C2 Cross Functional Team (CFT) Broad Agency Announcement

Solicitation / RFP / RFQ

This document is a White Paper Call (Call #0002) under Broad Agency Announcement (BAA) BAA-25-R-C2CFT, Topic #N2104, concerning "Command Post Mobility/Survivability." The U.S. Army PEO C3N is seeking white papers for basic research, applied research, and development (not hardware procurement) related to improving current Command Post (CP) and On-the-Move (OTM) communication systems. The goal is to develop a low-profile, multi-band, agile, modular, and scalable antenna system with integrated High-Power Amplifier (HPA) functionality to address limitations in current systems, particularly in high-vegetation or concealed environments and during armored platform operations.

• Frequency Support: Operates across HF, VHF, UHF, L/S/C bands, and 5G Low/Mid/High bands (mmWave).

• Power Output: Adjustable from 0.5W up to 100W.

• Mounting: Quick mount/dismount capability for rapid deployment.

• Waveform Adaptability: Support for current Army Program of Record (PoR) and 5G (Objective).

• System Integration: Fully compatible with CMOSS architecture and Software Defined Radio (SDR).

• Key Features: Full-spectrum operation, simultaneous multi-frequency transmission/reception, tunable matching networks, frequency-agile antenna elements, real-time dynamic reconfiguration, interchangeable/stackable HPA modules, software control for power management, lightweight/low-profile antenna construction, robust mechanical/electrical interfaces, and compact design for integration with CMOSS and SDR systems.

• Deliverable: White Papers (max 8 pages), followed by a potential technological demonstration and prototype development (up to 12-month base period) with a Safety Assessment Report (SAR) and training.

• Contract Type: Instrument best suited to research nature.

• Period of Performance: One (1) up to 12-month base period and one up to 12-month option period (option not guaranteed).

• Estimated Value: Not specified; funding is subject to availability.

• Submission: White Papers (WPs) submitted via Joint Tactical Networking Center (JTNC) Joint Communications Marketplace (JCM) Technical Exchange Meeting (TEM) Industry Community.

• Evaluation: Two-part process:

  • Part One (Go/No-Go): Evaluates Cost (ROM estimate), Technology Readiness Level (TRL 6 or higher), Schedule (not-to-exceed 24 months), and compliance with BAA requirements.
  • Part Two (Descending Order of Importance): Importance to Agency Programs, Technical Merit/Challenge, and Schedule.

• Key Deadlines:

  • WP Submission Opens: 07 July 2025
  • WP Submission Closes: 25 July 2025
  • Government begins notifying Vendors of WP evaluations: 29 August 2025
  • Technological Demonstration: 08-12 September 2025
  • Government begins notifying Vendors of demonstration results: 03 October 2025
  • Government begins accepting proposals: 14 October 2025
  • Government begins notifying Vendors selected for award: 17 November 2025

• Not specified.

• This is a two-step BAA process. Offerors must submit a white paper first; submitting a proposal without a white paper will result in ineligibility for award.

• The Government may skip the technological demonstration step.

• Vendors should monitor SAM.gov and the JTNC JCM for amendments and Q&As.

• A rapid award schedule is prioritized.

Solicitation / RFP / RFQ

This document is a White Paper Call (Call #0001) under Broad Agency Announcement (BAA) BAA-25-R-C2CFT, Topic #N2101 Unified Network. The U.S. Army Program Executive Office Command Control Communications, and Network (PEO C3N) is seeking white papers for a "Waveform Agnostic, Software Defined Bridging Solution." The objective is to address critical communication challenges faced by the Army, including interoperability issues across disparate networks and proprietary radio waveforms. The solution aims to bridge analog voice, digital voice, and IP data seamlessly, enhancing mission flexibility and transport diversity.

• A software-based solution deployed on a low Size, Weight, and Power (SWaP) Soldier-worn hardware form factor.

• No less than 5 prototypes to be delivered, including software licenses.

• Support for analog-to-digital and digital-to-analog conversion, and digital vocoders.

• Bridging between disparate waveform vocoders and traffic classification levels.

• Advanced traffic filtering for network capacity and Quality of Service (QoS).

• No requirement for a centralized server to bridge voice capabilities.

• Operation on minimal compute/network overhead, ensuring scalability and adaptability.

• A graphic user interface for End User Devices (EUD) and/or Tablets.

• Support for bridging at least 2 radios/networks (desired waveforms include TSM, MN-MIMO, WaveRelay, 3GPP+ family, and SINCGARS).

• Program management activities, including Technical Exchange Meetings, Integrated Master Schedule, etc.

• Two-step process: Phase One (White Paper Submission) and Phase Two (Technological Demonstration and Proposal Submission, by invitation only).

• The Government may skip the technological demonstration step.

• Base Period: Design and Build a Prototype (Up to 12 Months).

• Option Period: Follow-On Training and Experimentation (Up to 12 Months).

• Period of Performance: One (1) up to 12-month base period and one up to 12-month option period.

• White Papers (WPs) are due by 25 July 2025.

• WPs must be submitted via the Joint Tactical Networking Center (JTNC) Joint Communications Marketplace (JCM) Technical Exchange Meeting (TEM) Industry Community.

• WP submission shall not exceed eight (8) pages.

• Technology Readiness Level (TRL) must be 6 or higher.

• Evaluation is a two-part process: "Go" or "No-Go" criteria (Cost, TRL, Schedule, Compliance) followed by evaluation factors (Importance to Agency Programs, Technical Merit/Challenge, Schedule).

• Selected offerors will be expected to respond to proposal requests with a short turnaround time.

• Not specified in this document; refer to the overarching BAA.

• This is a call for WPs only; offerors submitting a proposal without first submitting a WP will not be eligible for award.

• The Government reserves the right to award as many (or as few) contracts as it deems appropriate.

• Non-Government advisors may be involved in the evaluation process; firms identified as advisors are prohibited from competing.

Form / Attachment / Pricing Sheet

This document, titled "BAA Compliance Checklist-Rev5.pdf", outlines the formatting and content requirements for proposals submitted in response to a Broad Agency Announcement (BAA). It serves as a checklist to ensure offerors meet all specified criteria.

• Formatting: Times New Roman 10pt (or larger), single-spaced, single-sided, 8.5x11 inches, 1-inch margins. Smaller font is permissible in figures/tables if legible.
• Page Limit: Eight (8) pages, excluding cover and certification pages.
• Data Restriction: No classified data should be submitted.
• Section 1: Cover Page: Must include Call for WP number, "Technology Area of Interest," Offeror name, Primary Point of Contact (POC) information, TRL 6+ by end of base year, Period of Performance (12-month base + 12-month option), Total ROM, and Submission Date.
• Section 2: Technical Description: Must include Importance to Mission/Agency Program, Technical Approach, and Schedule and Deliverables.
• Section 3: Cost: Must include ROM cost broken out by Base and Option, by cost elements (labor, material, etc.), and a supporting narrative.
• Section 4: Affirmation of Business Status Certification: Must be included.

This checklist is critical for bidders to ensure their proposals are compliant with all submission requirements. Failure to adhere to these formatting and content guidelines may impact proposal evaluation and the determination of best value.

Solicitation / RFP / RFQ

This document is a White Paper Call (Call #0003) under Broad Agency Announcement (BAA) BAA-25-R-C2CFT, Topic # N2102 - Common Operating Environment. It seeks White Papers (WPs) for Operational Modeling Capabilities/Tools to enable survivable, interoperable, and continuously accessible Operational Modeling Tools (OMT) within the Next Generation Command and Control (NGC2) environment. The goal is to enhance decision-making effectiveness across Warfighting Functions, optimize the Military Decision-Making Process (MDMP), and maintain operational tempo during Large-Scale Combat Operations (LSCO) in complex, Multi-Domain Operational (MDO) environments.

• The Army seeks OMTs for seamless integration within the NGC2 platform, employing advanced, data-centric methods to consume and produce actionable information.

• Solutions should integrate top-down strategic and bottom-up tactical data streams for real-time situational awareness.

• Essential requirements include transparent analytic capability with algorithm validation, comprehensive logging of validation metrics, and clearly communicated confidence intervals for proposed Courses of Action (COAs).

• Key capabilities sought include adaptive operational planning, real-time monitoring, dynamic alerting, adversary COA analysis, AI-enabled decision support, integration of staff estimates with sensor data, accelerated COA refinement, coordinated planning for multi-domain effects, and model observability for transparency and reliability.

• Proposed technologies must be at Technology Readiness Level (TRL) 6 or higher.

• The end state should be demonstration/proof-of-concept systems for field testing.

• The contract will have a base period of up to 12 months and an option period of up to 12 months. The option period is not guaranteed and is subject to funding availability.

• The Government reserves the right to award the instrument best suited to the nature of research proposed.

• This is a two-step process: Step One (White Papers) and Step Two (Technological Demonstration and Proposal Submission, by invitation only).

• White Papers (WPs) are due by 25 July 2025.

• WP submission is via the JTNC Joint Communications Marketplace (JCM) Technical Exchange Meeting (TEM) Industry Community.

• WPs will be evaluated using "Go" or "No-Go" gate criteria (Cost, TRL, Schedule, and compliance with BAA requirements) followed by evaluation factors: Importance to Agency Programs, Technical Merit/Challenge, and Schedule.

• Selected offerors will be invited to a technological demonstration (08-12 September 2025).

• Selected offerors from the demonstration will be invited to submit proposals.

• The Government may skip the technological demonstration step and proceed directly to proposal requests.

• This call is for WPs only; offerors submitting a proposal without first submitting a WP will not be eligible for award.

• The technology readiness level must be TRL 6 or higher.

• The submitted white paper shall not exceed eight (8) pages.

• Offerors must identify any current ongoing same/similar efforts.

• The Government reserves the right to select all, part, or none of the WPs received, subject to funding availability.

• Selected offerors may be expected to respond to proposal requests with a short turnaround time.

Solicitation / RFP / RFQ

This document is a White Paper Call (Call #0001) under Broad Agency Announcement (BAA) BAA-25-R-C2CFT, Topic #N2101 Unified Network. The U.S. Army Program Executive Office Command Control Communications- Network (PEO C3N), supporting Network Modernization priorities, is seeking white papers for basic research, applied research, and/or development not related to specific system or hardware procurement. The goal is to address critical Army communication challenges, including interoperability among proprietary radio waveforms and non-standardized voice encoding across disparate networks, by developing a software-based, hardware-agnostic bridging solution to enhance transport diversity and seamless integration of new waveforms. This effort supports Next Generation Command and Control (NGC2) priorities.

• Develop a prototype solution that provides seamless digital, analog voice, and IP data bridging across multiple tactical networks.

• The prototype must be software/hardware-based, supporting analog voice conversion and digital vocoders.

• It must bridge disparate waveform vocoders and resolve disparate data Information Exchange Requirements (IERs).

• Advanced traffic filtering for network capacity and quality of service management is required.

• A group chat management control function is needed.

• The solution must operate on minimal compute resources, be scalable, configurable, and adaptable for dismounted and mounted environments.

• Non-proprietary hardware configurations are required.

• The prototype must support bridging of at least two radios/networks.

• No less than 10 prototypes shall be delivered.

• A Safety Assessment Report (SAR) must be delivered with the prototype.

• Training for Government personnel on the prototype is required.

• The contract will have a base period of up to 12 months (Design and Build a Prototype) and an option period of up to 12 months (Follow-On Training and Experimentation).

• The option period is not guaranteed and is subject to funding availability.

• The Government reserves the right to award as many or as few contracts as it deems appropriate.

• This is a two-step process: Step One is the submission of White Papers (WPs). Step Two, if invited, is a Technological Demonstration, followed by a Proposal Submission.

• White Papers are due by a date to be determined (TBD).

• WP Submission Instructions: Detailed format and content instructions are in Section B of the baseline BAA.

• WP Evaluation Criteria:

  • Part One (Go/No-Go): Evaluated on Cost (ROM), Technology Readiness Level (TRL) (minimum TRL 6 required), Schedule (not-to-exceed 24 months total), and compliance with all submission requirements.
  • Part Two (Descending Order of Importance): Importance to Agency Programs (Relevance/Impact), Technical Merit/Challenge (Innovation, Feasibility, Risk Mitigation, Maturity), and Schedule (Reasonableness).

• Technological Demonstration: A prototype sample will be presented by selected offerors to showcase proposed characteristics. This is a 45-minute evaluation.

• Not specified in this document.

• Offerors must submit a WP to be eligible for award; submitting a proposal without a WP will result in ineligibility.

• The Government may skip Step Two of Phase One and proceed directly to Phase Two after WP evaluations.

• Offerors should monitor sam.gov and the JTNC JCM TEM Industry Community for call amendments.

• If conflicting information exists, this call takes precedence over the baseline BAA.

Solicitation / RFP / RFQ

This document is a White Paper (WP) Call (Call #0003) under Broad Agency Announcement (BAA) BAA-25-R-C2CFT, Topic # N2102: Common Operating Environment. The U.S. Army Program Executive Office Command Control Communications-Network (PEO C3N), supporting the Army Futures Command (AFC) modernization priorities, is seeking innovative Operational Modeling Tools (OMT) to enhance decision-making within the Next Generation Command and Control (NGC2) environment. The goal is to enable survivable, interoperable, and continuously accessible OMTs that optimize the Military Decision-Making Process (MDMP) and support Large-Scale Combat Operations (LSCO) in Multi-Domain Operational (MDO) environments.

• Operational Modeling Tools (OMT): Must integrate with the NGC2 platform, employ advanced data-centric methods, and efficiently consume/produce actionable information.

• Capabilities: Adaptive operational planning, real-time monitoring, dynamic alerting, advanced adversary course-of-action (COA) analysis and modeling, AI-enabled decision support, integration of staff estimates with real-time sensor data, accelerated development/refinement/validation of friendly COAs, coordinated planning for multi-domain effects, and model observability for transparency and reliability.

• Technology Readiness Level (TRL): Proposed technology must be at TRL 6 or higher.

• End State: A set of demonstration/proof-of-concept systems testable in a field environment.

• Contract Type: The Army may elect to award the instrument best suited to the research proposed.

• Period of Performance: One (1) up to 12-month base period and one (1) up to 12-month option period. The option period is not guaranteed and is subject to funding availability.

• Prototype Development: Base period involves designing and building a prototype, delivering a Safety Assessment Report (SAR), and providing training for operational assessment.

• Follow-On: Option period includes follow-on training and experimentation with an equipped Army unit, user/training manuals, and technical support.

• Process: Two-step process: Phase One (Step One: White Papers), Step Two (Technological Demonstration by Invitation Only), Phase Two (Submission of Proposals by Invitation Only).

• White Paper Submission: Via Joint Tactical Networking Center (JTNC) Joint Communications Marketplace (JCM) Technical Exchange Meeting (TEM) Industry Community. Maximum of eight (8) pages.

• Evaluation Criteria (White Papers):

  • Part One (Go/No-Go): Compliance with Cost (ROM estimate), TRL (minimum TRL 6), Schedule (Not-to-Exceed 24 months total, with base/option periods not exceeding 12 months each), and all white paper submission requirements.
  • Part Two (Descending Order of Importance): Importance to Agency Programs (Relevance/Impact), Technical Merit/Challenge (Innovation, Feasibility, Risk, Maturity), and Schedule (Reasonableness).

• Technological Demonstration: Prototype sample presentation, potentially in-person or virtual. Evaluation criteria include relevance, technical merit, and schedule.

• Key Deadlines: Dates TBD. Offerors should monitor SAM.gov and JTNC for updates.

• Not specified in this document; refer to the baseline BAA.

• The Government reserves the right to skip Step Two of Phase One and proceed directly to Phase Two.

• Offerors must submit a white paper to be eligible for award; proposals submitted without a white paper will not be considered.

• Rough Order of Magnitude (ROM) must be broken out by base and option periods.

• Anticipated funding is subject to change and availability.

Solicitation / RFP / RFQ

This document is a White Paper (WP) Call (Call #0002) under Broad Agency Announcement (BAA) BAA-25-R-C2CFT, Topic #N2104, focusing on "Command Post Mobility/Survivability." The U.S. Army PEO C3N seeks innovative solutions for mounted and dismounted radio frequency units (MDRFU) to improve communication systems for Corps Command Posts (CP) and On-the-Move (OTM) operations. The goal is to address limitations of current systems, such as antenna farms, which hinder maneuverability and concealment, especially in challenging environments.

• Problem: Current systems struggle with antenna repositioning, leading to degraded communication reliability and operational flexibility, particularly for armored platforms in high-vegetation or concealed areas. Fixed antenna placements also limit maneuverability and concealment.

• Solution Required: A low-profile, multi-band, agile, modular, and scalable antenna system with integrated High-Power Amplifier (HPA) functionality.

• Key Requirements (Threshold):

  • Frequency Support: HF, VHF, UHF, L-band, S-band, C-band, and 5G bands (30 MHz to 300 GHz).
  • Variable Power Output: 1W to 100W.
  • Mounted/Dismounted Capability: Quick mount/dismount features.
  • Waveform Adaptability: Support for HF, SINCGARS, TSM, 2x2 and 4x4 Silvus, and 5G.

• Key Requirements (Objective):

  • System Integration: Full CMOSS and Software Defined Radio (SDR) compatibility.

• Key Features & Design Objectives: Multi-band frequency support, agile tuning, modular HPA, advanced antenna construction (lightweight, low-profile), and platform integration (compact, robust interfaces).

• Contract Type: The Army may elect to award contracts for this effort.

• Period of Performance: One (1) up to 12-month base period and one (1) up to 12-month option period. The option period is not guaranteed.

• Process: Two-step process: Phase One (Step One) - Submission of White Papers; Step Two (By Invitation Only) - Technological Demonstration; Phase Two (By Invitation Only) - Submission of Proposals. The government may skip Step Two of Phase One.

• White Paper Submission: Via Joint Tactical Networking Center (JTNC) Joint Communications Marketplace (JCM) Technical Exchange Meeting (TEM) Industry Community.

• WP Length: Shall not exceed eight (8) pages.

• Evaluation Criteria:

  • Part One (Go/No-Go): Cost, Technology Readiness Level (TRL 6 or higher), Schedule, and Compliance with submission requirements.
  • Part Two (Ordered by Importance): Importance to Agency Programs, Technical Merit/Challenge, and Schedule.

• Technological Demonstration: Prototype sample presentation (45 minutes) to showcase capabilities. This is by invitation only.

• Key Deadlines: Dates for WP Submission Opens and Closes are TBD.

• This call is for basic research, applied research, and/or development not related to specific system or hardware procurement.

• Offerors must submit a White Paper to be eligible for award.

• Vendors must identify any current ongoing same/similar efforts.

• Offerors should monitor SAM.gov and the JTNC JCM TEM Industry Community for amendments or updates.

• Conflicting information between this call and the baseline BAA will be resolved in favor of this call.

Solicitation / RFP / RFQ

This Broad Agency Announcement (BAA) from the Army Futures Command (AFC), Command and Control Cross-Functional Team (C2-CFT) seeks research and development proposals. The BAA is open for five years from its original issue date of March 24, 2025, and will be valid through March 23, 2030, unless terminated sooner. It aims to advance the state-of-the-art or increase knowledge in areas related to the C2-CFT's mission, focusing on modernization of the Army's tactical network.

The BAA utilizes a two-phase process:

• Phase One: Submission of White Papers (WP) addressing specific research interests.
• Phase Two: Submission of Proposals (by invitation only) for selected offerors, potentially including a technological demonstration.

Research interests are categorized into four focus areas:

• N2101: Unified Network: Ensuring available, reliable, resilient, and transport-agnostic network capabilities.
• N2102: Common Operating Environment: Developing simple, intuitive mission command capabilities.
• N2103: Joint Interoperability/Coalition Accessible: Enhancing interaction between Army Forces and Joint/Coalition partners.
• N2104: Command Post Mobility/Survivability: Improving command post deployment readiness, reliability, mobility, and survivability.

All proposed technologies should be at Technology Readiness Level (TRL) 6 or higher.

The Army reserves the right to award various contract types, including but not limited to, FAR or Other Transaction (OT) for Prototype, cooperative agreement, or OT for Research. Cost reimbursement contracts require an acceptable accounting system.

• White Papers: Must be submitted via the Joint Communications Marketplace (JCM) site. Evaluation will be based on technical merit, relevance, and funding availability. Offerors will be notified if selected for Phase Two.
• Proposals: Submitted by invitation only after Phase One evaluation. Proposals will be evaluated based on scientific and technical merits, potential contributions to DoD mission, program management, cost realism, and intellectual property.
• Deadlines: While the BAA is open for submissions at any time, specific "calls for WP" may be issued with defined due dates.

The BAA encourages participation from industry, educational institutions, small businesses, and small disadvantaged business concerns. Specific small business size standards will apply based on the proposed NAICS code.

• This BAA is an expression of interest and does not commit the Government to make an award or pay for proposal preparation costs.
• The BAA may be amended to add new topics, with updates published on SAM.gov and the JCM site.
• All submissions must be unclassified.