YCV-16 REPAIR, MAINTENANCE, AND PRESERVATION, YOKOSUKA, JAPAN

Amendment / Modification

This amendment (0006) to solicitation N6264926RA031 addresses contractor questions regarding the blast work and coating system for the CFAY YCV-16 vessel.

• Paragraphs 4.2.4.4, 4.2.6.3, 4.2.4, 4.2.6, and 4.2.7 of the Statement of Work (SOW).

• The amendment clarifies acceptable materials and processes, potentially impacting how bidders prepare their proposals regarding blast materials and coating systems. No changes to deadlines or submission requirements are indicated.

• Blast Work: Use of ISO standard abrasive blast material, previously used on naval vessels, is acceptable for the blast work described in the SOW.

• Coating System: Lead(Pb)-Free paint materials made in Japan are acceptable if the product has been approved by NAVSEA and meets U.S. Navy standards.

Amendment / Modification

This amendment (0005) to solicitation N6264926RA031 modifies the original solicitation for the repair and maintenance of the vessel/barge CFAY YCV-16. Key changes include:

• Period of Performance (POP): Revised from June 1, 2026 - October 15, 2026.
• Questions & Answers: Addresses contractor questions regarding:
  • Acceptance of a revised POP (June 1 - Oct 15, 2026), which is accepted.
  • Unit pricing for deck plate replacement (9SQFT), with the government estimating 900 SQFT.
  • Unit pricing for pad eye or cleat replacement, which is acceptable.
  • Pricing for touch-up coating (30SQFT per void), which is acceptable.
  • Acceptance of alternative certifications (MSRA, AMPP) for blasting/coating personnel, which is accepted.
• Section A (Solicitation/Contract Form): Modified to clarify that award will be made as a firm-fixed-price job order under an existing Master Agreement for Repair and Alteration of Vessels (MARAV), such as an MSRA or ABR. Firms without an active U.S. Navy MSRA/ABR as a Prime Contractor are ineligible for award. The solicitation is intended only for sources authorized to operate and do business in Japan.
• Section E (Inspection and Acceptance): Modified to update Point of Contact (POC) information for inspection and acceptance at N61054 - COMMANDER FLEET ACT YOKOSUKA.
• Section F (Deliveries or Performance): Modified to update the Period of Performance to June 1, 2026 - October 15, 2026, and updated POC information for deliveries.

• Section A (Solicitation/Contract Form)

• Section E (Inspection and Acceptance)

• Section F (Deliveries or Performance)

• Period of Performance (POP)

• The Period of Performance has been extended. Offerors must acknowledge receipt of this amendment. The deadline for offers remains March 27, 2026, at 10:00 AM Japan Standard Time (JST). Access to the work specification package (Attachment I) requires a request by February 13, 2026, 10:00 am JST.

Amendment / Modification

This amendment (0004) to the solicitation N6264926RA0310004 makes the following changes:

• Extends the solicitation closing date to March 27, 2026, at 10:00 AM Japan Standard Time (JST).

• Revises Section A, paragraph 4.

• Revises Section L, paragraph L-1.0 (B), to extend the due date for submission of questions to March 20, 2026, at 12:00 PM JST.

• Section A, paragraph 4 (Offer Due Date)

• Section L, paragraph L-1.0 (B) (Questions Due Date)

• The proposal due date has been extended to March 27, 2026.

• The deadline for submitting questions has been extended to March 20, 2026.

Amendment / Modification

This amendment (0003) to solicitation N6264926RA031, dated 05 Feb 2026, is issued to respond to contractor questions regarding the YCV-16 vessel.

Key responses include:

• Zinc Anodes: No specific drawings are available for layout. 104 zincs were replaced during the last overhaul.

• Manhole Cover Gaskets: 48 gaskets were replaced during the previous overhaul.

• Lifering/Lifeline Stanchions: Quantities will be confirmed during a ship check.

• Section J - List of Attachments has been modified.

• The SOW (YCV-16 MAINTENANCE AND REPAIR) remains the same, referencing NAVSEA Standard Drawings, Military Standards, Non-Standard Drawings, and Builder's Drawings.

• The amendment does not explicitly state a change to the proposal deadline, but it provides clarifications that may impact proposal preparation.

• Supplementary photos and references related to the questions have been included in Section J and are available via DoD SAFE.

Amendment / Modification

This amendment (0002) to solicitation N6264926RA031, dated 05 Feb 2026, addresses vendor questions and updates the site inspection schedule.

Key changes include:

• Clarification on the application of Critical Coated Areas rules (NSI009-32) to the underwater hull preservation work.

• Confirmation that shifting the dock block is necessary for complete paint application.

• Denial of requests for Government Furnished Material (GFM) for paint and new anodes.

• Acceptance of local OSHA-compliant gas-free inspections by qualified personnel.

• Confirmation that no specific security or patrol is required.

• Statement that lead paint is prohibited by federal law.

• Instruction to treat all gasket removals and handling as potentially asbestos-containing material.

• Acceptance of local safety certifications and testing.

• Direction to refer to drawings for the total preservation area (SF) of Power Tool Cleaning.

• Update to Section L (Site Inspection Schedule) with a ship check date of 5 March 2026.

• SOW (Paragraphs 4.2.4, 3.7)

• Section L (Site Inspection Schedule, L-4.0)

• The site inspection date has been updated. Offerors should note the updated schedule for the ship check. Questions arising from the ship check will be distributed as an amendment.

Amendment / Modification

This amendment (0001) to solicitation N6264926RA031, dated 05 Feb 2026, addresses the following:

• Responds to a contractor question regarding a ship check.

• Incorporates the site inspection schedule into Section L (L-4.0).

• All other information remains unchanged.

• Section L - Instructions, Conditions, & Notices to Offerors or Quoters (specifically L-4.0, Site Inspection/Ship Check)

• Section J - List of Attachments (modified text related to attachments)

• The amendment provides details for scheduling a ship check, including date (26 February 2026), time (13:00 PM JST), and location.

• It clarifies that the ship check is for informational purposes only and is not mandatory.

• Questions arising from the ship check should be submitted in writing and will be distributed as an amendment.

• Offerors are reminded that they must hold an active U.S. Navy MSRA/ABR Agreement by the proposal submission date.

Other / Unclassified

This document is a placeholder page indicating that the PDF viewer may not be able to display the document's content. It provides instructions on how to upgrade to the latest version of Adobe Reader and offers a link for further assistance.

This document does not contain substantive information related to the opportunity itself. It serves as a technical notification for users experiencing display issues with the PDF viewer. Bidders should disregard this page and focus on other provided documents for opportunity details.

Solicitation / RFP / RFQ

This solicitation is for the repair, maintenance, and preservation of the YCV-16 vessel. The work will be performed under a Master Agreement for Repair and Alteration of Vessels (MARAV). Award will be made as a firm fixed-price job order under the applicable MARAV. Firms must possess an active U.S. Navy MSRA/ABR as a Prime Contractor to be eligible for award. The solicitation is intended for sources authorized to do business in Japan.

• Repair, maintenance, and preservation of the YCV-16 vessel.

• Work specifications are detailed in Attachment (I) of Section J.

• Contractor is required to submit an itemized breakdown of the total price proposal using Attachment II.

• Compliance with Occupational and Health Standards for Shipyard Employment (29 CFR 1915).

• Adherence to specific requirements for non-Navy owned cranes and rigging equipment.

• Compliance with cybersecurity requirements (CMMC Level 1).

• Contract Type: Firm Fixed Price (FFP)

• Period of Performance: 1 April 2026 to 15 June 2026

• Place of Performance: Contractor's Facility

• Award will be made in Japanese Yen (JPY); USD amounts are for funding purposes only, using an exchange rate of JPY 150.4415 per USD 1.00.

• Proposal Submission Deadline: 9 March 2026, 10:00 AM Japan Standard Time (JST).

• Access to work specifications (Attachment I) requires a request via email by 13 February 2026, 10:00 AM JST.

• Proposals will be evaluated on a Lowest Price Technically Acceptable (LPTA) basis.

• Evaluation factors: Price, Technical Acceptability, and Past Performance.

• Offerors must have an active U.S. Navy MSRA/ABR to be considered technically acceptable.

• Offerors must be registered in the System for Award Management (SAM).

• Must possess an active U.S. Navy MSRA/ABR.

• Must be authorized to operate and do business in Japan.

• Offers will be evaluated with a 10% price preference for HUBZone small business concerns, unless waived.

• All questions must be submitted in writing via email using Attachment (III) by 27 February 2026, 12:00 PM JST.

• Proposal validity period is 90 days.

• The Government intends to award without discussions but reserves the right to conduct discussions.

Form / Attachment / Pricing Sheet

This document is a Price Proposal Form (Attachment II) for Solicitation No. N6264926RA031. It is intended for bidders to input their proposed pricing for the services outlined in the Statement of Work (SOW).

• Solicitation Number: N6264926RA031
• Ship Name: YCV-16
• Availability/Period of Performance: Statement of Work (SOW) from April 1, 2026, through June 15, 2026.
• CLINs: The form includes a CLIN 0001 for the SOW.
• Pricing Breakdown: The form provides sections for Total Labor (MH), Labor Cost, Material Cost, and Other Direct Costs (ODC), leading to a Proposed Price.
• Detailed CLIN Breakdown: A detailed breakdown by SOW No. is provided, with columns for Proposed Labor (In-House and Sub-Contractor), Material/ODCs, and Proposed Price (JPY).
• Labor Hour Breakdown: Specific labor categories (SFTR, INSL, WELD, SMTL, RGRS, PNTR, ELEC, PFTR, QA, OTHERS) are listed for in-house and sub-contractor labor.
• Material and ODC Breakdown: Sections are included for detailing material and other direct costs.
• Instructions: Notes indicate that values in the Summary tab are linked to other tabs, and manual input is generally not necessary for those linked fields. Offerors are instructed to input data in highlighted cells and insert rows as needed. Bidders must input labor rates and ensure the 'KEY WORK ITEM' column is not empty for totals to display.

This form is critical for bidders to accurately calculate and submit their proposed pricing for the YCV-16 Repair, Maintenance, and Preservation services. Bidders must use this template to detail their labor, material, and other direct costs according to the specified CLINs and SOW requirements. The provided structure guides the submission of cost information, which will be a key component of the proposal evaluation.

Form / Attachment / Pricing Sheet

This document is Attachment III, a Request for Information (RFI) form. It is designed for contractors to submit questions to the government regarding an opportunity. It also includes fields for government use to track technical reviews and changes.

• DATE OF REQUEST: Field for the date the RFI is submitted.
• CONTRACTOR: Field for the contractor's name.
• RFP Number: Pre-filled with 'N6264926RA031'.
• PAGE Number(s): Field for page numbering.
• CONTRACTOR QUESTION(s): The primary section for the contractor to write their questions.
• FOR GOVERNMENT USE ONLY: A section for internal government processing, including fields for Technical Reviewer, Date, TGI NO, SPEC CHG, DWG/REF CHG, RQMTS CHG, MAT'L CHG, and RESPONSE TO CODE 200.

This form is essential for bidders who have questions about the solicitation (RFP Number: N6264926RA031). Bidders should use this RFI form to submit their inquiries to the government. The government will use the designated fields to process and respond to these questions.

Other / Unclassified

This document is a placeholder or error message indicating that the PDF viewer could not display the actual content of the "2.02 Attachment IV_Warranty Tracking Information.pdf". It provides instructions on how to upgrade to the latest version of Adobe Reader to potentially view the document.

This document does not contain substantive information about warranty tracking or any other aspect of the opportunity. Bidders should disregard this placeholder and seek the actual "Warranty Tracking Information" attachment if it is critical for their proposal preparation. The inability to view this attachment may require contacting the contracting officer for access to the correct document.

Form / Attachment / Pricing Sheet

This document is the Quality Assurance Surveillance Plan (QASP) for the YCV-16 Maintenance and Repair contract. It establishes a framework for Government surveillance of all work performed under the contract to ensure compliance with technical, safety, administrative, scheduling, environmental, and security requirements as defined in the Statement of Work (SOW).

• Surveillance Objectives: To ensure full compliance with contract requirements, monitor technical operations (e.g., towing, docking, maintenance, abrasive blasting, painting), confirm administrative functions are maintained, record performance, and provide a consistent method for evaluating overall contract performance.
• Government Roles: Defines responsibilities for the Contracting Officer (CO), Contracting Officer's Representative (COR)/Program Manager (PM), Marine Maintenance Officer (MMO) & Government Docking Observer, and Additional Experts (e.g., Shipyard Competent Persons, Environmental Specialists).
• Performance Standards: Outlines acceptable quality levels for Contractor Quality Assurance Plan and Process Control, Contract Deliverables, and Overall Contract Performance, with specific metrics and surveillance methods.
• Methods of Surveillance: Details on-site inspections and customer feedback mechanisms.
• Evaluation Ratings: Defines criteria for Satisfactory (S), Marginal (M), and Unsatisfactory (U) ratings.
• Documenting Performance: Explains how performance will be documented for contractual actions and past performance reporting.
• Frequency of Measurement: Specifies intervals for performance measurement, including daily/weekly spot checks, monthly meetings, milestone inspections, project completion evaluation, and as-needed assessments.

This QASP details how the Government will monitor and evaluate the contractor's performance. Bidders should review the performance standards, surveillance methods, and evaluation criteria to understand the expected quality and compliance levels required for successful contract execution. It highlights the importance of adhering to the SOW and maintaining high standards in all aspects of work. Note that additional QASP requirements and related details are provided in the Statement of Work (SOW).

Form / Attachment / Pricing Sheet

This document is a "Contract Data Sheet" (Attachment VII) used to collect performance information related to a contract. It appears to be a form for reporting on contract execution and compliance.

• Contractor Name
• Contract Number
• Contract Type (Firm Fixed Price or Other)
• Item/Service Description
• Contract Quantity/Period of Performance
• Customer Name and POC
• Performance Information questions covering delivery schedule, compliance with specifications, modifications, terminations, protests, claims, quality awards, and corrective actions.
• A note indicating that answers marked with an asterisk require an explanatory narrative.

This form is likely used by the government to assess contractor performance. While bidders do not fill this out as part of their proposal, understanding the types of performance metrics and questions asked can provide insight into what aspects of contract performance are important to the government for this opportunity.