WWYK240148-Install Electrical from FAB-T and OPCON, B820 & B829

Statement of Work (SOW) / Performance Work Statement (PWS)

This Statement of Work (SOW) details the requirements for installing electrical systems, including the removal of an existing generator and pad, replacing the pad, and installing underground conduits and components at Tinker Air Force Base, Oklahoma.

• Furnish all materials, labor, plant, tools, transportation, equipment, and testing services.

• Perform a site investigation to verify existing conditions.

• Identify and procure necessary logistical, architectural, and structural work elements.

• Provide complete, fully operating systems ready for government use.

• The work is located in a controlled/restricted area.

• Contractor must ensure employees have current/valid licenses and certifications.

• Personnel must be easily recognizable as contractor employees (e.g., badges).

• Quality control shall be executed in accordance with specification section 01 45 00.00 10.

• Contractor must establish an inspection system and a method for deficiency prevention.

• Maintain records of all required inspections and corrective actions.

• Adhere to health and safety requirements, including Commander's Statement of Safety Intent and OSHA VPP.

• Follow emergency evacuation procedures.

• Report all mishaps promptly.

• Process hazardous materials in accordance with specification section 00 72 00.

• Welding, cutting, or brazing operations must comply with 29 CFR 1910.252.

• Hazardous noise levels must comply with OSHA 29 CFR 1910.95.

• Location: Tinker Air Force Base, Oklahoma.

• Working Hours: Normal duty hours (0700 – 1600 Monday-Friday), with utility outages as an exception. Weekend/holiday work may be authorized to meet the schedule.

• Key Personnel: Project Manager (PM), Quality Control Manager (QCM), Site Safety and Health Officer (SSHO), and Project Superintendent are required, with specific experience and qualifications outlined.

• Subcontractors: Firms performing design must be authorized for engineering/architectural services. All subcontractor firms must be licensed in their specialty.

• Badging: AFMC Form 387 (contractor badges) are required for access to Tinker AFB. Personnel must be badged prior to commencing work.

• Controlled/Restricted Area Access: AF Form 1199C (Secure Area Badge) is required. Escorts are mandatory, and an Entry Access List (EAL) and Vehicle Entry Access List (VEAL) must be submitted 14 days prior to access.

• Foreign Object Debris (FOD) Training: Required for all contractor personnel.

• Environmental Management: Assume asbestos and lead-based paint concerns. Notify CO/COR of any suspect environmental conditions.

• Affirmative Procurement: Includes EPA-designated items (concrete with fly ash/slag, nonpressure pipe).

• Correspondence: All electronic correspondence must follow a standardized subject line naming convention.

• Documentation: Submit documents electronically (optical disk, e-mail, or file transfer service) in accordance with specification section 01 33 00.

• Construction Schedule: Submit a baseline schedule within 10 days of Notice to Proceed (NTP).

• Working Documents: Provide scaled utility plan showing tie-in locations.

• Minimum Guidance Documents: Comply with project documents and current editions of listed publications (UFCs, etc.).

• Submittal Register: Review and submit the register for approval within 10 days of NTP.

• Order of Precedence: Defines the hierarchy of contract documents in case of conflict.

• Record Drawings: Submit working as-built drawings and final record drawings.

• DD Form 1354: Submit for approval 14 days prior to final inspection.

• Attachments: Includes Appointment of Security Representative Letter, Controlled Area Training/Procedures, and Recovered Materials Determination Form.

Form / Attachment / Pricing Sheet

This document contains a series of detailed architectural and engineering drawings for the "Install Electrical from FAB-T and OPCON, B829" project at Tinker Air Force Base. It includes site plans, demolition plans, structural foundation plans, electrical site plans, electrical generator layouts, electrical details, and a one-line diagram.

• General Notes: Provide overarching project requirements, coordination instructions, and safety protocols.
• Vicinity Map: Shows the project location within Tinker AFB.
• Demolition Plans (SD-101): Detail existing electrical and structural components to be removed, including specific equipment like generators, transfer switches, and panels.
• Structural Foundation Plans (S-101, S-501): Illustrate new structural foundation designs, including slab-on-grade details, footings, pilasters, and reinforcement specifications.
• Electrical Site Plans (ED-101, E-101): Depict the layout for both demolition and new electrical work, including conduit runs, disconnects, and generator locations.
• Electrical Generator Layout (E-102): Details the placement and connections for new and existing generators and associated equipment.
• Electrical Details (E-501): Provides specific details for new disconnects, concrete pads, and duct banks.
• One-Line Diagram (E-601): Illustrates the electrical power distribution system, including generators, automatic transfer switches (ATS), panels, and transformers.

These drawings are critical for bidders to understand the physical scope of work, including what needs to be demolished, what new structures and electrical systems are to be installed, and the specific technical requirements for materials, dimensions, and connections. They are essential for accurate bidding, project planning, and execution.

Other / Unclassified

This document is a General Decision Number (GDN) from the U.S. Department of Labor, Wage and Hour Division, outlining prevailing wage rates for various construction-related classifications in Oklahoma County, Oklahoma. It includes specific rates and fringe benefits for trades such as Bricklayers, Carpenters, Electricians, Elevator Mechanics, Ironworkers, Laborers, Painters, Plumbers, Roofers, Sheet Metal Workers, and Welders. The document also details paid holidays and provides information on Executive Orders related to paid sick leave and minimum wage for federal contractors.

This document is crucial for bidders on federal construction contracts in Oklahoma County, Oklahoma. It establishes the minimum wage rates and fringe benefits that must be paid to laborers and mechanics employed on such contracts, as required by the Davis-Bacon Act and related statutes. Bidders must use this information to accurately estimate labor costs and ensure compliance with federal labor laws, which is a critical factor in proposal preparation and contract performance.

Form / Attachment / Pricing Sheet

This document is a Submittal Register for the "Install Electrical from FAB-T and OPCON B829" project. It serves as a log to track submittals required from the contractor, including their description, relevant specification sections, and the required action dates and approvals.

• Submittal Register: Lists various submittals required by the contractor, categorized by specification section (e.g., Preconstruction Submittals, Certificates, Shop Drawings, Product Data, Test Reports).
• Item Submitted: Details the specific item or document to be submitted (e.g., Health and Safety Plan, Baseline Construction Schedule, Concrete Mix Design, Welding Procedures).
• Specification Section: References the relevant section in the project specifications.
• Contractor Action/Approval: Columns for tracking the contractor's submission, government/A/E review, and approval process, including dates and reviewer codes.
• Remarks: Provides additional notes or instructions for specific submittals, such as frequency of submission or specific requirements.

This register is crucial for bidders to understand the full scope of documentation and planning required from the contractor after award. It outlines the types of submittals needed, the specifications they relate to, and the expected timeline for their submission and approval. Bidders should review this to ensure they have the capacity and processes to meet these documentation requirements as part of their overall project execution plan.