YON 305 Cargo Fuel Tank Cleaning

Amendment / Modification

This amendment (0001) to solicitation N6264926Q03030001, dated 04 May 2026, provides information regarding RFIs (Requests for Information).

• Section A - Solicitation/Contract Form: The Purchase Requisition Number has been updated from N6275826PRYN905 to N6264926Q03030001.

• Questions must be submitted via email to the Contracting POC no later than 10:00 (JST) on 25 May 2026.

• Submissions can be in English or a combination of Japanese and English.

• All questions and answers will be shared with all vendors.

Amendment / Modification

This amendment modifies the original solicitation (N6264926Q0303) dated 04 May 2026.

• Section A - Solicitation/Contract Form: The Purchase Requisition Number has been updated from N6275826PRYN905 to N6264926Q03030001.

• The deadline for submitting Questions, Answers, and RFIs (Requests for Information) has been extended to 25-May-2026 at 10:00 JST. RFIs should be submitted via email to the contracting Point of Contact (POC). All RFIs will be posted after this new deadline.

Statement of Work (SOW) / Performance Work Statement (PWS)

This document details the requirements for "ShipAlt YON-0120D for Cargo Pump; accomplish" which involves modifications to a cargo pump, its foundation, and associated piping.

• Location: Pump Room.

• Tasks:

  • Cleaning of bilge areas and piping to a gas/oil-free condition.
  • Ventilation, emptying, cleaning, and maintenance of bilge areas.
  • Provision of portable air-driven bilge pumps, high-pressure pumps, nozzles, and suction hoses.
  • Provision of spill kits for containment.
  • Identification and communication during waste liquid transfer.
  • Inspection of piping and hose alignment.
  • Modification of cargo pump, foundation, and piping.
  • Fabrication of backing rings.
  • Shop hydrostatic testing of fabricated piping.
  • Shaft alignment between the pump and vertical drive.
  • Installation and fitting of new shims and dowel pins.
  • Piping alignment to the pump, ensuring no strain on the pump.
  • Witnessing of operating pressure tests and operational tests.
  • Accomplishment of requirements for new and disturbed surfaces.

• Bilge areas and piping must be cleaned to a gas/oil-free condition in accordance with 29 CFR 1915 Subpart B.

• Marine Chemist certificate submission required.

• Operating pressure test to verify tightness of mechanical joints.

• Operational test of the cargo pump.

• Allowable leakage for operating pressure test: None.

• Anticipated Award Date: 7/1/2026

• POP Start Date: 7/22/2026

• POP End Date: 12/31/2026

• Production Completion Date: 11/18/2026

• Location of Work: SASEBO

• Submission of a legible copy of the Marine Chemist certificate.

• Contractor is required to provide material not specifically listed as Government Furnished Material (GFM).

• Cleaning and gas-free work for specific cargo fuel oil tanks is covered under a separate ICN (38NSC85002_A01).

• References to specific standard items, modifications, and enclosures (A, B, C, D) for detailed requirements and dimensions.

Statement of Work (SOW) / Performance Work Statement (PWS)

This document outlines the requirements for performing cargo fuel tank cleaning and gas-freeing services on the vessel YON-305, CFAS DFSP.

• Task: Accomplish cleaning and gas-freeing of cargo fuel oil tanks.

• Location: Throughout the Fuel Oil Barge.

• Identification: Includes 6 cargo fuel oil tanks with specific capacities:

  • S-1: 25,932 GAL
  • P-1: 25,899 GAL
  • S-2: 34,695 GAL
  • P-2: 34,673 GAL
  • S-3: 26,006 GAL
  • P-3: 26,018 GAL

• Requirements:

  • Open, ventilate, conduct gas free, empty, clean, render dry, and maintain each tank, void, and/or cofferdam.
  • Ventilate harmful vapors, fumes, and mist to the exterior of the vessel.
  • Remove and dispose of waste liquid to a Government-provided conveyance, following specific contact and spill containment procedures.
  • Inspect piping and hose alignment before and periodically during pumping, purging, or flushing.
  • Coordinate fluid off-loading/transferring with the ship's Damage Control Assistant (DCA).
  • Perform a visual inspection of each tank, void, and/or cofferdam for cleanliness prior to final closing, documenting personnel present.
  • Install new gaskets and fasteners for manhole covers.

• Anticipated Award Date: 7/1/2026

• POP Start Date: 7/22/2026

• POP End Date: 12/31/2026

• Production Completion Date: 11/18/2026

• Preparing Activity: SASEBO

• References: Standard Items FY25, and S1620-860100 Rev E, WT & OT Hinged Manhole specifications.

• Government Furnished Material (GFM): None.

• Waste Disposal: Government will provide a waste liquid conveyance.

• Additional Requirements: Refer to ENCLOSURE (T) for detailed cleaning requirements and Local Standard Item 099-901YO for CHT/sewage tanks disinfection requirements for SRF-JRMC Sasebo availabilities.

Solicitation / RFP / RFQ

This document is a Request for Quotation (RFQ) for services related to a cargo pump and cargo fuel tank cleaning/gas freeing. The award will be a Firm-Fixed-Price job order under an existing Master Agreement for Repair and Alteration of Vessels (MARV) in the Japan Region. Specifically, it pertains to "Accomplish SA YON-0120D FOR CARGO PUMP" and "Accomplish CARGO FUEL TANK CLEANING/GAS FREEING."

• Accomplish SA YON-0120D for Cargo Pump.

• Accomplish Cargo Fuel Tank Cleaning/Gas Freeing.

• Compliance with occupational and health standards for shipyard employment (29 CFR 1915).

• Adherence to quality assurance standards and potentially higher-level contract quality requirements.

• Proper handling of Controlled Unclassified Information (CUI) if applicable.

• Compliance with specific requirements for contracts performed in Japan, including historical and cultural resource protection.

• Contract Type: Firm-Fixed-Price job order.

• Period of Performance: July 22, 2026, to December 31, 2026.

• Delivery Location: SRF AND JRMC YOKOSUKA, FPO AP 96349, UNITED STATES.

• Payment will be made via Electronic Funds Transfer (EFT).

• Quotations are due by close of business on June 1, 2026.

• Offerors must possess a current U.S. Navy Master Ship Repair Agreement (MSRA) or Agreement for Boat Repair (ABR) in the Japan Region to be eligible for award. Firms without one may be ineligible unless adequate time exists for Navy to perform an assessment and execute the agreement.

• Proposals must be submitted electronically via e-mail, unless directed otherwise.

• Evaluation will be based on the lowest total price, with the Government determining the most advantageous offer.

• A site visit is scheduled for May 19, 2026, at 9:00 JST. Attendance must be emailed by May 13, 2026.

• This solicitation is restricted to firms possessing a current MSRA/ABR in the Japan Region.

• It is not a small business set-aside.

• The document includes numerous FAR and DFARS clauses covering various aspects such as inspection, acceptance, payment, taxes, and security requirements.

• Offerors are urged to inspect the site where services are to be performed.