Engine Water Wash Services

Questions & Answers / Clarifications

This document provides responses from the U.S. Air Force (USAF) to industry questions regarding the Engine Water Wash solicitation.

• Proposal Format: Proposals must adhere to FAR 52.212-1 and the "Addendum attachment." Font size must be at least 12-point, with 1-inch margins. Spacing can be single or double.
• Volume 1 Page Limit: The 20-page limit applies to all of Volume I.
• Technical Orders (TOs): Specific Air Force Technical Orders for engine washes are not provided due to distribution statements. Access to TOs is not considered an unfair advantage, and the PWS has been amended to remove references to them.
• Mobilization Timeline: The mobilization requirement will be amended to a phased rollout: six (6) locations per region within 30 days of award, and 100% of all regions within 60 days of award.
• HAZMAT Plans: A preliminary HAZMAT plan is required for proposal evaluation. The awardee will submit a final deliverable within 7 days of award. A single, overarching HAZMAT plan is needed, not 33 unique site-specific plans; individual site visits are not necessary.
• Pricing Unit: "Each" in the Pricing Matrix refers to a single, individual engine wash, not an aircraft wash event.
• CLIN Structure: CLINs represent aggregate wash requirements for a specific engine type within a designated region. Pricing should be a single, regionally aggregated price per CLIN.
• Historical Wash Quantities: Estimated quantities in Attachment 2 are based on historical workload and are the most accurate available. The Government does not track missed or deferred washes.
• Repeat Wash Cycles: Repeat wash cycles to meet the 500 PPM effluent contamination standard are included in the firm-fixed-price unit price.
• Effluent PPM Verification: Contractors must use their own field-testing equipment to record PPM readings after each wash. The Government will not provide testing equipment.
• Task Division: The document clarifies responsibilities between Government and contractor personnel for various tasks during wash events, including engine preparation, probe installation, access panel opening, de-preparation, and documentation.
• Installation Access: Contractor personnel will require escort by a base Point of Contact (POC) at all times.
• Glycol Use: Glycol is prohibited; only isopropyl alcohol is permitted as an additive for cold temperature operations.
• Access Equipment: Contractors must provide their own access equipment (stands, ladders) for high-wing aircraft.

This document clarifies several requirements and indicates that the PWS and Section L Addendum have been amended based on these Q&As, particularly regarding mobilization timelines and wash procedures.

Solicitation / RFP / RFQ

This document is an addendum to FAR 52.212-1 (Instructions to Offerors) and FAR 52.212-2 (Evaluation Factors for Award) for a solicitation concerning engine water wash services. It details the specific requirements for offerors responding to solicitation FA8626-26-R-B001.

Proposals must be submitted electronically to specified email addresses by the due date on SF 1449. All correspondence must use the subject line "FA8626-26-R-B001, Engine Water Wash". Allowable attachments are .pdf, .docx, or .xlsx; .zip and .exe files are not permitted.

Proposals must be submitted in two volumes:

• Volume I - Technical Capability (20-page limit):
  • Schedule and Wash Effectiveness: Detailed approach for effectively washing engine cores, including equipment quantity, personnel, support for five regions within two weeks of award, and a mobile, direct core, self-contained water wash system description (make/model, detergent, water capacity).
  • Environmental Plan: Approach for collecting and recycling/disposing of engine wash effluent, ensuring compliance with federal, state, and local laws.
  • Equipment Procedures: Safety plan for vehicle operation, equipment installation/operation (FOD-free design, damage-free mounting hardware, pictures/diagrams), risk assessment, and risk mitigation plan. Approach for operating on USAF flightline with Consolidated Tool Kit procedures.
  • Subcontractor Management & Small Business Participation: Plan for subcontractor management and compliance with FAR 52.219-8. Large businesses must submit a subcontracting plan per FAR 52.219-9. All offerors must submit Attachment 2, Small Business Participation Commitment Document (SBPCD).
  • Prior Experience: Evidence of at least one relevant water wash contract/job performed within five years of solicitation issue, similar in type and scale. Include contract numbers, agencies, and award dates. For subcontractors, provide similar details.
• Volume II - Price Proposal and Contract Documentation (Unlimited page limit):
  • Completed Attachment 6, Pricing Matrix.
  • Completed SF 1449 (Blocks 17a, 26, 30a, 30b, 30c), including unit and extended prices in USD (whole dollars).
  • Completed Representations & Certifications (online preferred, hard copy if necessary).

Offers must be held firm for 120 calendar days from the SF 1449 receipt date. Funds are not presently available; award is contingent upon fund availability. The Government reserves the right to cancel the solicitation.

Offers will be evaluated using FAR Part 13 Simplified Acquisition Procedures. The evaluation factors are Technical Capability and Price. Technical Capability is significantly more important than Price. A proposal rated "Unacceptable" for Technical Capability is un-awardable. Tradeoffs between price and technical risk are permitted.

Evaluation Factors:

• Factor 1 - Technical Capability: Assessed using Acceptable/Unacceptable ratings for Schedule and Wash Effectiveness, Environmental Plan, Subcontractor Management & Small Business Participation, and Prior Experience. Equipment Procedures will be assessed using Acceptable/Unacceptable and Technical Risk ratings.
• Factor 2 - Price: Evaluated based on submissions in Volume II.

Small business participation is a key evaluation subfactor. All offerors must submit a Small Business Participation Commitment Document (SBPCD).

FAR 52.212-1(e) regarding multiple offers is deleted and marked RESERVED. Offerors are encouraged to quote their most advantageous pricing in their initial response as award will be based on initial responses.

Amendment / Modification

This amendment modifies the solicitation FA862626RB001 by:

• Extending the response due date from April 10, 2026, to April 17, 2026.

• Updating Attachment 1: Performance Work Statement (PWS).

• Updating Exhibit A: Contract Data Requirements List (CDRL) Package.

• Updating Addendum 52.212-1 and 52.212-2 (Sections L&M).

• Solicitation Response Due Date

• Attachment 1: PWS_Engine Water Wash

• Exhibit A: Contract Data Requirements List (CDRLs)

• Addendum 52.212-1 and 52.212-2 (Sections L&M)

The proposal submission deadline has been extended to April 17, 2026. Key attachments and addenda related to proposal submission and requirements have also been updated.

Form / Attachment / Pricing Sheet

This document is a Contract Data Requirements List (CDRL) for Engine Water Wash Services, specifically Exhibit A, Revision 2. It details the data items that the contractor is required to deliver to the government under Contract #: FA8626-26-D-B001.

The CDRL outlines various data items (DD Forms 1423) required from the contractor, including:

• Process Validation (A001)
• Technical and Management Work Plan (A002)
• Contractor's Progress and Status Report (A003)
• Engineering and Technical Services Accomplishment Report (A004)
• Quality Assurance Program Plan (A005)
• Corrective Action Plan (A006)
• Hazardous Materials Management Program Plan (A007)
• Small Business Utilization Report (A008)
• Meeting Agenda (A009)
• Meeting Minutes (A010)

For each data item, the CDRL specifies:

• Data Item Description (DID) number and tailoring
• Contract reference (e.g., PWS paragraph)
• Frequency of submission
• Delivery dates and times, including handling of weekends and holidays
• Approval requirements and definitions
• Method of transmittal (electronic preferred, Microsoft 365 compatible)
• Distribution statements and addresses
• Requirements for resubmittal and final submittal
• Information on classified data items and export-controlled data

This document is crucial for potential bidders as it defines the specific reports, plans, and documentation required as part of the contract. Understanding these data delivery requirements is essential for accurately estimating proposal costs and ensuring compliance if awarded the contract. It outlines the expected deliverables beyond the core service of engine water washing.

Form / Attachment / Pricing Sheet

This document is a placeholder, indicating that a Small Business Subcontracting Plan may be required for this opportunity. It serves as a notification to potential bidders that they should be prepared to submit such a plan if it is deemed necessary based on the solicitation's requirements.

• The document explicitly states "RESERVED For Small Business Subcontracting Plan (If Required)".

Bidders should note that a Small Business Subcontracting Plan might be a mandatory component of their proposal. They should review the main solicitation documents carefully for specific instructions regarding the submission, content, and evaluation criteria for this plan. The requirement for this plan is contingent on the specific terms outlined in the primary solicitation.

Solicitation / RFP / RFQ

This document is a Wage Determination (No. 2015-5603, Revision No. 29) issued by the U.S. Department of Labor, Employment Standards Administration, Wage and Hour Division, for the area of California County of Kern. It establishes the minimum wage rates and fringe benefits required for various occupations under the Service Contract Act for contracts awarded on or after January 1, 2015, and before January 30, 2022, or contracts renewed or extended on or after January 30, 2022.

This document lists specific wage rates and fringe benefits for a wide range of occupations, categorized by occupational groups such as Administrative Support and Clerical Occupations, Automotive Service Occupations, Food Preparation and Service Occupations, Health Occupations, Information and Arts Occupations, and many more. It also outlines general benefits applicable to all listed occupations, including Health & Welfare.

• Effective Period: The wage rates are applicable for the year 2025, with annual adjustments expected.
• Applicable Law: Service Contract Act (SCA) and Executive Orders (EO) 13706 and 13658.

This document does not contain specific proposal submission or evaluation criteria. It serves as a baseline for wage and benefit requirements that must be met by contractors.

This document does not specify eligibility or set-aside requirements. However, it does mention that Executive Order 13658 applies to contracts awarded within a specific timeframe, requiring a minimum hourly wage rate.

• Paid Sick Leave: Executive Order 13706 mandates paid sick leave for employees working on covered contracts.
• Uniform Allowance: Contractors must provide uniforms or reimburse employees for their cost and maintenance, with specific standards outlined.
• Conformance Process: Procedures are detailed for classifying and determining wage rates for occupations not explicitly listed in the determination.
• Hazardous Pay: Specific differentials are outlined for work involving ordnance and explosives.

Form / Attachment / Pricing Sheet

This document, "Attachment 2: Estimated Engine Wash Requirements," provides a detailed breakdown of estimated engine wash requirements for various aircraft types across different regions and contract line item numbers (CLINs) for multiple option years. It serves as a reference for potential bidders to understand the projected workload and resource needs.

• CLINs and SLINs: Organizes requirements by CLIN (e.g., X001, X002) and SLIN (Sub-line item number) which often denote specific locations or aircraft types.
• Aircraft Type: Specifies the aircraft model (e.g., KC-135, B-52, KC-46, E-3, C-5M).
• Location: Identifies the base or region where the aircraft are located.
• Engines per Base: Indicates the number of engines associated with each base/SLIN.
• Washes per Year: Details the estimated number of engine washes required per aircraft type per base for the Base Year and four subsequent Option Years.

This attachment is crucial for bidders to:

• Estimate the scope and volume of engine wash services required over the contract period.
• Assess their capacity and resource allocation for different regions and aircraft types.
• Understand the potential fluctuations in workload across the Base Year and Option Years.

Other / Unclassified

This document is a U.S. Department of Labor Wage Determination (No. 2015-4495, Revision No. 30) for the Service Contract Act, applicable to the area of Georgia Counties of Houston and Peach. It lists various occupational codes and titles along with their corresponding minimum hourly wage rates and required fringe benefits.

This document is crucial for any bidder on a federal contract in the specified geographic area that is subject to the Service Contract Act. It outlines the minimum wage and benefit requirements for various job classifications that may be employed under such a contract. Bidders must ensure their proposed labor costs align with these determined rates to comply with federal regulations. The document also details specific provisions regarding paid sick leave (Executive Order 13706) and minimum wage rates (Executive Order 13658), as well as general benefits like vacation and holidays. It also provides guidance on the conformance process for occupations not explicitly listed.

Amendment / Modification

This document is an addendum to FAR 52.212-1 and 52.212-2 for the "Engine Water Wash" opportunity (FA8626-26-R-B001), dated 11 March 2026. It provides specific instructions for offerors and outlines the evaluation factors for award.

• Offer Submission: Proposals must be submitted electronically to Kayla Corsi (kayla.corsi@us.af.mil) and Laura Burnette (laura.burnette@us.af.mil) by the due date on SF 1449. Email subject lines must include "FA8626-26-R-B001, Engine Water Wash." Only .pdf, .docx, or .xlsx attachments are allowed; .zip or .exe files will be deleted. Offerors are encouraged to submit their most advantageous pricing initially.

• Period for Acceptance: Offers must remain valid for 120 calendar days from the SF 1449 receipt date.

• Multiple Offers: The tailoring of FAR 52.212-1(e) "Multiple offers" is deleted and marked as RESERVED.

• Proposal Volumes: Offerors must provide two separate volumes:

  • Volume I - Technical Capability (20-page limit): This volume includes five subfactors:
    1. Schedule and Wash Effectiveness (PWS 1.1.1, 1.1.2, 1.2.1, 1.3.1.1, 1.4): Requires a plan to support at least two locations per region simultaneously, detailing equipment, personnel, and ability to support all five regions within two weeks of award. Also requires an approach for a mobile, self-contained water wash system, detailing equipment, detergent, and water volume.
    2. Environmental Plan (PWS 1.1.1.2, 1.6.1): Requires a plan for collecting, recycling, or disposing of engine wash effluent, complying with all environmental laws and regulations.
    3. Equipment Procedures (PWS 1.3.3.2, 1.5.1.2): Requires a safety plan for wash equipment installation/operation, ensuring it is FOD-free, and includes a risk assessment. Also requires an approach for operating on USAF flightlines with Consolidated Tool Kit procedures.
    4. Subcontractor Management & Small Business Participation (PWS 1.8.5): Requires a plan for subcontractor management and compliance with FAR 52.219-8. Large businesses must submit a subcontracting plan per FAR 52.219-9. Attachment 2, Small Business Participation Commitment Document (SBPCD), is required from all offerors.
    5. Prior Experience: Requires evidence of relevant water wash contract/job experience within the last five years, similar in type and scale to the PWS requirements. Details of services performed, contract numbers, and issuing agencies are needed. For proposed subcontractors/partnerships, the prime contractor must provide a narrative for each.
  • Volume II - Price Proposal and Contract Documentation (Unlimited page limit): Requires a completed Attachment 6, Pricing Matrix, and a completed SF 1449 (blocks 17a, 26, 30a, 30b, 30c). All prices must be in USD and whole dollar amounts. Completed Representations & Certifications are also required.

• Notice to Offerors: Funds are not presently available. The Government reserves the right to cancel the solicitation. No award will be made until funds are available, and the Government is not obligated to reimburse offerors for any costs incurred.

• Proposals will be evaluated using FAR Part 13 Simplified Acquisition Procedures.

• The evaluation factors are Technical Capability and Price.

• A proposal with an "Unacceptable" Technical Capability rating is un-awardable.

• Technical Capability is significantly more important than Price and will be evaluated based on the five subfactors listed above.

• Price will be evaluated based on the requirements in FAR 52.212-1 Addendum, paragraph d.

• Rating Methods:

  • Technical Acceptable/Unacceptable Rating Method (Table 1)
  • Technical Risk Rating Method (Table 2) for Subfactor 3.

• Options will be evaluated by adding their total price to the basic requirement's total price.

• Submission Deadline: Due date specified on SF 1449.

• Evaluation Criteria: Technical Capability (significantly more important) and Price. Technical Capability is assessed across five subfactors.

• Not explicitly stated in this addendum, but Small Business Participation is a subfactor in the technical evaluation.

Solicitation / RFP / RFQ

This document is a Wage Determination from the U.S. Department of Labor, Employment Standards Administration, Wage and Hour Division. It establishes the minimum wage rates and fringe benefits required for various occupations performing work under a Service Contract Act (SCA) covered contract in specific Ohio counties (Delaware, Fairfield, Franklin, Licking, Madison, Morrow, Perry, Pickaway, Union).

This document lists specific occupational codes, titles, and their corresponding minimum hourly wage rates. It also indicates that "Fringe Benefits Required Follow the Occupational Listing." Specific fringe benefit rates are detailed later in the document, including Health & Welfare rates and provisions related to Executive Order 13706 (Paid Sick Leave).

• Wage Determination Number: 2015-4729
• Revision Number: 31
• Date of Last Revision: 12/03/2025
• Applicable Area: Ohio Counties of Delaware, Fairfield, Franklin, Licking, Madison, Morrow, Perry, Pickaway, Union.

This document does not contain proposal submission or evaluation instructions. It serves as a mandatory attachment for solicitations covered by the Service Contract Act.

This document does not specify eligibility or set-aside requirements. However, it does note that it does not apply to bona fide executive, administrative, or professional employees as defined in 29 C.F.R. Part 541, and provides guidance on identifying exempt computer professionals.

• Executive Order 13706 (Paid Sick Leave): Applies to contracts awarded on or after January 1, 2017. Contractors must provide 1 hour of paid sick leave for every 30 hours worked, up to 56 hours annually.
• Executive Order 13658: Applies to contracts awarded on or between January 1, 2015, and January 29, 2022 (and not renewed/extended after Jan 30, 2022). It mandates a minimum wage of $13.30 per hour (or higher if specified in the wage determination) for covered workers in 2025.
• Vacation: Provides for paid vacation based on years of service (2 weeks after 1 year, 3 weeks after 5 years, etc.).
• Holidays: Lists 12 paid holidays per year.
• Hazardous Pay Differential: Details 8% and 4% differentials for work involving ordnance, explosives, and incendiary materials.
• Uniform Allowance: Outlines requirements for providing or reimbursing uniform costs and maintenance.
• Conformance Process: Describes the procedure for classifying and determining wage rates for occupations not explicitly listed in the wage determination.

Form / Attachment / Pricing Sheet

This document, Exhibit A, is a Contract Data Requirements List (CDRL) for Engine Water Wash Services. It details the data items to be delivered by the contractor, including submittal, approval, and distribution requirements. The CDRL establishes the specific data items required under the contract, referencing Department of Defense (DD) Forms 1423 for each item.

• Data Item Deliveries: Outlines requirements for delivery dates and times, tailored data items, approval processes (including definitions for 'A' and 'N' designators), resubmittal procedures, and final submittal requirements.
• Method of Transmittal: Specifies general and paper format requirements for data item transmittal, including required information on Letters of Transmittal (LT).
• Marking Technical Documentation: Details distribution statements (A through F) and export-controlled warning statements, along with data item destruction procedures.
• Common Abbreviations: Provides a glossary of abbreviations found in DD Forms 1423.
• Specific Data Items (DD Forms 1423): The document includes detailed DD Forms 1423 for various data items such as Process Validation (A001), Technical and Management Work Plan (A002), Contractor's Progress and Status Report (A003), Engineering and Technical Services Accomplishment Report (A004), Corrective Action Plan (A006), Meeting Agenda (A009), and Meeting Minutes (A010). Each form specifies the authority, contract reference, frequency, submission dates, and remarks for the respective data item.

This CDRL is critical for bidders as it defines all the documentation and reporting the contractor will be required to submit throughout the contract. It outlines the format, content, submission timelines, and distribution requirements for each data item, directly impacting proposal preparation and contract execution. Bidders must understand these requirements to accurately estimate costs and resources, and to ensure compliance if awarded the contract.

Other / Unclassified

This document is a U.S. Department of Labor Wage and Hour Division "Register of Wage Determinations Under the Service Contract Act." It provides a list of occupational codes, titles, and corresponding minimum wage rates and fringe benefits required for contracts subject to the Service Contract Act in specific geographic areas. The document includes general wage and fringe benefit information, as well as specific notes regarding Executive Orders 13706 (Paid Sick Leave) and 13658 (Minimum Wage), and details on the conformance process for additional classifications.

This document is crucial for potential bidders on Service Contract Act-covered opportunities. It establishes the minimum wage rates and fringe benefits that must be paid to various categories of employees performing work under the contract. Bidders must use this information to accurately calculate labor costs for their proposals, ensuring compliance with federal regulations. It also outlines requirements for paid sick leave and minimum wage adjustments, which directly impact labor costs and contract administration.

Solicitation / RFP / RFQ

This solicitation (FA862626RB001) is for "Engine Water Wash Follow-On" services. The government is procuring on-wing and in-test-cell direct engine core water wash services utilizing heated, deionized water and detergent. The services are required to wet all compressor and turbine blade airfoil surfaces to clean on-wing engine cores. The process aims to remove accumulated contaminants and debris without environmental impact, requiring full capture, treatment, and disposal of all effluent in accordance with federal, state, and local regulations. The water wash system must be mobile.

• On-wing and in-test-cell direct engine core water wash services.

• Use of heated, deionized water and detergent with sufficient pressure and volume.

• Complete wetting of all compressor and turbine blade airfoil surfaces.

• Mobile water wash system.

• Full capture, treatment, and disposal of all effluent in accordance with environmental laws and regulations.

• Services are required for various engine types including F108-CF-100/201 (KC-135), F138-GE-100 (C-5M), TF33-P-103 (B-52H), TF33-P-100A (E-3 Sentry), and F139-PW-100 (KC-46A) engines.

• Services are to be provided at approximately 33 CONUS locations.

• The solicitation includes a Base Year and multiple Option Years (Option Year 1 through Option Year 4).

• Product Service Code (PSC): J028

• North American Industry Classification Standard (NAICS): 488190 with a size standard of $40,000,000.00.

• Pricing Arrangement: Firm Fixed Price for most line items.

• Solicitation Issue Date: March 11, 2026

• Offer Due Date: April 10, 2026, at 05:00 PM local time.

• The solicitation incorporates FAR 52.212-1, 52.212-3, and 52.212-4 by reference, with an addendum.

• Evaluation will be based on Technical Capability and Price, with technical capability being significantly more important than price.

• The acquisition is currently UNRESTRICTED.

• The Performance Work Statement (PWS) is provided as Attachment 1.

• Estimated Wash Requirements Document is Attachment 2.

• Safety Specifications are Attachment 3.

• Small Business Commitment Documents and Plans are Attachments 4 and 5.

• Pricing Matrix is Attachment 6.

• Wage Determinations for various locations are provided as attachments (7 through 42).

• Contract Data Requirements List (CDRL) is Exhibit A.

• Addendum to FAR 52.212-1 and 52.212-2 (Sections L&M) dated March 11, 2026, is provided as Attachment 44.

Form / Attachment / Pricing Sheet

This document, "Attachment 3_ Safety Specifications," outlines the safety requirements for the Jet Engine Water Wash Service. It details the contractor's responsibilities in implementing and maintaining a safety program.

• General Requirements: Mandates a safety program to protect government personnel and property, including mishap notification and reporting procedures.
• Mishap Notification: Requires immediate notification (within 1 hour) to the government representative and a written report within three calendar days for all mishaps or incidents. Specific information to be included in the notification is detailed.
• Safety Program Elements: Lists key areas the contractor's safety program must address, such as Housekeeping, Material Handling Equipment (MHE), Handling/Storage of Flammable Liquids, Vehicle Operations, Tool Control, Foreign Object Damage (FOD), Tobacco Use, Hazardous Energy Control, and Confined Spaces.
• Bibliography of Publications/Directives: References specific Air Force Instructions (AFIs) that govern these safety elements.

This attachment is crucial for bidders to understand the safety standards and protocols they must adhere to if awarded the contract. It highlights the importance of a robust safety program, detailed reporting procedures for incidents, and compliance with specific Air Force safety regulations. Bidders should review these requirements to ensure they can meet them and factor any associated costs or efforts into their proposals.

Form / Attachment / Pricing Sheet

This document, "Small Business Participation Commitment Document (SBPCD)", is Attachment 4 to Solicitation # FA8626-26-R-B001 for Engine Water Services. It requires potential prime contractors to outline their commitment to small business participation in the contract.

• Prime Contractor Size: Section 1 requires the contractor to indicate their size status (e.g., "Other than Small Business" or "Small Business" with specific socioeconomic categories like SDB, WOSB, HUBZone, SDVOSB).
• Minimum Quantitative Requirement (MQR): Section 2 requires the contractor to propose a contract value and then detail the dollar value and percentage of the total contract value allocated to "Total Small Business" and specific small business categories (SDB, WOSB, HUBZone, Veteran-Owned, Service-Disabled Veteran-Owned).
• Small Business Participants: Section 3 provides a table for listing specific small business participants, their business category, the product/service they will provide, their NAICS code, and the nature of their commitment.

This document is crucial for bidders to understand the small business subcontracting goals and reporting requirements for the opportunity. Bidders must complete this form to demonstrate how they will meet or exceed the government's small business participation objectives. Failure to adequately address small business participation may impact proposal evaluation.

Form / Attachment / Pricing Sheet

This document is a pricing matrix for Jet Engine Water Wash Services, serving as Attachment 6 to the solicitation. It provides a template for offerors to input their proposed unit prices for various services across different regions and contract periods.

• Instructions: Offerors must input unit prices into highlighted yellow cells. Prices should be rounded to the nearest whole dollar. Extended prices and Total Evaluated Price (TEP) will be calculated automatically.
• Service Breakdown: The matrix details pricing for different engine types (KC-135R/T, B-52H, KC-46A, E-3B/G, C-5M) and services like "On-Site Cancellation of Scheduled Washes" and "Data and Reports." Pricing is broken down by region (West, Central, Midwest, Southeast, Northeast).
• Contract Periods: Pricing is requested for a Base Year, four Option Years, and a 6-Month Option.
• Estimated Quantities: The document also provides estimated quantities for each service line item (SLIN) across the different contract periods and regions.

This pricing matrix is critical for bidders to prepare their proposals. Offerors must carefully review the estimated quantities and input their unit prices in the designated cells. The accuracy of these entries will directly impact the total evaluated price and the overall competitiveness of their bid. Bidders should pay close attention to the rounding instructions and the specific engine types and regions for which pricing is required.

Form / Attachment / Pricing Sheet

This document, "Attachment 7 Wage Determination List," provides a list of required wage determinations for Jet Engine Water Wash Services, as referenced in Solicitation FA8626-26-R-B001.

The list is organized by region (West, Central, Midwest, Southeast, Northeast) and includes:

• Attachment Number
• Wage Determination Number
• Place of Performance (including Air Force Base or facility)
• Location (County)
• Location (State)
• Revision Number

This attachment is crucial for bidders to understand the prevailing wage requirements that will apply to the Jet Engine Water Wash Services. Bidders must review this list to ensure their proposals and labor cost estimations comply with the specified wage determinations for the relevant performance locations.

Other / Unclassified

This document is a U.S. Department of Labor Wage Determination (No. 2015-5537, Revision No. 27) for the Service Contract Act, applicable to Washington Counties of Spokane and Stevens, Washington. It lists various occupational codes and their corresponding minimum hourly wage rates and fringe benefits required for federal contracts in that region.

This document is crucial for potential bidders on federal service contracts in the specified geographic area. It outlines the minimum wage and benefit standards that must be paid to service employees working on such contracts. Bidders must consult this wage determination to accurately calculate labor costs for their proposals and ensure compliance with federal labor laws if awarded a contract.

Form / Attachment / Pricing Sheet

This document is a U.S. Department of Labor, Wage and Hour Division, Register of Wage Determinations under the Service Contract Act. It provides the minimum wage rates and fringe benefits required for various occupations in the Salt Lake and Tooele Counties of Utah for contracts subject to the Service Contract Act.

• Lists numerous occupational codes and titles.
• Specifies the minimum hourly wage rate for each occupation.
• Indicates that "Fringe Benefits Required Follow the Occupational Listing."
• Includes notes on Executive Orders 13706 (Paid Sick Leave) and 13658 (Minimum Wage), detailing their applicability and requirements.
• Outlines health and welfare benefits and their rates.
• Describes vacation and holiday entitlements.
• Provides a conformance process for unlisted classifications.

This document is crucial for bidders responding to solicitations that incorporate the Service Contract Act. It establishes the minimum labor costs that must be factored into proposals for covered contracts. Bidders must ensure their proposed wages and benefits meet or exceed these determined rates to be compliant. It also details specific requirements for paid sick leave and minimum wage adjustments applicable to federal contracts.

Other / Unclassified

This document is a U.S. Department of Labor Wage Determination (No. 2015-5629, Revision No. 28) under the Service Contract Act, dated December 03, 2025. It lists prevailing wage rates and fringe benefits for various occupations in California, specifically for the counties of Riverside and San Bernardino. The document details hourly wage rates for a wide range of job categories, from administrative and clerical support to health occupations, information technology, and maintenance roles.

This wage determination is crucial for any contractor bidding on or performing federal service contracts in the specified geographic areas. It establishes the minimum wage and benefit rates that must be paid to employees working on such contracts, ensuring compliance with labor laws. Bidders must consult this document to accurately calculate labor costs for their proposals and to understand their obligations regarding employee compensation and benefits if awarded the contract. It also outlines specific provisions for paid sick leave (EO 13706) and minimum wage requirements (EO 13658), along with details on vacation and holiday pay. The document also provides guidance on the conformance process for occupations not explicitly listed.

Form / Attachment / Pricing Sheet

This document is a U.S. Department of Labor Wage Determination (WD) for the Service Contract Act, specifically Wage Determination No. 2015-5613, Revision No. 31, dated December 3, 2025. It establishes the minimum wage rates and fringe benefits required for various occupations performing contract work in the area of California County of Los Angeles.

• Lists numerous job classifications with corresponding occupation codes and minimum hourly wage rates.
• Includes specific "Occupation Notes" for Heating, Air Conditioning, Refrigeration, and Laundry services, directing users to other Wage Determinations (WD 1986-0879 and WD 1977-1297).
• Details general benefits applicable to all listed occupations, including Health & Welfare ($5.55/hour or $222.00/week), Vacation (2, 3, or 4 weeks based on service length), and 11 paid holidays.
• Provides specific information on Paid Sick Leave (EO 13706) and minimum wage rates under EO 13658.
• Outlines conditions for Hazardous Pay Differential (8% for high hazard, 4% for low hazard).
• Specifies Uniform Allowance requirements and reimbursement rates ($3.35/week).
• Includes a section on the "Conformance Process" for contractors needing to classify service employees not listed in the wage determination.

This document is critical for bidders to understand the minimum labor costs associated with performing the contract. It dictates the required wages and benefits that must be paid to employees, directly impacting the cost proposal. Bidders must ensure their proposed labor rates meet or exceed these minimums to be compliant.

Solicitation / RFP / RFQ

This document is a U.S. Department of Labor, Wage and Hour Division "Register of Wage Determinations Under the Service Contract Act." It establishes minimum wage rates and fringe benefits for various occupations in California, specifically for the counties of Sutter and Yuba. This is relevant for contractors bidding on federal service contracts in this geographic area.

This document does not outline specific project requirements or deliverables. Instead, it provides a list of occupational codes and titles, along with their corresponding minimum hourly wage rates and required fringe benefits. It also details specific notes and executive orders that may apply to contractors, such as paid sick leave and minimum wage requirements.

This document does not specify contract type, period of performance, or estimated value. It is a general wage determination applicable to service contracts.

This document does not contain information on proposal submission or evaluation criteria.

This document does not specify any eligibility requirements or set-aside information. However, it does reference Executive Orders 13706 and 13658, which may impact contractor obligations regarding paid sick leave and minimum wage rates.

• The wage determination is subject to revision, with the last revision date noted as 12/03/2025.
• It includes specific footnotes for certain occupations (e.g., Computer Employees, Air Traffic Controllers, Weather Observers) that provide additional details on applicability and pay differentials.
• A "Conformance Process" section outlines how contractors should handle classifications not explicitly listed in the wage determination.
• Applicable benefits include Health & Welfare at $5.55 per hour or $5.09 per hour under EO 13706.

Form / Attachment / Pricing Sheet

This document is a Register of Wage Determinations under the Service Contract Act, issued by the U.S. Department of Labor, Employment Standards Administration, Wage and Hour Division. It provides the minimum wage rates and fringe benefits required for various occupations in Maricopa and Pinal Counties, Arizona, for contracts subject to the Service Contract Act.

• Lists numerous occupational codes and titles.
• Specifies the minimum hourly wage rate for each occupation.
• Indicates that "Fringe Benefits Required Follow the Occupational Listing."
• Includes notes on Executive Orders 13706 (Paid Sick Leave) and 13658 (Minimum Wage), detailing requirements for paid sick leave and minimum hourly wages for covered contracts.
• Outlines general benefits such as vacation and paid holidays.
• Provides information on the conformance process for unlisted classifications.

This document is crucial for bidders to understand the labor costs associated with performing services under a contract in the specified geographic area. It establishes the minimum wages and benefits that must be paid to employees, directly impacting the cost proposal and overall bid competitiveness. Bidders must ensure their proposals comply with these wage and benefit requirements.

Wage Determination

This document is a Wage Determination (No. 2015-6025, Revision No. 3, dated 12/03/2025) issued by the U.S. Department of Labor, Wage and Hour Division, under the Service Contract Act. It specifies the minimum wage rates and fringe benefits required for various occupations in the North Dakota counties of McHenry, Renville, and Ward.

• Applicability: This wage determination applies to contracts subject to the Service Contract Act awarded on or after January 1, 2017, and potentially to contracts awarded between January 1, 2015, and January 29, 2022, if not renewed or extended after January 30, 2022.
• Minimum Wage Rates: The document lists specific minimum hourly wage rates for a wide range of occupations, categorized by general areas such as Administrative Support, Automotive Service, Health Occupations, Information Technology, and Maintenance.
• Fringe Benefits: All listed occupations receive specific fringe benefits. The standard Health & Welfare benefit is $5.55 per hour. Additionally, Executive Order 13706 mandates paid sick leave, providing 1 hour of paid sick leave for every 30 hours worked, up to 56 hours per year.
• Executive Order 13658: For contracts subject to this EO, the minimum wage rate is at least $13.30 per hour (or the applicable wage rate from this determination, if higher) for work performed in 2025. This rate is adjusted annually.
• Hazardous Pay Differential: An 8% differential applies to positions with a high degree of hazard involving ordnance and explosives. A 4% differential applies to positions with a low degree of hazard involving ordnance and explosives.
• Uniform Allowance: Contractors must provide uniforms or reimburse employees for their cost, including maintenance (cleaning/laundering), at a rate of $3.35 per week, unless uniforms are "wash and wear" and do not require special cleaning.
• Conformance Process: If a contractor needs to employ individuals in classifications not listed in this determination, a conformance process must be followed, requiring a proposed classification, wage rate, and fringe benefits to be submitted to the contracting officer and the Department of Labor for approval.

This document is crucial for bidders to understand the labor costs associated with the contract. It establishes the minimum wages and benefits that must be paid to service employees performing work under the contract, directly impacting the cost proposal and overall bid competitiveness.

Solicitation / RFP / RFQ

This document is a U.S. Department of Labor Wage Determination (No. 2015-5655, Revision No. 25) for the State of California, County of Solano, under the Service Contract Act. It establishes the minimum wage rates and fringe benefits required for various occupations employed on federal service contracts in that locality.

The document lists numerous occupational codes and titles, along with their corresponding minimum hourly wage rates. It also specifies required fringe benefits, including Health & Welfare rates and provisions for paid sick leave (Executive Order 13706) and minimum wage rates (Executive Order 13658).

This document does not specify contract type, period of performance, or estimated value, as it is a wage determination, not a solicitation itself. However, it notes that the minimum wage rate for 2025 is $13.30 per hour or higher, as listed in the determination.

Not applicable, as this is a wage determination, not a solicitation requiring proposal submission.

Not applicable. This document sets wage standards for all covered federal service contracts in the specified area.

• The document details specific requirements for paid sick leave and minimum wage rates mandated by Executive Orders 13706 and 13658.
• It outlines the process for requesting authorization of additional classifications and wage rates (Conformance Process) if a required occupation is not listed.
• Vacation and holiday pay provisions are also detailed.

Other / Unclassified

This document is a U.S. Department of Labor, Wage and Hour Division, "Register of Wage Determinations Under the Service Contract Act." It lists various occupational classifications and their corresponding minimum wage rates and fringe benefits applicable to federal service contracts in Iowa (Woodbury County) and Nebraska (Dakota County).

This document is crucial for bidders responding to federal service contracts in the specified geographic areas. It provides the legally mandated minimum wage rates and fringe benefits that must be paid to employees performing work under such contracts. Bidders must ensure their proposals account for these wage and benefit requirements to be compliant. The document also outlines Executive Orders related to paid sick leave and minimum wage adjustments, as well as the process for requesting additional classifications and wage rates if an occupation is not listed.

Key details include:

• Minimum Wage Rates: Specific hourly rates for a wide range of occupations, from administrative support to technical and transportation roles.
• Fringe Benefits: Information on required health and welfare benefits, including specific rates per hour or per week.
• Executive Orders: Applicability of EO 13706 (Paid Sick Leave) and EO 13658 (Minimum Wage).
• Vacation and Holidays: Standard provisions for paid vacation and holidays.
• Conformance Process: Guidance on how to request wage rates for unlisted occupations.

Wage Determination

This document is a U.S. Department of Labor Wage Determination (No. 2015-5351, Revision No. 29) issued under the Service Contract Act. It establishes the minimum wage rates and fringe benefits required for various occupations performing work on federal contracts in Lancaster County, Nebraska.

• Occupational Listings: The document provides a comprehensive list of job classifications, including administrative support, clerical, automotive, health, information technology, and maintenance occupations.
• Wage Rates: For each occupation, a specific hourly wage rate is listed.
• Fringe Benefits: The document indicates that "Fringe Benefits Required Follow the Occupational Listing." Specific fringe benefits are detailed later in the document, including:
  • Health & Welfare: $5.55 per hour (or $222.00 per week / $962.00 per month).
  • Health & Welfare (EO 13706): $5.09 per hour (or $203.60 per week / $882.27 per month).
  • Vacation: Paid vacation is provided based on years of service (2 weeks after 1 year, up to 5 weeks after 20 years).
  • Holidays: A minimum of eleven paid holidays per year are listed.
• Executive Orders: The document references Executive Order 13706 (Paid Sick Leave) and Executive Order 13658 (Minimum Wage), outlining requirements for contractors regarding paid sick leave and minimum hourly wages for covered contracts.
• Conformance Process: Instructions are provided for contractors needing to classify employees for occupations not explicitly listed in this wage determination.

This wage determination is crucial for any contractor bidding on or performing federal service contracts in Lancaster County, Nebraska, as it dictates the minimum labor costs associated with various job roles. Bidders must factor these wage and benefit requirements into their proposals to ensure compliance.

Solicitation / RFP / RFQ

This document is a U.S. Department of Labor Wage Determination (No. 2015-5339, Revision No. 28) for the state of Kansas, specifically for the counties of Jackson, Jefferson, Osage, Shawnee, and Wabaunsee. It establishes minimum wage rates and fringe benefits for various occupations required for service contracts in this area.

This document lists specific occupational classifications and their corresponding minimum hourly wage rates. It also outlines required fringe benefits, including Health & Welfare benefits ($5.55 per hour or $222.00 per week) and specific provisions for paid sick leave (EO 13706) and minimum wage rates (EO 13658).

This document does not specify contract type, period of performance, or estimated value. It serves as a baseline for wage and benefit requirements for any federal service contract awarded within the specified geographic area.

This document does not contain proposal submission instructions or evaluation criteria. It is a wage determination that contractors must adhere to when performing covered services.

This document does not specify any eligibility or set-aside requirements. It applies to all federal service contracts within the designated area.

• The document includes detailed lists of occupations across various categories such as Administrative Support, Automotive Service, Health Occupations, Information Technology, and more.
• It specifies paid vacation (2 weeks after 1 year, 3 weeks after 5 years, 4 weeks after 15 years) and a minimum of eleven paid holidays per year.
• It outlines hazardous pay differentials (8% for high hazard, 4% for low hazard) and uniform allowance requirements.
• A conformance process is described for situations where a required job classification is not listed in the wage determination.

Form / Attachment / Pricing Sheet

This document is a "REGISTER OF WAGE DETERMINATIONS UNDER THE SERVICE CONTRACT ACT" issued by the U.S. Department of Labor, Employment Standards Administration, Wage and Hour Division. It provides the minimum wage rates and fringe benefits required for various occupations when performing contract work in specific geographic areas. This document is crucial for contractors to understand their labor cost obligations.

• Geographic Area: Kansas Counties of Butler, Harvey, Sedgwick, Sumner.
• Occupational Listings: Detailed list of occupations with corresponding codes, titles, and required minimum hourly wage rates.
• Fringe Benefits: Indicates that fringe benefits are required and follow the occupational listing. Specific benefits like Health & Welfare are detailed, including rates and conditions.
• Executive Orders: Mentions Executive Order (EO) 13706 (Paid Sick Leave) and EO 13658 (Minimum Wage), outlining contractor obligations and minimum wage requirements for covered contracts.
• Conformance Process: Outlines the procedure for contractors to request additional classifications and wage rates if an occupation is not listed in the determination.

This document directly impacts a bidder's cost proposal. Bidders must use these wage rates and fringe benefit requirements to accurately calculate labor costs for their proposals. Failure to comply with these minimums can lead to non-compliance and potential disqualification. It ensures fair wages and benefits for employees working on federal contracts within the specified area.

Form / Attachment / Pricing Sheet

This document is a "REGISTER OF WAGE DETERMINATIONS UNDER THE SERVICE CONTRACT ACT" issued by the U.S. Department of Labor, Employment Standards Administration, Wage and Hour Division. It provides the minimum wage rates and fringe benefits required for various occupations in a specific geographic area.

• Area: Oklahoma Counties of Greer, Harmon, Jackson, Jefferson, Kiowa, Stephens, Tillman.
• Occupational Listing: A comprehensive list of job titles with corresponding wage rates and footnotes.
• Fringe Benefits: Required fringe benefits are listed separately and apply to all occupations.
• Executive Orders: Notes on Executive Order 13706 (Paid Sick Leave) and Executive Order 13658 (Minimum Wage) are included, outlining contractor obligations.
• Conformance Process: Details on how to request additional classifications and wage rates if an occupation is not listed.

This document is crucial for bidders as it establishes the minimum wage and fringe benefit requirements for service employees working under a contract in the specified area. Bidders must ensure their proposed labor costs comply with these rates to be considered responsive and to accurately estimate project expenses.

Wage Determination

This document establishes the minimum wage rates and fringe benefits for various occupations employed under service contracts in the specified geographic area. It serves as a baseline for contractors to ensure fair compensation for their employees.

• Geographic Area: Oklahoma Counties of Canadian, Cleveland, Grady, Lincoln, Logan, McClain, Oklahoma.
• Applicable Law: Service Contract Act (SCA).
• Occupational Listings: Provides a comprehensive list of job titles, corresponding occupation codes, and their minimum hourly wage rates.
• Fringe Benefits: Details required fringe benefits, including Health & Welfare at $5.55 per hour (or $222.00 per week / $962.00 per month) and specific provisions for Executive Order 13706.
• Executive Orders: Notes applicability of Executive Order 13706 (Paid Sick Leave) and Executive Order 13658 (Minimum Wage for Federal Contractors), outlining requirements and minimum rates for 2025.
• Vacation and Holidays: Specifies paid vacation accrual (2 weeks after 1 year, 3 weeks after 10 years, 4 weeks after 15 years) and a minimum of eleven paid holidays per year.
• Hazardous Pay: Outlines an 8% differential for high-hazard work involving ordnance/explosives and a 4% differential for lower-hazard work.
• Uniform Allowance: Details requirements for providing or reimbursing uniform costs, including cleaning.
• Conformance Process: Explains the procedure for requesting additional classifications and wage rates not listed in the determination.

This wage determination is critical for bidders to accurately estimate labor costs for their proposals. Understanding these minimum wage and benefit requirements is essential for compliance with federal contracting regulations.

Form / Attachment / Pricing Sheet

This document is a "REGISTER OF WAGE DETERMINATIONS UNDER THE SERVICE CONTRACT ACT" issued by the U.S. Department of Labor. It provides the minimum wage rates and fringe benefits required for various occupations when performing contract work subject to the Service Contract Act in specific geographic areas.

• Wage Determination Number: 2015-5075, Revision No.: 31
• Date of Last Revision: 12/03/2025
• Geographic Area: Illinois Counties of Bond, Calhoun, Clinton, Jersey, Madison, Monroe, St. Clair; Missouri Counties of Franklin, Jefferson, Lincoln, St. Charles, St. Louis, St. Louis City, Warren.
• Occupational Listing: A comprehensive list of job titles with corresponding minimum hourly wage rates.
• Fringe Benefits: Required fringe benefits are listed separately and apply to the occupational listing.
• Executive Orders: Notes on Executive Order 13706 (Paid Sick Leave) and Executive Order 13658 (Minimum Wage) and their applicability to covered contracts.
• Conformance Process: Information on how to request additional classifications and wage rates if a required job is not listed.

This document is crucial for bidders to understand the minimum labor costs associated with performing the contract. It dictates the baseline wages and benefits that must be paid to employees working on the contract, directly impacting proposal pricing and overall cost management. Bidders must ensure their proposed wages meet or exceed these determined rates.

Form / Attachment / Pricing Sheet

This document is a U.S. Department of Labor Wage Determination, specifically for the Service Contract Act. It lists the minimum wage rates and fringe benefits required for various occupations in specific geographic areas. This is typically attached to solicitations to inform bidders of the labor costs they must account for in their proposals.

• Wage Determination Number: 2015-4809, Revision No. 32
• Date of Last Revision: 12/03/2025
• Area: Indiana Counties of Cass, Fulton, Miami, White
• Occupational Listings: Includes a comprehensive list of job titles (e.g., Accounting Clerk, Administrative Assistant, Automotive Electrician, Computer Operator, Firefighter, Laborer, Nurse, etc.) with corresponding minimum hourly wage rates.
• Fringe Benefits: States that fringe benefits required follow the occupational listing and details specific Health & Welfare benefits ($5.55/hour or $222.00/week) and EO 13706 benefits ($5.09/hour or $203.60/week).
• Executive Orders: Notes applicability of Executive Order 13706 (Paid Sick Leave) and Executive Order 13658 (Minimum Wage) with specific requirements and rates for 2025.
• Vacation and Holidays: Outlines paid vacation accrual based on years of service and a minimum of thirteen paid holidays per year.
• Footnotes: Provides specific details and exclusions for certain occupations, such as Computer Employees and Air Traffic Controllers.
• Conformance Process: Explains the process for requesting additional classifications and wage rates if an occupation is not listed.

This document is critical for bidders as it establishes the minimum labor costs that must be factored into their proposals for any contract awarded under this wage determination. Failure to comply with these wage and benefit requirements can lead to non-compliance and potential penalties. Bidders must ensure their proposed wages and benefits meet or exceed these minimums for all listed occupations.

Solicitation / RFP / RFQ

This document is a Register of Wage Determinations under the Service Contract Act, issued by the U.S. Department of Labor. It specifies the minimum wage rates and fringe benefits required for various occupations in the Michigan counties of Lapeer, Macomb, Oakland, and St. Clair. This is relevant for contractors bidding on federal service contracts in these areas, as it dictates labor costs.

• Minimum hourly wage rates for a wide range of occupations, from administrative support to technical and recreational roles.

• Specified fringe benefits, including Health & Welfare at $5.55 per hour (or $222.00 per week / $962.00 per month).

• Information on Executive Orders 13706 (Paid Sick Leave) and 13658 (minimum wage rate adjustments).

• Details on vacation and holiday entitlements.

• The wage determination is subject to annual adjustments, with the current revision dated 12/03/2025.

• The document outlines the process for requesting additional classifications and wage rates (Conformance Process) if an occupation is not listed.

• Not applicable to this document; it provides wage data for proposals, not submission instructions.

• Not applicable to this document.

• This document is a foundational component for calculating labor costs in bids for federal service contracts in the specified geographic area.

• Contractors must ensure compliance with the listed wage rates and fringe benefits.

Solicitation / RFP / RFQ

This document is a Register of Wage Determinations under the Service Contract Act, issued by the U.S. Department of Labor. It specifies the minimum wage rates and fringe benefits required for various occupations in the specified geographic area (Alabama Counties of Bibb, Blount, Jefferson, Shelby, St Clair, Walker). This information is crucial for contractors bidding on federal service contracts in this region to ensure compliance with labor laws.

• Establishes minimum hourly wage rates for a wide range of occupations, from administrative support and clerical roles to technical, health, and maintenance positions.

• Specifies required fringe benefits, including Health & Welfare contributions ($5.55 per hour or $222.00 per week) and provisions for paid sick leave as per Executive Order 13706.

• Outlines vacation benefits based on years of service (2 weeks after 1 year, 3 weeks after 8 years, 4 weeks after 20 years).

• Lists eleven paid holidays per year.

• Details specific pay differentials for hazardous duty (8% or 4%) and night/Sunday work (10% night differential, 25% Sunday premium).

• The wage determination number is 2015-4591, Revision No. 31, with the last revision date of 12/03/2025.

• The determination is applicable to contracts awarded on or after January 1, 2015, and potentially covers contracts awarded up to January 29, 2022, with provisions for adjustments.

• Bidders must ensure their proposals reflect these minimum wage and benefit requirements.

• The document includes a process for requesting authorization of additional classifications and wage rates (Standard Form 1444) if an occupation is not listed.

• Not directly applicable, as this document focuses on wage and benefit requirements for any contractor performing covered services.

• The document references the Service Contract Act Directory of Occupations for job duty definitions.

• It also notes the applicability of Executive Order 13658, which sets a minimum wage rate for federal contract employees.

Form / Attachment / Pricing Sheet

This document is a "REGISTER OF WAGE DETERMINATIONS UNDER THE SERVICE CONTRACT ACT" issued by the U.S. Department of Labor, Employment Standards Administration, Wage and Hour Division. It provides the minimum wage rates and fringe benefits required for various occupations when performing contract work subject to the Service Contract Act in specific geographic areas.

• Area: Tennessee Counties of Anderson, Blount, Campbell, Grainger, Knox, Loudon, Morgan, Roane, Union.
• Occupational Listing: A comprehensive list of job titles, their corresponding occupation codes, and the minimum hourly wage rate.
• Fringe Benefits: Indicates that fringe benefits are required and follow the occupational listing. Specific benefits like Health & Welfare and Health & Welfare EO 13706 are detailed at the end.
• Executive Orders: Notes the applicability of Executive Order (EO) 13706 (Paid Sick Leave) and EO 13658 (Minimum Wage) to covered contracts, outlining requirements and minimum rates.
• Vacation and Holidays: Specifies paid vacation accrual based on years of service and a list of eleven paid holidays.
• Conformance Process: Outlines the procedure for contractors to request additional classifications and wage rates if an occupation is not listed.

This document is crucial for bidders to understand the labor costs associated with performing services under a government contract in the specified Tennessee counties. It establishes the minimum wage and benefit requirements for employees, which must be factored into proposal pricing to ensure compliance with the Service Contract Act and relevant Executive Orders.

Form / Attachment / Pricing Sheet

This document is a Register of Wage Determinations under the Service Contract Act, issued by the U.S. Department of Labor. It provides the minimum wage rates and fringe benefits required for various occupations in a specific geographic area when performing contract work subject to the Service Contract Act.

• Geographic Area: Mississippi Counties of Clarke, Greene, Jasper, Jones, Kemper, Lauderdale, Neshoba, Newton, Wayne.
• Occupational Listings: Includes a comprehensive list of job titles, corresponding occupation codes, and their minimum hourly wage rates.
• Fringe Benefits: Indicates that fringe benefits are required and follow the occupational listing, with specific health and welfare rates provided.
• Executive Orders: Notes applicability of Executive Order 13706 (Paid Sick Leave) and Executive Order 13658 (Minimum Wage), outlining specific requirements and rates for contracts covered by these orders.
• Vacation and Holidays: Details paid vacation and holiday provisions for employees.
• Conformance Process: Outlines the procedure for contractors to request additional classifications and wage rates if an occupation is not listed.

This document is crucial for bidders to understand the minimum labor costs associated with performing services in the specified area under a Service Contract Act contract. It directly impacts proposal pricing and ensures compliance with federal labor laws. Bidders must ensure their proposed wages and benefits meet or exceed these minimums.

Solicitation / RFP / RFQ

This document is a U.S. Department of Labor Wage Determination (No. 2015-5191, Revision No. 29) for the Service Contract Act, applicable to the Louisiana Parishes of Bossier, Caddo, and De Soto. It establishes minimum wage rates and fringe benefits for various occupations required for federal contracts in this area.

This document lists specific occupational codes and titles, along with their corresponding minimum hourly wage rates. It also specifies required fringe benefits, including Health & Welfare benefits at $5.55 per hour (or $222.00 per week/$962.00 per month) and a specific rate for EO 13706 ($5.09 per hour, $203.60 per week/$882.27 per month).

It also details:

• Vacation: 2 weeks after 1 year, 3 weeks after 8 years, 4 weeks after 15 years of service.
• Holidays: A minimum of eleven paid holidays per year, with a list of common holidays provided.
• Hazardous Pay Differentials: An 8% differential for high-hazard positions and a 4% differential for low-hazard positions involving ordnance or explosives.
• Uniform Allowance: Requirements for contractors to furnish uniforms or reimburse employees for costs, including maintenance.

This document does not specify contract type, period of performance, or estimated value, as it is a wage determination that would be incorporated into a larger contract solicitation.

This document does not contain proposal submission or evaluation instructions. It serves as a mandatory attachment for solicitations requiring compliance with the Service Contract Act.

This document does not specify eligibility or set-aside requirements. However, it notes that Executive Order 13658 applies to contracts awarded between January 1, 2015, and January 29, 2022, requiring a minimum hourly wage of $13.30 (or the rate on this determination, if higher) for 2025.

• The document includes specific notes regarding computer employees, air traffic controllers, and weather observers, detailing conditions under which the wage determination may not apply or when night/Sunday pay differentials are applicable.
• It outlines the conformance process for additional classifications and wage rates not listed in the determination, requiring contractors to submit SF-1444 forms.
• The Service Contract Act Directory of Occupations is referenced for job duty descriptions.

Form / Attachment / Pricing Sheet

This document is a U.S. Department of Labor Wage Determination (WD) for the Service Contract Act, specifically Wage Determination No. 2015-4487, Revision No. 29, with a last revision date of December 3, 2025. It establishes the minimum wage rates and fringe benefits required for various occupations performing contract work in the Georgia counties of Bibb, Crawford, Jones, Monroe, and Twiggs.

• Occupational Listings: Provides a comprehensive list of job titles, corresponding occupation codes, and their required minimum hourly wage rates.
• Fringe Benefits: Indicates that fringe benefits are required and follow the occupational listing, though specific fringe benefit amounts are detailed separately.
• Executive Orders: Notes the applicability of Executive Order (EO) 13706 (Paid Sick Leave) and EO 13658 (Minimum Wage) for federal contractors, outlining specific requirements and minimum wage rates for 2025.
• Vacation and Holidays: Details the minimum paid vacation and holiday provisions required for employees.
• Conformance Process: Outlines the procedure for contractors to request additional classifications and wage rates if an occupation is not listed in the determination.

This wage determination is crucial for bidders to accurately estimate labor costs for their proposals. It ensures that all covered employees are paid at least the specified minimum wage rates and receive the required fringe benefits, vacation, and holiday pay. Bidders must review the listed occupations to determine which apply to their proposed services and ensure their cost proposals reflect these labor standards. Failure to comply can lead to violations of the Service Contract Act.

Solicitation / RFP / RFQ

This document is a U.S. Department of Labor Wage Determination (No. 2015-4379, Revision No. 31) for the Service Contract Act, applicable to the area of North Carolina County of Wayne. It outlines the minimum wage rates and fringe benefits required for various occupations that may be employed under a contract in this region.

This document specifies the minimum hourly wage rates for a wide range of occupational classifications, including but not limited to:

• Administrative Support and Clerical Occupations
• Automotive Service Occupations
• Furniture Maintenance and Repair Occupations
• General Services and Support Occupations
• Health Occupations
• Information and Arts Occupations
• Information Technology Occupations
• Instructional Occupations
• Laundry, Dry-Cleaning, Pressing and Related Occupations
• Machine Tool Operation and Repair Occupations
• Mechanics and Maintenance and Repair Occupations
• Miscellaneous Occupations
• Plant and System Operations Occupations
• Protective Service Occupations
• Recreation Occupations
• Stevedoring/Longshoremen Occupational Services
• Technical Occupations
• Transportation/Mobile Equipment Operation Occupations

It also details required fringe benefits, including Health & Welfare benefits at $5.55 per hour (or $222.00 per week/$962.00 per month) and a specific rate for EO 13706 ($5.09 per hour, $203.60 per week/$882.27 per month).

This document does not specify contract type, period of performance, or estimated value, as it is a wage determination, not a solicitation itself. However, it notes that Executive Order 13706 (Paid Sick Leave) and Executive Order 13658 (minimum wage) may apply to contracts awarded on or after specific dates.

This document does not contain proposal submission or evaluation criteria. It serves as a baseline for wage and benefit requirements for covered contracts.

This document does not specify eligibility or set-aside requirements. It is a general wage determination for the specified geographic area.

• A "Conformance Process" is outlined for contractors needing to classify employees in occupations not listed in this determination.
• Specific footnotes provide additional details for Computer Employees and Air Traffic Controllers/Weather Observers regarding pay differentials and exemptions.
• Information on vacation and holiday entitlements is also provided.

Other / Unclassified

This document is a U.S. Department of Labor, Employment Standards Administration, Wage and Hour Division "Register of Wage Determinations Under the Service Contract Act." It provides a list of occupational classifications and their corresponding minimum wage rates and fringe benefits applicable to contracts in Penobscot County, Maine. The document includes a revision number and the date of the last revision.

This document is crucial for any bidder responding to a Service Contract Act (SCA) covered contract. It establishes the minimum wage rates and fringe benefits that must be paid to various categories of service employees working on the contract. Bidders must consult this document to accurately calculate labor costs and ensure compliance with federal regulations when preparing their proposals. It details specific wage rates for numerous occupations, including administrative support, automotive services, health occupations, technical occupations, and more. The document also outlines requirements for paid sick leave, vacation, and holidays, as well as provisions for hazardous pay and uniform allowances. Additionally, it explains the process for requesting additional classifications and wage rates if a required occupation is not listed.

Form / Attachment / Pricing Sheet

This document is a "REGISTER OF WAGE DETERMINATIONS UNDER THE SERVICE CONTRACT ACT" issued by the U.S. Department of Labor, Employment Standards Administration, Wage and Hour Division. It provides the minimum wage rates and fringe benefits required for various occupations when performing contract work subject to the Service Contract Act in the specified geographic area (New York Counties of Erie, Niagara).

• Lists numerous occupational codes and titles.
• Specifies the minimum hourly "RATE" for each occupation.
• Indicates that "Fringe Benefits Required Follow the Occupational Listing."
• Includes notes on Executive Orders 13706 (Paid Sick Leave) and 13658 (minimum wage rate adjustments).
• Details vacation and holiday policies.
• Provides information on hazardous pay differentials and uniform allowances.
• Outlines the process for requesting additional classifications and wage rates (Conformance Process).

This document is crucial for bidders to understand the labor costs associated with performing the contract. It establishes the minimum wages and benefits that must be paid to employees working on the contract, directly impacting the cost proposal. Bidders must ensure their proposed wages and benefits meet or exceed these requirements to be compliant.

Form / Attachment / Pricing Sheet

This document is a Wage Determination (WD) issued under the Service Contract Act, specifically Wage Determination No. 2015-4281, Revision No. 35, dated 12/03/2025. It establishes the minimum wage rates and fringe benefits required for various occupations performing contract work in the specified geographic areas.

• Geographic Area: District of Columbia Statewide, Maryland Counties of Charles and Prince George's, and Virginia Counties of Alexandria, Arlington, Fairfax, Falls Church, Fauquier, Loudoun, Manassas, Manassas Park, Prince William, and Stafford.
• Occupational Listings: Provides a comprehensive list of occupations with corresponding wage rates and footnotes.
• Fringe Benefits: Indicates that fringe benefits are required and follow the occupational listing.
• Executive Orders: Notes the applicability of Executive Order (EO) 13706 (Paid Sick Leave) and EO 13658 (Minimum Wage) for covered contracts, outlining specific requirements and minimum rates for 2025.
• Vacation and Holidays: Details paid vacation (2, 3, or 4 weeks based on service years) and a minimum of eleven paid holidays per year.
• Footnotes: Explains specific conditions for certain occupations, such as Computer Employees (footnote 1) and Air Traffic Controllers/Weather Observers (footnote 2).
• Conformance Process: Outlines the procedure for requesting additional classifications and wage rates if a required occupation is not listed.

This wage determination is crucial for bidders as it dictates the minimum labor costs for contract performance. Bidders must ensure their proposed wages and fringe benefits meet or exceed these requirements to be compliant. It directly impacts the cost proposal and the ability to successfully perform the contract. The document also specifies requirements for paid sick leave and minimum wages under relevant Executive Orders.

Other / Unclassified

This document is a U.S. Department of Labor, Employment Standards Administration, Wage and Hour Division "Register of Wage Determinations Under the Service Contract Act." It lists various occupations and their corresponding minimum hourly wage rates and fringe benefits for a specific geographic area (Pennsylvania Counties of Allegheny, Armstrong, Beaver, Butler, Fayette, Washington, Westmoreland). It also includes notes on Executive Orders related to paid sick leave and minimum wage for federal contractors, as well as details on vacation and holiday entitlements.

This document is crucial for potential bidders on federal contracts subject to the Service Contract Act. It provides the legally mandated minimum wage rates and fringe benefits that must be paid to employees performing work under such contracts within the specified geographic area. Bidders must use this information to accurately calculate labor costs for their proposals, ensuring compliance with federal regulations. It also outlines specific conditions for applying these wage rates, including conformance processes for unlisted occupations and details on hazardous pay differentials and uniform allowances.

Form / Attachment / Pricing Sheet

This document is a Wage Determination issued by the U.S. Department of Labor, Wage and Hour Division, under the Service Contract Act. It establishes the minimum wage rates and fringe benefits required for various occupations performing work in specific geographic locations.

• Geographic Scope: Applies to HAMPDEN COUNTY, MASSACHUSETTS, including specific cities and towns.
• Occupational Listings: Provides a comprehensive list of job classifications (e.g., Administrative Support, Automotive Service, Health Occupations, Information Technology) with corresponding minimum hourly wage rates.
• Fringe Benefits: Indicates that fringe benefits are required and follow the occupational listings. Specific details on Health & Welfare benefits are provided, including rates for regular contracts and those covered by Executive Order 13706.
• Executive Orders: Notes the applicability of Executive Order 13706 (Paid Sick Leave) and Executive Order 13658 (Minimum Wage) for federal contractors.
• Vacation and Holidays: Outlines paid vacation and holiday provisions for employees.
• Hazardous Pay Differential: Details differential pay for work involving ordnance, explosives, and incendiary materials.
• Uniform Allowance: Specifies requirements for providing uniforms and reimbursement for cleaning.
• Conformance Process: Explains the procedure for requesting additional classifications and wage rates not listed in the determination.

This document is crucial for bidders responding to solicitations that fall under the Service Contract Act and cover the specified geographic area. It dictates the minimum labor costs that must be factored into proposals, ensuring compliance with federal labor laws. Bidders must ensure their proposed wages and benefits meet or exceed these requirements.

Solicitation / RFP / RFQ

This document is a U.S. Department of Labor Wage Determination (No. 2015-4217, Revision No. 32) for the Service Contract Act, applicable to the state of Delaware, specifically Delaware County of Kent. It outlines the minimum wage rates and fringe benefits required for various occupations performing contract work covered by the Service Contract Act.

This document lists numerous occupational classifications, each with a corresponding minimum hourly wage rate. It also specifies required fringe benefits, including Health & Welfare ($5.55 per hour or $222.00 per week) and paid sick leave provisions as mandated by Executive Orders (EO 13706 and EO 13658).

• The wage determination is effective for contracts awarded on or after January 1, 2015, and applies to work performed in 2025, with annual adjustments to minimum wage rates.
• It details paid sick leave accrual (1 hour per 30 hours worked, up to 56 hours annually) and usage requirements.
• It outlines vacation benefits (2 weeks after 1 year, 3 weeks after 5 years, etc.) and 12 paid holidays per year.

This document does not contain proposal submission or evaluation criteria. It serves as a mandatory requirement for contractors to adhere to the specified wage rates and benefits.

This document does not specify eligibility or set-aside requirements. It applies to all contractors performing covered work.

• A "Conformance Process" is described for situations where a required job classification is not listed in the wage determination. Contractors must follow a specific procedure to establish appropriate wage rates and classifications.
• Hazardous pay differentials (8% for high hazard, 4% for low hazard) and uniform allowance requirements are also detailed.

Wage Determination

This document is a Wage Determination issued under the Service Contract Act, specifically Wage Determination No. 2015-4191, Revision No. 31, with the last revision date of 12/03/2025. It establishes the minimum wage rates and fringe benefits required for various occupations performing work in Burlington, Camden, and Gloucester Counties, New Jersey.

• Occupational Wage Rates: The document lists numerous occupations with their corresponding minimum hourly wage rates.
• Fringe Benefits: It specifies required fringe benefits, including:
  • Health & Welfare: $5.55 per hour (or $222.00 per week / $962.00 per month).
  • Health & Welfare (EO 13706): $5.09 per hour (or $203.60 per week / $882.27 per month).
  • Vacation: 2 weeks paid vacation after 1 year, 3 weeks after 8 years, 4 weeks after 15 years.
  • Holidays: A minimum of eleven paid holidays per year.
• Hazardous Pay Differential: An 8% differential for high-hazard positions and a 4% differential for low-hazard positions involving ordnance or explosives.
• Uniform Allowance: Requirements for contractors to furnish uniforms or reimburse employees for their cost, including cleaning and maintenance ($3.35 per week).

This document does not involve proposal submissions or evaluation criteria. It serves as a mandatory requirement for contractors performing covered services.

This document applies to all contracts subject to the Service Contract Act within the specified geographic area. It also notes the applicability of Executive Orders 13706 (Paid Sick Leave) and 13658 (Minimum Wage) for covered contractors.

• The document includes specific notes regarding computer employees, air traffic controllers, and weather observers regarding night and Sunday pay.
• It outlines the conformance process for additional classifications and wage rates not listed in the determination.
• The Service Contract Act Directory of Occupations is referenced for job duty descriptions.

Other / Unclassified

This document is a "Register of Wage Determinations Under the Service Contract Act" issued by the U.S. Department of Labor, Wage and Hour Division. It provides a detailed listing of occupational codes, titles, and corresponding minimum hourly wage rates and fringe benefits applicable to contracts in Rockingham County, New Hampshire. The document includes specific wage rates for a wide range of occupations, from administrative support and clerical roles to health, technical, and transportation occupations.

This document is crucial for bidders responding to Service Contract Act (SCA) covered solicitations. It establishes the minimum wage and fringe benefit rates that must be paid to service employees performing work under such contracts. Bidders must ensure their proposed labor costs align with these determined rates to be compliant. The document also outlines Executive Orders related to paid sick leave (EO 13706) and minimum wage (EO 13658) that may apply, along with details on vacation and holiday entitlements. It also describes the process for requesting additional classifications and wage rates if a required occupation is not listed.

• Applicability: Applies to Service Contract Act (SCA) covered contracts in Rockingham County, New Hampshire.
• Minimum Wage Rates: Provides specific hourly wage rates for numerous occupations.
• Fringe Benefits: Details required fringe benefits, including Health & Welfare rates.
• Executive Orders: Mentions applicability of EO 13706 (Paid Sick Leave) and EO 13658 (Minimum Wage).
• Vacation & Holidays: Outlines paid vacation and holiday provisions.
• Conformance Process: Explains how to request wage rates for unlisted occupations.