Z2DA--695-22-117 CN New Audiology Clinic 5BN

Specifications

This document comprises detailed specifications for the VA Milwaukee Renovate Audiology project, covering a broad spectrum of construction disciplines. It outlines requirements for materials, installation, quality assurance, submittals, and safety protocols across various divisions.

Key areas covered include:

• General Requirements (Division 01): Safety, security, operations, alterations, disposal, restoration, as-built drawings, warranty management, temporary utilities, testing, government-furnished property, and commissioning.
• Existing Conditions (Division 02): Demolition, traditional and glovebag asbestos abatement, and lead-based paint removal.
• Concrete (Division 03): Shotcrete and masonry work.
• Metals (Division 05): Cold-formed metal framing, metal fabrications, and metal stairs.
• Wood, Plastics and Composites (Division 06): Rough and finish carpentry, plastic fabrication.
• Thermal and Moisture Protection (Division 07): Deck covering, insulation, flashing, sheet metal, roof accessories, fireproofing, and firestopping.
• Openings (Division 08): Doors, frames, windows, hardware, glazing, and louvers.
• Finishes (Division 09): Subsurface preparation, non-structural metal framing, gypsum board, ceramic/porcelain tiling, acoustical ceilings, resilient flooring, carpeting, painting, and multicolor finishing.
• Specialties (Division 10): Signage, wall and door protection, toilet/bath/laundry accessories, fire extinguisher cabinets, and lockers.
• Furnishings (Division 12): Window shades, manufactured wood casework, and countertops.
• Special Construction (Division 13): Audiology booths.
• Fire Suppression (Division 21): Commissioning and wet-pipe sprinkler systems.
• Plumbing (Division 22): Valves, insulation, water distribution, sanitary piping, fixtures, and gas systems.
• HVAC (Division 23): Motor requirements, noise control, testing, insulation, commissioning, ducts, fans, and air terminal units.
• Electrical (Division 26): Low-voltage conductors, grounding, raceways, overcurrent devices, lighting controls, transformers, panelboards, and interior lighting.
• Communications (Division 27): Structured cabling, grounding, and raceways.
• Electronic Safety and Security (Division 28): Access control, video surveillance, and fire alarm systems.
• Exterior Improvements (Division 32): Not used.
• Utilities (Division 33): Not used.

Specific sections detail requirements for shop drawings, safety protocols (including accident prevention, PPE, infection control), reference standards, quality control, testing, temporary environmental controls, construction waste management, and sustainable construction.

Potential bidders must thoroughly review all relevant sections to understand the project's scope, material requirements, quality control measures, safety protocols, and submission deadlines. Particular attention should be paid to hazardous material abatement (asbestos, lead-based paint), environmental controls, and waste management. Bidders must ensure compliance with all applicable standards (ASTM, ACI, ANSI, NFPA, OSHA) and carefully follow submittal procedures for shop drawings, product data, samples, and test reports to avoid delays and ensure compliance.

Specifications

This document contains specifications for various construction and installation requirements related to the VA Milwaukee Renovate Audiology project. It is divided into multiple volumes and divisions, detailing requirements for:

Volume One:

• Division 00 - Special Sections: Includes a list of drawing sheets.
• Division 01 - General Requirements: Covers general project requirements, special notes, project schedules, shop drawings, safety, quality control, construction waste management, and commissioning.
• Division 02 - Existing Conditions: Addresses demolition, asbestos abatement, and lead-based paint removal.
• Division 03 - Concrete: Details shotcrete specifications.
• Division 04 - Masonry: Covers masonry maintenance.
• Division 05 - Metals: Includes specifications for metal framing, fabrications, and stairs.
• Division 06 - Wood, Plastics and Composites: Covers plastic fabrication, rough carpentry, and finish carpentry.
• Division 07 - Thermal and Moisture Protection: Details deck covering, insulation, roofing, flashing, sheet metal, roof accessories, fireproofing, and joint sealants.
• Division 08 - Openings: Covers hollow metal and wood doors and frames, integrated door assemblies, access doors, aluminum windows, pass windows, door hardware, glazing, and louvers.
• Division 09 - Finishes: Includes subsurface preparation for floor finishes, non-structural metal framing, gypsum board, ceramic tiling, acoustical ceilings, resilient base and accessories, resilient tile flooring, carpeting, painting, and multicolor interior finishing.
• Division 10 - Specialties: Covers signage, wall and door protection, toilet accessories, fire extinguisher cabinets, and lockers.
• Division 11 - Equipment: Marked as "Not Used."
• Division 12 - Furnishings: Includes window shades, casework, and countertops.
• Division 13 - Special Construction: Details audiology booths.
• Division 14 - Conveying Equipment: Marked as "Not Used."

Volume Two:

• Division 21 - Fire Suppression: Covers commissioning of fire suppression systems and wet-pipe sprinkler systems.
• Division 22 - Plumbing: Details common work results, valves, plumbing fixtures, and plumbing insulation.
• Division 23 - Heating, Ventilating, and Air Conditioning (HVAC): Includes common work results, motor requirements, noise and vibration control, testing and balancing, insulation, commissioning, direct-digital control systems, hydronic piping, ducts and casings, fans, air terminal units, air outlets and inlets, HVAC air cleaning devices, and air coils.
• Division 25 - Integrated Automation: Marked as "Not Used."
• Division 26 - Electrical: Covers requirements for electrical installations, low-voltage power conductors and cables, grounding and bonding, raceways and boxes, transformers, panelboards, lighting controls, and motor controllers.
• Division 27 - Communications: Includes requirements for communications installations, grounding and bonding, raceways and boxes, and structured cabling.
• Division 28 - Electronic Safety and Security: Covers common work results, grounding and bonding, conduits and backboxes, commissioning, and physical access control systems.
• Division 31 - Earthwork: Marked as "Not Used."
• Division 32 - Exterior Improvements: Marked as "Not Used."
• Division 33 - Utilities: Not specified in the table of contents.
• Division 34 - Transportation: Not specified in the table of contents.
• Division 48 - Electrical Power Generation: Not specified in the table of contents.

This document is a comprehensive set of specifications outlining the technical requirements for various building systems. It details materials, installation methods, testing procedures, and quality assurance standards for:

• General Requirements: Project administration, waste management, sustainable construction, and commissioning.
• Existing Conditions: Demolition and abatement.
• Building Systems: Fire suppression, plumbing, HVAC, electrical, communications, electronic safety and security, and utilities.
• Materials and Installation: Specific requirements for piping, ductwork, electrical components, and their installation.

This document serves as a technical specification for contractors. Bidders must adhere to all specified requirements, standards, and referenced publications. Submittals, including shop drawings, product data, and samples, are required for review and approval.

Form / Attachment / Pricing Sheet

This document contains electrical drawings and details for the VA Milwaukee Renovate 111 project, specifically for the Audiology 5BN area. It includes floor plans for lighting, power, and low voltage systems, as well as electrical schedules and details.

• Electrical Plans: Detailed layouts for lighting, power distribution, and low voltage systems (telecom, security, PA) across various floors.
• Electrical Schedules: Information on luminaires, disconnects, transformers, and panelboards.
• Details: Specific installation details for electrical components, cable tray systems, fire-rated penetrations, and low voltage terminations.
• Demolition Plans: Outlines for the removal of existing electrical systems.

This document is crucial for bidders to understand the scope of electrical work required for the renovation project. It details the existing conditions to be modified or removed, the new electrical systems to be installed, and specific requirements for materials, installation methods, and coordination with other trades. Bidders must use these drawings to accurately estimate costs, plan their work, and ensure compliance with project specifications.

Solicitation

This is a solicitation for construction services to renovate Building 111, specifically the Audiology Clinic (5BN), at the Clement J. Zablocki VA Medical Center in Milwaukee, WI. The project involves demolishing existing fixed equipment, architectural walls, ceilings, and MEP systems back to structural elements and connection points. It includes constructing new MEP systems, installing an RTU, and creating multiple clinic rooms, a lab/work room, five sound booths, a patient lobby, staff kitchen, and conference room. Improvements to the building envelope, including new windows, are also required.

• Demolition of existing Audiology Clinic space.

• Construction of new MEP systems, including an RTU.

• Architectural improvements: clinic rooms, lab/work room, sound booths, lobby, kitchen, conference room.

• Building envelope improvements: new windows.

• Extensive infection control measures in adjacent occupied spaces.

• Work may require off-hours or weekend activities due to proximity to occupied areas.

• A cost-loaded, Critical Path Method (CPM) construction schedule is required.

• Compliance with VHA Directive 1192.01 (annual seasonal influenza vaccinations for contractor personnel).

• Project Number: 695-22-117

• Estimated Price Range: $5,000,000.00 to $10,000,000.00

• Performance Period: 450 calendar days after Notice to Proceed.

• NAICS Code: 236220 (Commercial and Institutional Building Construction)

• Small Business Size Standard: $45.0 Million

• Bids are due via email by 1:00 PM CDT on December 4, 2025.

• A virtual public bid opening will be held at 2:00 PM CDT on December 4, 2025.

• Award will be made to the responsible bidder submitting the lowest responsive bid.

• Written questions are due by November 21, 2025, 10:30 AM CDT to Zheily.Ramos@va.gov and Stacy.Hoover2@va.gov.

• A mandatory site visit is scheduled for November 14, 2025, at 10:00 AM CDT.

• This procurement is a 100% set-aside for CVE verified Service-Disabled Veteran-Owned Small Business Firms (SDVOSB).

• Bidders must be certified SDVOSBs listed in the SBA Small Business Search database.

• Failure to include the VAAR 852.219-75 certification will result in a non-responsive bid.

• Bidders must bid on all bid items.

• A bid guarantee of 20% of the bid price (not to exceed $3,000,000) is required.

• Performance and Payment Bonds are required upon award.

• Contractors must submit information regarding their past safety and environmental record and their Experience Modification Rate (EMR).

Form / Attachment / Pricing Sheet

This document is a map of the Clement J. Zablocki VA Medical Center in Milwaukee, Wisconsin. It is intended to provide a visual guide to the facility's layout, including buildings, parking areas, and roads.

• Legend: Identifies different types of buildings (EUL, VA), parking areas (EUL, Visitor, Contractor), and lot numbers.
• Site Map: Depicts the campus with numbered buildings, roads, and designated parking zones.
• Key Locations: Highlights specific areas such as the "Public East Entry," "Contractor Parking," "Visitor Parking," and a "Meet Here" point (inside for bad weather).
• Facility Address: 5000 W National Ave, Building 111, Clement J. Zablocki VA Medical Center, Milwaukee, Wisconsin.

This map is relevant for bidders attending a site visit or needing to navigate the VA Medical Center campus. It specifically indicates the meeting point for the site visit (marked with a red dashed line and "Meet Here") and the "Public East Entry," which may be the designated access point for visitors or contractors. Understanding the facility layout can aid in planning for site visits and logistical considerations for any potential work at the location.

Other / Unclassified

This document is a Justification for Single Source Award for the Department of Veterans Affairs, specifically for the Zablocki Medical Center. It outlines the rationale for procuring door hardware (Sargent 11 Series T-zone cylindrical locksets and Sargent 8200 series Mortise Locksets with Medeco cores) as a single source.

This document is relevant to potential bidders as it explains why a specific vendor is being chosen for the "Renovate Audiology Clinic" project. It details:

• Supplies/Services: Sargent locksets and related hardware.
• Estimated Cost: $21,700.
• Justification for Single Source: The need to maintain the existing security and keying system, the high cost and complexity of integrating a new system, and the fact that "approved equals" are not of equal quality. Market research indicated that other products are inferior and incompatible.
• Contracting Activity: Department of Veterans Affairs, VISN 12, Zablocki Medical Center.
• Acquisition Plan Action ID: 36C252-26-AP-0179.
• Purchase Request Number: 695-26-1-6976-0001.

This information helps bidders understand the context of the procurement and why it may not be open to broad competition.

Forms / Attachments / Pricing Sheets

This document contains detailed architectural and mechanical drawings for the VA Milwaukee Renovate 111 project, specifically for the Audiology 5BN area. These drawings provide the necessary visual information for contractors to understand the scope of work related to HVAC systems, including piping, ventilation, and rooftop unit details.

• Floor Plans: Detailed layouts for the 4th and 5th floors, including piping and ventilation systems.
• Roof Plans: Plans for the 5th-floor roof showing mechanical equipment and piping.
• Mechanical Details: Enlarged sections and specific details for HVAC components, ductwork construction, pipe hangers, and terminal air boxes (TABs).
• HVAC Diagrams: Control sequences and diagrams for packaged rooftop units (RTUs) and TABs, illustrating system operations and interlocks.
• Schedules and Notes: Specific notes and schedules related to mechanical scope, piping, and ventilation.

These drawings are critical for bidders to accurately assess the scope of work for the mechanical and HVAC aspects of the renovation project. They detail the existing systems to be modified or removed, and the proposed new installations, including specific equipment, routing, and control strategies. Bidders must carefully review these drawings to develop a comprehensive and accurate proposal.

Form / Attachment / Pricing Sheet

This document is VAAR 852.219-75, a "VA Notice of Limitations on Subcontracting - Certificate of Compliance for Services and Construction" (JAN 2023) (DEVIATION). It requires offerors to certify their compliance with subcontracting limitations if awarded a contract. This is a mandatory form for offerors.

• Services Contracts: Offerors must certify that they will not pay more than 50% of the contract amount to firms not certified as SDVOSBs or VOSBs.
• General Construction Contracts: Offerors must certify that they will not pay more than 85% of the contract amount to firms not certified as SDVOSBs or VOSBs.
• Special Trade Construction Contractors: Offerors must certify that they will not pay more than 75% of the contract amount to firms not certified as SDVOSBs or VOSBs.
• Certification: The offeror must complete, sign, and return this certification with their bid, quotation, or proposal.
• Consequences of Non-Compliance: Failure to provide the certification will result in the offer being deemed ineligible for evaluation and award. False certifications can lead to criminal, civil, or administrative penalties.

This is a required document that must be completed and submitted with an offer. Bidders must understand the specific subcontracting limitations applicable to their contract type (services, general construction, or special trade construction) and ensure their proposed approach complies. Failure to submit this completed form will lead to disqualification.

Other / Unclassified

This document is a "Justification for Single Source Awards" for a fire alarm system upgrade at the Clement J. Zablocki VA Medical Center. It outlines the need for a single-source award due to the requirement to integrate with the existing campus-wide Siemens Cerberus Pyrotronics fire alarm system. The estimated cost for this acquisition is $18,085.

This document indicates that the Department of Veterans Affairs is procuring a fire alarm system component that must be compatible with their existing infrastructure. Bidders offering fire alarm systems should note the specific requirement for seamless integration with the Siemens Cerberus Pyrotronics system. The justification highlights that no other system can integrate with the current fire protection system, implying a need for specialized knowledge or proprietary components. This information is crucial for vendors to determine if they can meet the unique integration requirements for this opportunity.

Form / Attachment / Pricing Sheet

This document is a General Decision Number (GDN) for wage determinations applicable to building construction projects in specific Wisconsin counties. It outlines the minimum wage rates and fringe benefits that must be paid to various laborers and mechanics employed on federal or federally funded construction projects in the specified geographic area.

• Applicable Area: Milwaukee, Ozaukee, Washington, and Waukesha Counties in Wisconsin.
• Project Type: Building construction projects (excluding residential construction up to and including 4 stories).
• Wage Rates: Lists specific hourly wage rates and fringe benefits for numerous job classifications (e.g., Asbestos Removal Worker, Boilermaker, Bricklayer, Carpenter, Electrician, Laborer, Painter, Plumber, Sheet Metal Worker, Truck Driver, etc.).
• Executive Orders: References Executive Orders 14026 and 13658 regarding minimum wage requirements for federal contractors.
• Modifications: Includes a history of modifications to the wage determination, with the latest modification dated 09/05/2025.

Bidders must use this wage determination to understand the labor costs associated with performing the work described in the solicitation. The specified wage rates and fringe benefits are mandatory for compliance with federal labor laws on covered contracts. Failure to adhere to these rates can result in penalties. Bidders should factor these costs into their proposals.

Solicitation / RFP / RFQ

This document is a Justification for Single Source Award for the Department of Veterans Affairs, specifically for the Great Lakes Acquisition Center. It seeks to procure supplies/services for the expansion of the Jeron Health Care Call System Provider 790 Nurse Call System at the Clement J. Zablocki VA Medical Center in Milwaukee, WI. The estimated cost is $29,000.00.

• Expansion of the existing Jeron Nurse Call System.

• Modification of the current system, not a new installation.

• Seamless integration with the existing head end equipment in Building 111.

• The award is for a single source, over the micro-purchase threshold but not exceeding the SAT ($250K).

• The justification is made under FAR 13.106-1.

This document is a justification for a sole-source award, not a solicitation requiring proposal submissions. The justification is approved by the Contracting Officer.

This is a sole-source justification, indicating no set-aside is applicable.

• The unique characteristic limiting this to a single source is the need to interface with the existing Jeron Nurse Call System backbone, making other systems incompatible and prohibitively expensive to install.
• Market research was not conducted because no other system offers seamless integration with the existing Nurse Call system.

Form / Attachment / Pricing Sheet

This document contains detailed drawings and specifications for the fire alarm and sprinkler systems related to the VA Milwaukee Renovation Project (Opportunity Number 695-22-117). It includes general notes, installation details, and specific plans for fire alarm and sprinkler systems on the fifth floor.

• Fire Alarm System: Details installation requirements, component specifications (Siemens compatible), wiring standards (NFPA 70, NFPA 72), mounting heights for devices, and coordination with existing systems. It also specifies requirements for duct smoke detectors and pull stations.
• Fire Sprinkler System: Outlines requirements for a wet-pipe sprinkler system, including adherence to NFPA 13 and VA Design Manual. It specifies pipe types, sprinkler head requirements (FM approved, quick response), spacing, hazard categories, water demand, and fire pump information. It also details installation requirements for audiology booths and fire-rated assembly penetrations.
• Demolition Plans: Includes plans for the demolition of existing fire alarm and sprinkler systems in specific areas.
• General Notes: Covers project-wide requirements such as submittal processes, coordination with other trades, warranty information, and adherence to codes and standards.

This document is critical for bidders to understand the scope of work related to fire protection systems. It provides the technical specifications, design requirements, and layout plans necessary for accurate bidding and execution of the fire alarm and sprinkler system installations and modifications. Bidders must review these drawings and notes to ensure compliance with all specified codes, standards, and project-specific requirements.

Forms / Attachments / Pricing Sheets

This document contains detailed furniture plans and parts lists for the "VA MILWAUKEE RENOVATE 111 695-22-117 AUDIOLOGY 5BN" project. It specifies the layout, elevations, and components of the furniture to be installed in various rooms, including exam rooms, sound booths, control rooms, and lab/repair areas.

• Overall Furniture Plans (Sheets AF105, AF301, AF302, AF303): Floor plans illustrating the placement of furniture within different room types.
• Furniture Elevations (Sheets AF300, AF301, AF302, AF303): Detailed views of furniture configurations from various angles.
• Parts Lists (Sheets AF300, AF301, AF302, AF303): Comprehensive lists of part numbers, descriptions, and quantities for each furniture item, with the basis of design specified as Herman Miller.
• General Furniture Notes: Includes information on the basis of design (Herman Miller) and specifications for solid surface countertops (Mora Corian Savannah).
• Furniture Construction Details (Sheet AF400): Notes and diagrams related to the construction and plumbing aspects of the furniture, particularly for ADA sink modules.

This document is crucial for bidders involved in the furniture procurement and installation phase of the project. It provides the exact specifications and layout required for the furniture, enabling accurate bidding and ensuring compliance with the project's design intent. Bidders must carefully review the plans and parts lists to understand the scope of work related to furniture supply and installation.

Other / Unclassified

This document is a "Single Source Justification for SAP under the SAT" (Simplified Acquisition Procedures under the SAT) for the Department of Veterans Affairs. It outlines the rationale for procuring supplies or services from a single source, specifically for the "Johnson Controls Metasys Building Automation and HVAC Control System" at the Zablocki Medical Center in Milwaukee, WI.

This document is relevant to potential bidders as it explains why a specific system (Johnson Controls Metasys) is being procured on a single-source basis. Key points include:

• Procurement Details: The acquisition is for the installation of a new panel and controllers to be integrated with the existing Johnson Controls Metasys Building Automation and HVAC Control System. The estimated cost is $119,435.
• Sole Source Rationale: The justification states that the Johnson Controls Metasys system is the only product that allows for a single, campus-wide HVAC control system. Using a different system would require significant additional costs for new hardware, software, and programming, and could lead to compatibility issues, increased maintenance, and staff unfamiliarity.
• Market Research: Limited market research was conducted, concluding that other systems are not compatible and would incur additional maintenance costs.
• Contracting Activity: Department of Veterans Affairs, VISN 12, Zablocki Medical Center.

This justification indicates that the opportunity is not open for competitive bidding due to the unique characteristics of the existing system and the associated costs and risks of introducing an alternative.

Forms / Attachments / Pricing Sheets

This document contains detailed architectural and engineering drawings for the VA Milwaukee Renovate 111 project, specifically for the Audiology 5BN department. It includes floor plans, enlarged equipment plans, sound booth plans, casework details, interior finish keys, and various construction details.

• Floor Plans (Sheets A1405, ID105): Show layouts of rooms such as exam rooms, staff toilets, lab/repair areas, waiting areas, break rooms, sound booths, and control rooms.
• Equipment Plans (Sheet A1405): Detail the placement of specific equipment within rooms.
• Sound Booth Plans (Sheet A1407): Illustrate the design and layout of sound booths and control rooms.
• Casework Details (Sheets A1520, A1521): Provide specific construction details for counters, desks, shelves, and sink base units.
• Interior Finish Key & Details (Sheets ID001, ID105, ID106, ID107, ID207): Specify materials, colors, and finishes for floors, walls, ceilings, casework, signage, and other interior elements.
• Construction Details (Sheet ID001): Show specific construction methods for transitions, wall protection, and mounting systems.

These drawings are critical for bidders to understand the physical scope of work, material specifications, and construction requirements for the renovation project. They provide the detailed information necessary for accurate bidding, material procurement, and construction execution. Bidders must carefully review these drawings to ensure they can meet all specified requirements for finishes, equipment, casework, and overall construction.

Form / Attachment / Pricing Sheet

This document contains architectural drawings, including exterior elevations, building sections, ceiling details, wall sections, enlarged plan details, and wall types. It provides detailed visual information for the "VA MILWAUKEE RENOVATE 111 695-22-117 AUDIOLOGY 5BN" project.

• Exterior Elevations (AE200): Shows the west, south, and north elevations of the building.
• Building Sections (AE300-AE302): Illustrates various vertical cross-sections of the building, detailing floor levels, wall constructions, and interior layouts.
• Ceiling Details (AE320): Provides specific details for ceiling transitions and bulkheads.
• Wall Sections (AE321): Details exterior wall construction, window installations, and demolition sections.
• Enlarged Plan Details (AE322): Offers close-up views of specific areas like sound booth corners, chases, and reception areas.
• Wall Types (AE600): Defines various interior and exterior wall constructions, including their stud sizes, fire ratings, and sound attenuation.
• Door and Frame Schedule (AE601): Lists door types, sizes, materials, fire ratings, and associated hardware.
• Window Schedule: Details window types, sizes, and materials.

These drawings are critical for bidders to understand the physical scope of the renovation, including new construction, modifications to existing structures, material specifications, and detailed construction methods. They are essential for accurate bidding, material procurement, and construction planning.

Form / Attachment / Pricing Sheet

This document contains architectural drawings, specifically focusing on infection control plans and demolition plans for various floors of a facility. It details the layout, construction requirements, and phasing for renovation and construction activities.

• Infection Control Plans (ICPs): Outlines measures to prevent the spread of infection during construction, including temporary barriers, negative air pressure, dust control, and personal protective equipment.
• Demolition Plans: Shows areas designated for demolition and provides notes on removal procedures, waste disposal, and site safety.
• Floor Plans: Illustrates the layout of different floors, including room designations, walls, doors, windows, and other architectural features.
• Reflected Ceiling Plans: Details ceiling types, lighting, sprinkler heads, and air diffusers.
• Details: Provides specific construction details for elements like raised floors, ramps, stair access, and equipment platforms.
• Phasing: Indicates different phases of construction and demolition work.

These drawings are critical for bidders to understand the scope of work, the physical environment of the project, and the specific requirements for infection control and demolition. They provide the detailed visual information necessary for accurate bidding, project planning, and execution of the renovation and construction tasks.

Forms / Attachments / Pricing Sheets

This document contains architectural and engineering drawings related to the VA Milwaukee Renovation project, specifically for the Audiology 5BN area. It includes detailed plans for plumbing, medical gas, and pneumatic tube systems across various floors (4th, 5th, and Roof), as well as riser diagrams and a medical gas coversheet.

• Floor Plans: Detailed layouts for the 4th, 5th, and Roof levels, illustrating plumbing (demolition and new work), medical gas systems, and pneumatic tube systems.
• Riser Diagrams: Schematics for domestic water, sanitary/vent, medical gas, and pneumatic tube communication systems.
• Symbol and Legend Keys: Explanations of symbols used for plumbing, medical gas, pneumatic tubes, and fire/smoke barriers.
• General and Keyed Notes: Specific instructions and requirements related to demolition, installation, phasing, and existing conditions.
• Project Information: Includes project title (VA MILWAUKEE RENOVATE 111 695-22-117 AUDIOLOGY 5BN), project number, building number, and location.

These drawings are critical for bidders to understand the scope of work, including demolition and new installations for plumbing, medical gas, and pneumatic tube systems. They provide the necessary technical details for accurate bidding, material selection, and execution of the renovation project. Bidders must carefully review these plans to identify all requirements, existing conditions, and specific notes pertaining to their scope of work.