding tank manufacturer's shop drawings and compliance with relevant codes (IBC, OSHA, AWWA D100).
• Includes project information such as IHS Project #, Contract #, and Award Date.

This drawing sheet is crucial for bidders to understand the specific design and technical requirements for the reclaimed water storage tank. It details the physical dimensions, required components, and installation specifications, which will inform cost estimations, material procurement, and construction planning for this part of the project.

Solicitation / RFP / RFQ

This document is a Solicitation, Offer, and Award form (Standard Form 1442) for the Whiteriver Hospital Construction project located in Whiteriver, AZ. The Indian Health Service is issuing this solicitation.

The solicitation is for construction services. Specific details regarding the work requirements are referenced in Section L.8 for Proposal Submittal Instructions.

• The North American Industry Classification System (NAICS) code is 236220 (Commercial and Institutional Building Construction).

• The associated size standard for this procurement is $45 million.

• The estimated magnitude of this construction project is between $500,000,000 and $600,000,000.

• The contractor shall begin performance within 10 calendar days after award and complete within 1095 calendar days.

• Performance and Payment Bonds are required within 10 days after award.

• Offers are due by 2:00 PM local time on 5/28/2026.

• Offers must be submitted in original and 0 copies.

• Sealed envelopes containing offers must be marked with the offeror's name and address, solicitation number, and date/time of due.

• Offers providing less than 60 calendar days for Government acceptance will be rejected.

This acquisition is being solicited as Unrestricted, open to both large and small businesses.

This is a negotiated solicitation (RFP) issued on 03/12/2026. The solicitation number is 75H70126R00016. Contact Erik Lundstrom at 240-485-6419 or erik.lundstrom@ihs.gov for information.

Amendment / Modification

This document is a "BID ADDENDUM-A" dated 16 APRIL 2026, which modifies the "FINAL CONSTRUCTION DOCUMENTS" for the "INDIAN HEALTH SERVICE WHITERIVER HOSPITAL".

This addendum revises or adds information to multiple sections of the original construction documents. Key sections affected include:

• Section 012300 - OPTIONS: Details additive options for various systems, including water filtration, spray fields, acoustic flooring, circadian lighting, bipolar ionization air filters, photovoltaic systems, video surveillance cameras, acoustical panels, utility campus improvements, PLC cabinets, radon mitigation, and Hon-Dah utility campus.
• Section 087100 - DOOR HARDWARE: Revises specifications for certain doors (EMR-1272-2, EMR-1273-2) to include self-closing and latching hardware for smoke-rated doors.
• Section 088000 - GLAZING: Includes additive "(Add. A)" for specific glass types (GL-6) and maintenance material submittals.
• Section 099113 - EXTERIOR PAINTING: Includes additive "(Add A)" for maintenance material submittals.
• Section 099123 - INTERIOR PAINTING: Includes additive "(Add A)" for maintenance material submittals.
• Section 101400 - SIGNAGE: Includes additive "(Add. A)" for specific sign types and extra materials.
• Section 123553 - GENERAL REQUIREMENTS FOR LABORATORY CASEWORK AND FUME HOODS: Includes additive "(Add. A)" for specific products and extra materials.
• Section 123661.19 - QUARTZ AGGLOMERATE COUNTERTOPS: Includes additive "(Add. A)" for maintenance material submittals.
• Section 220523.12 - BALL VALVES FOR PLUMBING PIPING: Includes additive "(Add. A)" for extra stock materials.
• Section 220523.13 - BUTTERFLY VALVES FOR PLUMBING PIPING: Includes additive "(Add. A)" for extra stock materials.
• Section 220523.14 - CHECK VALVES FOR PLUMBING PIPING: Includes additive "(Add. A)" for extra stock materials.
• Section 220523.15 - GATE VALVES FOR PLUMBING PIPING: Includes additive "(Add. A)" for extra stock materials.
• Section 221116 - DOMESTIC WATER PIPING: Includes additive "(Add. A)" for extra stock materials.
• Section 221119 - DOMESTIC WATER PIPING SPECIALTIES: Includes additive "(Add. A)" for extra stock materials.
• Section 223200 - DOMESTIC WATER FILTRATION EQUIPMENT: Includes additive "(Add. A)" for extra stock materials.
• Section 223100 - DOMESTIC WATER SOFTENERS: Includes additive "(Add. A)" for extra stock materials.
• Section 233416 - CENTRIFUGAL HVAC FANS: Includes additive "(Add. A)" for motors.
• Section 262300 - LOW-VOLTAGE SWITCHGEAR: Includes additive "(Add. A)" for maintenance material submittals.
• Section 262413 - SWITCHBOARDS: Includes additive "(Add. A)" for circuit breakers.
• Section 262416 - PANELBOARDS: Includes additive "(Add. A)" for circuit breakers.
• Section 262726 - WIRING DEVICES: Includes additive "(Add. A)" for receptacles and switches.
• Section 262816 - ENCLOSED SWITCHES AND CIRCUIT BREAKERS: Includes additive "(Add. A)" for fuses and fusible devices.
• Section 263600 - TRANSFER SWITCHES: Includes additive "(Add. A)" for extra materials.
• Section 283111 - DIGITAL, ADDRESSABLE FIRE-ALARM SYSTEM: Includes additive "(Add. A)" for extra stock materials.

Bidders must review all sections for potential impacts on their proposals, including any modifications to requirements, specifications, or submission deadlines. The "(Add. A)" notations indicate where specific additions or modifications are made within the document.

Amendment / Modification

This amendment (A00001) to Solicitation 75H70126R00016 for the Whiteriver Hospital Construction project provides the following:

• Pre-Proposal Meeting Information: Presentations (A1-1a and b) and Sign-in Sheets (A1-2a and b) from the pre-proposal meeting are now provided.
• Pre-Proposal RFIs: Responses to RFIs 001-008 (Attachment A1-3) are included. Remaining RFIs will be addressed in a future amendment.
• Clause Updates: Due to the Revolutionary FAR Overhaul (RFO), the following clauses have been updated or deleted:
  • Section I, Clause 52.248-3 Value Engineering-Construction (Oct 2025)
  • Section I, Clause 52.219-9 Small Business Subcontracting Plan – Alt II (DEVIATION) (RFO Feb 2026)
  • RFO FAR deviation text is available at https://www.acquisition.gov/far-overhaul

• Section I, Clauses (specifically 52.248-3 and 52.219-9)

• Pre-Proposal Meeting Materials

• RFIs

• The proposal due date and time remain unchanged: May 12, 2026, at 2:00 PM PT.

• Offerors must acknowledge receipt of this amendment by number and date on their cover letter or by submitting a signed copy of the SF30.

Other / Unclassified

This document is a presentation from a pre-proposal meeting held on April 8, 2026, for the Whiteriver Hospital project. It outlines the "Cultural Journey" and "Design" aspects of the project, emphasizing the integration of White Mountain Apache traditions, stories, and the natural environment into the hospital's design.

This presentation provides context for potential bidders regarding the project's cultural and design philosophy. It highlights the importance of honoring local traditions, the natural landscape (including flora, fauna, and geological features), and the White Mountain Apache Tribe's heritage in the development of the Whiteriver Replacement Hospital. Key elements discussed include:

• Cultural Integration: The design aims to create a modern medical center that honors traditions and stories, is uniquely WMAT, and is site-specific.
• Site and Environment: The presentation showcases the natural surroundings, including "Sunrise Mountain," "The Hallway" (a path of the Gan), medicinal plants, and various textures and landscapes, all influencing the design.
• Design Concepts: It details the "Program Stacking" for different hospital floors (First Floor: Emergency, Imaging, Pharmacy, Lab, Wellness; Second Floor: Labor & Delivery, Surgery, etc.; Third Floor: Acute Care, Behavioral Health, Primary Care; Fourth Floor: Administration, Specialty Care, Dental).
• Interior Design: The conceptual approach focuses on a "sacred connection" to the natural world, drawing inspiration from the river, canyons, and plant life. Custom resin panels with native plants and graphics inspired by cultural elements (insects, hummingbirds, crown dancers, eagles) are featured.
• Visualizations: The document includes renderings of the site approach, new site entrance, building approach (Plaza and Hallway), lobby, dining area, primary care waiting area, and labor and delivery rooms, illustrating how the cultural and environmental themes are translated into the physical space.

This information is crucial for bidders to understand the project's unique requirements and the cultural sensitivity expected in its execution.

Other / Unclassified

This document is a sign-in sheet for the Whittier Hospital Construction Pre-Proposal Meeting. It lists attendees, their companies, email addresses, and phone numbers.

This information is relevant to potential bidders as it indicates companies that have expressed interest in the opportunity by attending the pre-proposal meeting. It can be used for networking or to gauge the level of competition.

Questions & Answers / Clarifications

This document contains responses to Requests for Information (RFIs) submitted by potential bidders regarding the solicitation.

• Headwalls: The design team is open to pre-manufactured headwalls, though current documents depict a stick-built method. Bidders wishing to use pre-manufactured headwalls must submit a Substitution Request. Headwalls will be Contractor Furnished/Contractor Installed (CFCI). The GC is responsible for providing the entire wall assembly, including panels and accessories, and coordinating custom patterns with the Finish Schedule. Pricing format between GC and supplier is determined by the GC, but must follow the solicitation's format for submission to IHS.
• Lift Station: Clarification is requested regarding whether the lift station is new or existing, and the depth of the diversion manhole.
• Cattle Guard: The required size for the cattle guard is requested.
• Storm Drain Pipe Size: A question arises about providing an alternate material (CMP Spiral rib) for 72" HDPE storm drain pipe, as 60" is the largest offered.
• Catch Basin Detail: More detail is requested for storm drain catch basins off of water tanks.
• Drainage Discrepancy: A discrepancy between the plan and profile views for a 24" run versus an 18" run in the drainage system is noted.
• Pipe Footage Differences: Random sections show differences between pipe footage on plans and profiles.
• Catch Basin/Manhole Identification: Clarification is sought on how to identify catch basins and manholes that share the same designation ('SD' with a circle).

These clarifications address potential ambiguities in the original solicitation documents, particularly concerning headwall specifications, drainage systems, and site utilities. Bidders should review these responses carefully as they may impact pricing, material selection, and overall project approach. No changes to submission deadlines or evaluation factors are indicated.

Other / Unclassified

This document is a presentation from a pre-proposal meeting held on April 8, 2026, for the Whiteriver Hospital Project by the Indian Health Service (IHS). It outlines the project's scope, construction challenges, key personnel, contracting information, and site walk details.

This presentation provides crucial context for potential bidders regarding the Whiteriver Hospital Project. It details:

• Project Overview: Includes the hospital campus, hospital WWTP and storage tanks, SWTP, and Hon-Dah WWTP.
• Construction Challenges: Highlights potential issues such as campus logistics, traffic flow, parking, staging areas, phasing, mobilization, construction water availability, fire department access, and road limitations for heavy equipment.
• Contracting Information: Outlines the solicitation format, key dates (including proposal due date and estimated award date), and the process for submitting Requests for Information (RFIs). It also lists the evaluation factors: Technical Experience, Technical Approach & Draft Schedule, Key Personnel & Organizational Chart, and Past Performance.
• TERO Information: Details the WMAT Tribal Employment Right Ordinance requirements, including compliance plans, fees, and contact information.
• Site Walk Information: Provides instructions and locations for a site walk, emphasizing that information shared during the pre-proposal meeting is not official and official answers will be provided through the RFI process.

This document is essential for understanding the project's scope, potential complexities, and the process for submitting proposals and seeking clarifications.

Other / Unclassified

This document is a sign-in sheet from a pre-proposal meeting for the Whitieriver Hospital Construction project. It lists attendees' names, companies, email addresses, and phone numbers.

This document is relevant to potential bidders as it provides contact information for individuals who attended the pre-proposal meeting. This can be useful for networking, seeking clarification, or understanding the competitive landscape.

Form / Attachment / Pricing Sheet

This document contains the "Seals Page" for the IHS Whiteriver Hospital Final Construction Documents, dated January 23, 2026. It serves to provide the seals of the design professionals of record, as required by statute, and includes descriptions of the Specification Sections prepared under their direction. Additionally, it provides detailed specifications for "COLD FORMED METAL FRAMING" (Section 054000), outlining requirements for materials, fabrication, and installation of cold-formed steel framing systems, including specific standards, tolerances, and procedures.

Seals Page:

• Architect: SmithGroup, Inc. (Matthew Hess, AIA, NCARB)
• Structural Engineer: PK Associates and Pimara Paul Koehler (Christa Chau, PE, SE); Morrison-Maierle (Michael Brennan, PE)
• Civil Engineer: Dibble & Associates Consulting Engineers, Inc. (Christina Shannon Mauck, PE, Ian B. Mowry, PE)
• Fire Protection Engineer: Smith Group, Inc. (Andrew Ochsankehl, PE)
• Electrical Engineer: SmithGroup, Inc. (Daniel L. Peterson, PE); Morrison-Maierle (Michael Brandt, PE)
• Communications (AV, IT, Security) Designer: Smith Group, Inc. (David K. Glenn, RCDD)
• Landscape Architect: Smith Group, Inc. (Richard P. Jones, PLA)
• Plumbing Engineer: Morrison-Maierle (Jody Waverek, PE)
• Mechanical Engineer: Morrison-Maierle (Jody Waverek, PE)
• Environmental Engineer: Morrison-Maierle (Ulrike Lashley, PE)
• Hazardous Building Materials: Mabbett & Associates, Inc. (Michael Delaney, Asbestos Designer)

Cold Formed Metal Framing (Section 054000):

• Materials: Specifies steel grades, coatings, and galvanizing repair paint.
• Fabrication: Details requirements for framing assemblies, including cutting, fastening methods, and tolerances.
• Installation: Outlines procedures for preparation, anchoring, and specific requirements for exterior/interior walls and joists.
• Tolerances: Defines allowable variations for level, plumb, and true-to-line installation.
• Field Quality Control: Specifies testing and inspection requirements.
• Repairs: Details procedures for galvanizing repairs and final protection.

This document is crucial for bidders as it identifies the licensed design professionals responsible for the project, confirming the construction documents are prepared and sealed by qualified professionals. Bidders should note the responsible parties for specific design-related inquiries. The detailed specifications for cold-formed metal framing directly impact structural integrity and compliance, requiring bidders to ensure their proposals and execution adhere to these standards.

Solicitation / RFP / RFQ

This solicitation is for the construction of a new Whiteriver Hospital, a 407,817 gross square foot facility. The project includes improvements to the existing surface water treatment facility and the construction of two new wastewater treatment package plants. The facility will be technologically advanced and designed to meet the healthcare needs of the American Indian & Alaskan Natives in the Whiteriver Service Unit, incorporating IHS programs and tribally operated health programs. The new facility will offer expanded outpatient, inpatient, primary care, specialty care, ambulatory surgery, emergency, and community health departments, along with ancillary and support services.

• Construction of a new hospital facility, facilities building, chiller plant, and pump house.

• Demolition of existing hospital and other construction activities.

• On-site sitework including underground utilities, earthwork, storm sewer, driveways, sidewalks, curb and gutter, heliport, paving, landscaping, and irrigation.

• Off-site utilities including water, sanitary sewer, drainage, earthwork, surface water treatment plant improvements, and the IHS Hospital Utility Campus (wastewater package treatment plant and water storage tanks).

• Potential for additional work through options, including a whole campus water filtration system, spray fields, circadian lighting, air purification systems, photovoltaic systems, acoustical panels, and off-site sitework for traffic signal and highway improvements.

• Medical equipment procurement and installation.

• Contract Type: Firm-Fixed Price

• Period of Performance: 1095 calendar days from Notice to Proceed.

• Estimated Construction Magnitude: $500,000,000 to $600,000,000.

• Performance Bonds: Required.

• Proposal Due Date: May 12, 2026, 2:00 PM Arizona Time.

• Site Visit: April 8, 2026, 10:00 AM Arizona Time.

• Proposals must be submitted electronically in PDF format.

• Evaluation will be based on a Best Value, Tradeoff approach, considering Technical Experience, Technical Approach/Schedule/Logistics Plan, Key Personnel/Organizational Chart, Past Performance, and Price.

• Unrestricted acquisition, open to both large and small businesses.

• NAICS Code: 236220, Commercial and Institutional Building Construction.

• Size Standard: $45 million.

• Offerors are responsible for all applicable state, local, and Tribal Employment Rights Office (TERO) fees and taxes.

• The solicitation includes numerous attachments detailing specifications, drawings, and other requirements.

Form / Attachment / Pricing Sheet

This document contains the "FINAL CONSTRUCTION DOCUMENTS" for the IHS Whiteriver Hospital project, serving as a comprehensive set of drawings and specifications for architectural, structural, mechanical, plumbing, electrical, and site work. It also includes detailed fire resistance rated assembly systems and specifications for building code compliance related to fire safety, referencing UL design numbers and standards like IBC and NFPA. A LEED scorecard summarizing project progress towards certification is also included.

• Project Scope: Details the construction of a new hospital facility, approximately 407,000 gross square feet, to serve the healthcare needs of the American Indian & Alaskan Natives in the Whiteriver Service Unit.
• Technical Specifications: Includes discipline-specific drawings (architectural, structural, MEP, site work), sheet index, general project information, and code compliance requirements (IBC, NFPA).
• Fire Safety: Outlines fire resistance rating requirements for building elements, specific UL design numbers for approved assemblies, and detailed construction methods. It also addresses hazardous material control areas.
• Sustainability: Features a LEED scorecard indicating progress and potential points for certification.

This document is critical for potential bidders, providing the complete technical specifications and design details necessary for accurate and competitive bidding on the IHS Whiteriver Hospital construction. Bidders, particularly those in structural steel, drywall, fireproofing, and hazardous material handling, must thoroughly review these "FINAL CONSTRUCTION DOCUMENTS" to understand the scope of work, material requirements, construction methods, and compliance standards. The LEED scorecard highlights sustainability goals that may influence material selection and construction practices.

Forms / Attachments / Pricing Sheets

This document contains the Final Construction Documents for the BP2 - IHS Hospital Utility Campus project. It serves as a comprehensive set of drawings and specifications detailing the construction requirements for the wastewater treatment plant and associated site development.

• Project Identification: Includes project name, location, IHS project number (131445), contract number (75H70123R00008), and award date (02/02/2024).
• Sheet Index: Provides a detailed listing of all architectural, civil, electrical, fire alarm, fire protection, ICT, landscape, mechanical, plumbing, and structural drawings included in the set.
• Project General Notes: Outlines overarching requirements, coordination instructions, compliance with codes and regulations, and the precedence of architectural drawings for finished appearance.
• Project Description: Briefly describes the project as a wastewater treatment plant for the Whiteriver Hospital Campus, including a pre-engineered metal building for equipment and service areas, and site development for roadways, drainage, and security fencing.
• Sustainability Statement: Indicates the project is registered under the LEED Green Building Program.
• Fire and Life Safety Information: Details occupancy classifications, fire-resistance ratings, exit strategies, fire protection systems (sprinklers, alarms, extinguishers, fire pump), and interior finish requirements.
• Hazardous Material Information: Specifies the types and quantities of hazardous materials to be stored, including their classifications, storage requirements, and safety measures.

This document is critical for bidders as it contains the detailed technical specifications and drawings required to understand the full scope of work for the construction of the IHS Hospital Utility Campus. It outlines all design requirements, material specifications, safety protocols, and compliance standards that must be adhered to during the construction phase. Bidders will use this document to prepare their bids, understand the project's complexity, and assess their capability to meet all contractual obligations.

Form / Attachment / Pricing Sheet

This document contains the Final Construction Documents for Building Package 3 (BP3) of the Hon-Dah Utility Campus, specifically for the Hon-Dah Wastewater Treatment Plant (WWTP). It details the project's scope, design criteria, and compliance with various building codes and safety standards.

• Project Overview: Construction of a pre-engineered metal building for WWTP equipment and service areas, including site development for roadways, drainage, and security fencing.
• Scope of Work: Detailed plans and specifications across multiple disciplines including Civil, Structural, Architectural, Fire Protection, Plumbing, Mechanical, Electrical, ICT, and Security.
• Code Compliance: Adherence to International Building Code (IBC), International Fire Code (IFC), and National Fire Protection Association (NFPA) standards, with specific attention to occupancy classifications (Business, Industrial, High-Hazard, Storage) and fire-resistance requirements.
• Hazardous Materials: Detailed information on the storage and handling of chemicals such as Sodium Hydroxide, Aluminum Sulfate, Micro C2000, and Sodium Hypochlorite, including containment, ventilation, and emergency alarm systems.
• Life Safety Systems: Outlines requirements for fire alarm systems, automatic sprinkler systems, standpipe systems, portable fire extinguishers, and means of egress.

This document serves as the definitive set of construction documents for the Hon-Dah WWTP project. Bidders will need to review these detailed plans and specifications to understand the full scope of work, technical requirements, material specifications, safety protocols, and compliance obligations to prepare an accurate bid and execute the construction project.

Specifications / Attachment

This document, "B01 Attachment J02b Specs (Vol 2).pdf," is Volume 2 of the Project Manual for the IHS Whiteriver Hospital. It provides detailed technical specifications for construction divisions, outlining requirements for materials, products, and installation to ensure adherence to design intent and quality standards.

• Scope: Encompasses detailed technical specifications for numerous construction divisions, including Openings (08), Finishes (09), Specialties (10), Equipment (11), Furnishings (12), Special Construction (13), Conveying Equipment (14), Fire Suppression (21), Plumbing (22), HVAC (23), Electrical (26), Communications (27), Electronic Safety and Security (28), Earthwork (31), Exterior Improvements (32), Utilities (33), Transportation (34), and various process-related equipment divisions (40-46).
• Content: Includes general requirements, performance criteria, materials, fabrication, and execution details for each division. It also specifies product data, sustainable design submittals (recycled content, EPDs, VOCs), shop drawings, samples, quality assurance (installer qualifications, testing, mockups), delivery, storage, handling, field conditions, and warranty requirements.
• Healthcare Equipment: Specific details are provided for healthcare equipment such as dental delivery systems, surgical lights, X-ray units, anesthesia and equipment booms, dust collectors, and various casework and countertops. Utility requirements (electrical, air, water, drain, ventilation) are detailed for each item.

This document is critical for bidders to accurately prepare proposals by defining the exact technical requirements, performance criteria, and quality standards for all specified components and systems. Bidders must review these specifications to ensure compliance, identify necessary submittals, understand installation procedures, and account for all material and workmanship requirements, including specific warranties and certifications (e.g., NFPA, ASTM, UL, ANSI, BHMA, MPI, NACE, AWWA, NSF). Understanding these details is essential for accurate bidding and proposal preparation.

Forms / Attachments / Pricing Sheets

This document, "B01 Attachment J02d Specs (Vol 4).pdf", comprises Volume 4 of the 100% Construction Documents for the IHS Whiteriver Hospital project. It contains detailed specifications for a wide array of construction divisions. Additionally, it includes a specific product and equipment schedule for "DATA COMMUNICATIONS NETWORK EQUIPMENT" (Section 272100), primarily detailing Cisco Systems components.

Construction Specifications (Divisions 00-34):

• Covers procurement, general requirements, existing conditions, concrete, masonry, metals, wood, thermal/moisture protection, openings, finishes, specialties, equipment, furnishings, special construction, conveying equipment, fire suppression, plumbing, HVAC, integrated automation (Not Applicable), electrical, communications, electronic safety/security, earthwork, exterior improvements, utilities, and transportation.
• Includes detailed requirements for materials, installation, and systems.

Data Communications Network Equipment (Section 272100):

• Specifies acceptable manufacturers, primarily Cisco Systems (CISCOPRO).
• Lists detailed product schedules with part numbers, descriptions, and quantities for Cisco Catalyst 9600 Series and Cisco 8300 Series components.
• Organizes components by Intermediate Distribution Frame (IDF) locations (e.g., MDF-207, IDF-1054).

This document is critical for bidders involved in the IHS Whiteriver Hospital construction. It provides the comprehensive technical specifications for all construction aspects, ensuring work meets required standards. Bidders must thoroughly review these specifications to understand the scope, materials, and procedures. For the data communications section, bidders must ensure their proposals include the specified Cisco components or approved equivalents, paying close attention to the detailed breakdown by IDF location and quantity for accurate pricing and procurement planning.

Form / Attachment / Pricing Sheet

This document, "B01 Attachment J02e Specs (Vol 5).pdf", is a PDF attachment to a SAM.gov opportunity record. It contains the 100% construction documents for the IHS Whiteriver Hospital project, with Project No. 14904.000, dated 5 March 2026.

This document is Volume 5 of the 100% construction documents. It includes a detailed Table of Contents that outlines the various divisions and sections of the specifications, covering procurement and contracting requirements, general requirements, existing conditions, concrete, masonry, metals, wood, plastics, composites, thermal and moisture protection, openings, finishes, specialties, equipment, furnishings, special construction, conveying equipment, fire suppression, plumbing, heating, ventilating, and air-conditioning (HVAC), electrical, integrated automation, electronic safety and security, earthwork, exterior improvements, utilities, transportation, process interconnections, and wastewater treatment equipment.

This document is crucial for bidders as it contains the detailed specifications for the construction of the IHS Whiteriver Hospital. Potential bidders must review this document to understand the full scope of work, material requirements, technical specifications, and any special conditions or compliance obligations related to the construction of the hospital. This information is essential for preparing accurate proposals and determining the feasibility and cost of bidding on the opportunity.

Form / Attachment / Pricing Sheet

This document, "B01 Attachment J02f SWTP Specs (Vol 6).pdf", is Volume 6 of the 100% Construction Documents for the IHS Whiteriver Hospital project. It specifically details the specifications for the Tribally owned and operated surface water treatment plant (SWTP).

• This volume is intended to be a stand-alone specification for the SWTP portion of the larger hospital project.
• It is part of the 100% Construction Documents dated 5 March 2026.
• The document includes detailed specifications across various divisions:
  • Division 26 - Electrical (Sections 260050, 260110, 260120, 260130, 260140, 260195, 260450, 260500)
  • Division 40 - Process Interconnections (Sections 400205, 400510, 400510.03, 400510.12, 400510.13, 400553, 407113, 407553)
  • Division 46 - Water and Wastewater Equipment (Sections 460713, 463344)

This document is crucial for any bidder intending to construct or supply components for the surface water treatment plant. It outlines the specific technical requirements, materials, installation procedures, and quality standards for all electrical, process piping, and water treatment equipment. Bidders must carefully review the relevant sections to ensure their proposals and proposed equipment meet all specified criteria.

Form / Attachment / Pricing Sheet

This document is a General Decision Number (GDN) for building construction projects in Navajo County, Arizona. It provides prevailing wage rates and fringe benefits for various construction trades, as determined by the U.S. Department of Labor. This information is crucial for contractors to understand labor costs and ensure compliance with wage laws on federal or federally-assisted construction projects.

• General Decision Number: AZ20260027, dated 01/30/2026.
• Construction Type: Building Construction, including treatment plants and industrial sites, but excluding single-family homes or apartments up to and including 4 stories.
• Geographic Area: Navajo County, Arizona.
• Trades and Rates: Lists specific wage rates and fringe benefits for trades such as Bricklayer, Carpenter (including Drywall Hanging), Electrician, Power Equipment Operator (Crane), Ironworker, Laborer (various types), Painter, Pipefitter, Plumber, Roofer, Cement Mason/Concrete Finisher, Floor Layer, Glazier, Sheet Metal Worker, Sprinkler Fitter, and Tile Setter.
• Zone Pay: Details additional pay based on radial distance from specific points in Phoenix, AZ, for certain trades.
• Executive Orders: Mentions applicability of Executive Order (EO) 13706 (Paid Sick Leave) and EO 13658 (minimum wage for federal contractors).
• Appeals Process: Outlines the procedure for appealing wage determination decisions.

Bidders must use these prevailing wage rates to accurately estimate labor costs for their proposals. Failure to comply with these wage requirements can lead to contract violations and penalties. The document helps bidders determine the minimum wages they must pay to laborers and mechanics employed on the project.

Form / Attachment / Pricing Sheet

This document is a General Decision Number (GDN) for highway construction projects in Navajo County, Arizona. It specifies the prevailing wage rates and fringe benefits for various labor classifications, as determined by the U.S. Department of Labor. This information is crucial for contractors to understand labor costs and ensure compliance with wage laws when bidding on or performing relevant federal or federally-assisted construction contracts.

• General Decision Number: AZ20260033, dated 01/02/2026.
• Geographic Area: Navajo County, Arizona.
• Construction Type: Highway.
• Labor Classifications & Rates: Lists specific job titles (e.g., Power Equipment Operator, Ironworker, Laborer, Carpenter, Welder) with their corresponding hourly wage rates and fringe benefit amounts.
• Executive Orders: Notes applicability of Executive Order (EO) 13706 (Paid Sick Leave) and EO 13658 (Federal Contractor Minimum Wage), outlining contractor obligations and employee rights.
• Wage Determination Appeals Process: Provides guidance on how to appeal wage determinations.

Bidders must use these prevailing wage rates to accurately estimate labor costs for their proposals. Failure to comply with these wage requirements can lead to contract violations and penalties. The document also highlights important worker protections and contractor obligations related to paid sick leave and minimum wage, which must be factored into project planning and execution.

Form / Attachment / Pricing Sheet

This document is a General Decision Number (GDN) for wage rates applicable to heavy construction projects in Apache, Graham, Greenlee, and Navajo Counties, Arizona. It serves as a prevailing wage determination for federal contracts subject to the Davis-Bacon Act.

• Lists various construction classifications (e.g., Electrician, Power Equipment Operator, Truck Driver, Laborer).
• Provides prevailing hourly wage rates and fringe benefits for each classification.
• Includes effective dates for the listed rates, ranging from June 2025 to January 2026.
• Explains identifiers used for union, survey, and state-adopted rates.
• Outlines the process for appealing wage determinations.
• References Executive Orders 13706 (Paid Sick Leave) and 13658 (Minimum Wage for Federal Contractors) and their applicability.

Bidders must use these wage rates to ensure compliance with federal labor laws when preparing proposals for relevant construction opportunities in the specified Arizona counties. The document details minimum wage and benefit requirements for various trades, impacting labor costs and proposal pricing. It also provides information on paid sick leave and minimum wage requirements under specific Executive Orders.

Form / Attachment / Pricing Sheet

This document is a "COMPANY TECHNICAL EXPERIENCE – CONSTRUCTION FORM" designed to collect information from potential bidders regarding their past construction project experience. Bidders are instructed to use one form per project to demonstrate experience with projects of similar type and scope within the last ten (10) years.

• Type of Project Represented
• Your Firm’s Name
• Name of Project
• Location of Project
• Owner
• General Scope of Construction Project
• Type of Facility (e.g., office building, hospital)
• Size of building (gross square feet, number of stories)
• Your Role (Prime, Joint Venture, Subcontractor) and Work Your Company Self-Performed
• Dollar Value of the Contract
• Extent and Type of Work Subcontracted Out
• Dates Construction: Began, Completed, % Completed
• Your Performance Evaluation by Owner, if known
• Were You Terminated or Assessed Liquidated Damages? (Requires explanation if "Yes")
• Owner’s Point of Contact for Reference (Name, Company, Telephone Number)

This form is crucial for bidders to document their relevant construction experience. It requires detailed information about past projects, including scope, size, contract value, and performance. Completing this form accurately and thoroughly will be necessary to demonstrate the company's capability to undertake projects similar to the one being solicited.

Form / Attachment / Pricing Sheet

This document is a Key Personnel Resume Form required for bidders to provide qualifications for specific key personnel roles on this project. It serves as a template for submitting detailed professional information.

• Your Name and Title
• Your Assignment on this Project
• Name of Your Firm
• Years of Experience (with current firm and other firms)
• Education (Degree(s)/Year/Specialization)
• Active Registration (License number, states, years, type - e.g., P.E., R.A., LEED-AP)
• Specific Experience and Qualifications Relevant to this Project: This section requires a detailed description of experience, including the role of the Key Personnel, project description, dollar value, SF (Square Footage, likely), and date for each listed project to demonstrate relevancy.
• Continuation Sheet: Use if additional space is needed.

Bidders must complete this form accurately and thoroughly for the specified key personnel roles (Prime Contractor’s Project Manager, Project Site Superintendent, Quality Control/Quality Assurance, Safety Officer, and two Key Subcontractor Project Managers). The information provided in these resumes will be crucial for evaluating the qualifications and experience of the proposed project team, directly impacting the assessment of the bidder's capability to successfully execute the contract.

Form / Attachment / Pricing Sheet

This document is a Past Performance Questionnaire (Form PPQ-0) intended to gather feedback on a contractor's performance for a previous contract. Offerors are required to have clients complete this questionnaire and submit it with their proposal. The government reserves the right to verify all information provided.

• Contractor Information: Fields for firm name, CAGE code, address, SAM UEI, contact details, and details about their role (prime, subcontractor, etc.) and the percentage of work performed.
• Contract Information: Details about the specific contract, including number, task order number, contract type, title, location, award and completion dates, original and final prices, and explanations for any differences.
• Project Description: A section for the client to describe the project and its relevance to the current opportunity.
• Client Information: Fields for the client's name, title, contact information, and their role in the project.
• Performance Ratings: A comprehensive rating system (Exceptional, Very Good, Satisfactory, Marginal, Unsatisfactory, Not Applicable) for various aspects of performance, including Quality, Schedule/Timeliness, Customer Satisfaction, Management/Personnel/Labor, Cost/Financial Management, Safety/Security, and General performance.
• Narrative Remarks: A section for detailed comments on strengths, weaknesses, deficiencies, or overall performance.

This form is crucial for bidders as it is a required component for demonstrating past performance. The quality and content of the completed questionnaire, especially the client's ratings and narrative remarks, will directly impact the evaluation of the offeror's past performance and their perceived risk for the current opportunity. Bidders must ensure this form is accurately completed by their clients and submitted as part of their proposal.

Form / Attachment / Pricing Sheet

This document contains the Final Construction Documents for the BP4 - IHS Hospital Pump House project. It includes detailed architectural, structural, mechanical, electrical, plumbing, fire protection, and life safety plans, along with general project information, code summaries, and sustainability statements.

• Project Overview: Details the location (Whiteriver, Arizona), owner (Indian Health Service), and project scope (Pump House).
• Sheet Index: A comprehensive list of all drawings included in the document set, categorized by discipline (General, Architectural, Structural, Plumbing, Mechanical, Electrical, Fire Alarm/Protection, ICT, Security).
• General Project Notes: Outlines overarching requirements, coordination between disciplines, code compliance, and protection of existing work.
• Code Summaries: Provides detailed information on building code compliance, including occupancy classifications, fire-resistance ratings, egress requirements, and hazardous material handling.
• Sustainability Statement: Indicates the project is registered under the LEED Green Building Program.

This document is critical for bidders as it contains the complete construction drawings and specifications. It details all technical requirements, design specifications, and compliance standards necessary to understand the scope of work, prepare accurate bids, and execute the construction of the pump house facility. Bidders must review all sections to ensure a thorough understanding of the project requirements.

Form / Attachment / Pricing Sheet

This document contains construction drawings for the IHS Surface Water Treatment Plant located in Whiteriver, Arizona. It details the design and specifications for various components of the water treatment process, including piping, electrical systems, and equipment.

• Cover Sheet (CW1.00): Project overview, location, sheet index, and contact information.
• General Notes & Abbreviations (CW1.01): Standard engineering notes, abbreviations, and legends for symbols used throughout the drawings.
• Process Flow Diagrams (CW1.02): Simplified process flow of the water treatment plant.
• Plan Views (CW1.03 - CW1.08): Detailed layouts of the surface water treatment plant, including influent piping, effluent piping, chemical feed systems, blowers, and sludge blowdown.
• Details (CW1.20): Specific construction details for various components.
• Electrical Drawings (E-1 - E-11): Site plans, single line diagrams, conduit block diagrams, control schematics, and P&IDs for the electrical and control systems.
• Shop Drawings (CW1.13 - CW1.19): Manufacturer-specific details for key equipment like the Tonka water treatment units.

These drawings are critical for any contractor bidding on or performing work related to the construction or modification of the IHS Surface Water Treatment Plant. They provide the detailed technical specifications, layouts, and requirements necessary for accurate bidding, material procurement, and construction execution. Bidders must carefully review these drawings to understand the scope of work, required materials, installation methods, and integration with existing systems.

Form / Attachment / Pricing Sheet

This document, "B01 Attachment J02c Specs (Vol 3).pdf", is a Project Manual, Volume 3, containing 100% Construction Documents dated 5 March 2026 for the IHS Whiteriver Hospital. It details specifications for various construction divisions and specifically outlines requirements for "Instrumentation and Control for HVAC" systems, including Distributed Digital Control (DDC) system hardware and software, control system software, and sensors/controllers.

• Construction Specifications: Covers divisions from procurement and general requirements to concrete, masonry, metals, wood, finishes, specialties, equipment, fire suppression, plumbing, HVAC, electrical, communications, safety and security, earthwork, exterior improvements, utilities, and more.
• HVAC Instrumentation and Control: Details DDC system hardware (workstations, servers, controllers), control system software (OS, programming, graphics, maintenance management), BACnet compliance (B-AWS, B-BC, B-AAC, B-ASC), and specific controller types.
• Submittals and Warranties: Includes requirements for maintenance material submittals, extended warranties for DDC controllers and BAS components, and instructions for delivery, storage, and handling.
• Quality Assurance: Outlines qualifications for DDC system manufacturers and providers.
• Coordination: Specifies requirements for coordinating sensor locations.

This document is critical for bidders, providing comprehensive technical specifications for the IHS Whiteriver Hospital construction. For HVAC control systems, bidders must adhere to detailed requirements for system architecture (DDC, BACnet), software and hardware configurations, security, alarming, submittals, testing, warranty, and maintenance. Understanding these specifications is essential for preparing compliant and competitive bids.

Form / Attachment / Pricing Sheet

This document, Attachment J10, is a Subcontracting Plan template required for large businesses submitting proposals. It must be completed in accordance with FAR 19.109 and FAR Clause 52.219-9 (Alternate II). The plan will be uploaded into SBCX by the apparent awardee prior to award.

• Plan Type: Bidders must select 'Individual', 'Master (Addendum)', or 'Commercial'. For this contract, an 'Individual' plan is expected.
• Subcontracting Goals: Bidders must fill in dollar ($) and percentage (%) goals for various small business categories (Small Business, Small Disadvantaged Business, Women Owned Small Business, Service Disabled Veteran Owned Small Business, HUBZone) for the base period and each option period. Zero dollars is not acceptable for these categories.
• Project Information: Requires details such as Solicitation/Contract No., Title of Acquisition, Contractor's Name, Period of Performance, and Total Contract Amount.
• Administrator Information: Details for the individual responsible for administering the subcontracting program.
• Methodology: Description of how goals were developed and potential sources identified.
• Reporting & Record Keeping: Assurances of cooperation, submission of reports (ISR, SSR via eSRS), and maintenance of records.
• Good Faith Effort: Assurances of making a good faith effort to acquire from small businesses and providing explanations for failures.
• Timely Payments: Assurances of timely payments to small business subcontractors.

Large business offerors must fully complete and submit this plan as part of their proposal. Failure to include essential information may lead to bid rejection. The plan details the offeror's strategy for subcontracting with small businesses, including specific goals and methodologies. It also outlines reporting and payment assurances. The U.S. Department of Health and Human Services (HHS) provides specific subcontracting goals for FY2024: Small Business (23%), Small Disadvantaged Business (5%), Women Owned Small Business (5%), Service Disabled Veteran Owned Small Business (5%), and HUBZone (5%). Bidders are expected to meet at least these percentages.