MMIII CABLE ASSEMBLY

Amendment / Modification

This amendment extends the due date for offers.

• The due date for offers has been extended.

• The original due date of 24 April 2026 has been extended to 22 May 2026.

Amendment / Modification

• This amendment extends the due date for offers.

• The due date for receipt of offers has been changed.

• The original due date of 20 March 2026 has been extended to 24 April 2026.

Amendment / Modification

• The due date for offers has been extended.

• The due date for receipt of offers is extended from 11 March 2026 to 20 March 2026.

• The deadline for submitting proposals or quotes has been extended to 20 March 2026.

Amendment / Modification

This amendment modifies the solicitation by changing the quantities for several CLINs:

• CLIN 0001AC: Quantity changed from 39 EA to 49 EA.
• CLIN 0001AD: Quantity changed from 40 EA to 50 EA.
• CLIN 0002AC: Quantity changed from 39 EA to 49 EA.
• CLIN 0002AD: Quantity changed from 40 EA to 50 EA.

This amendment affects the quantities specified for CLINs 0001AC, 0001AD, 0002AC, and 0002AD.

Bidders should update their offers to reflect the revised quantities for the specified CLINs. The effective date of this amendment is February 10, 2026. The original solicitation number is SPRHA226R0088, dated February 2, 2026.

Statement of Work (SOW) / Performance Work Statement (PWS)

This document outlines the requirements for preservation, packaging, and marking of materials for military shipments.

• Adherence to AFMC Form 158, Packing Requirements, DoD Military Standards, ASTM International, ANSI, DoD specifications, and FAR/DAR Clauses.
• Development of military packaging using MIL-STD-2073-1, including specific codes and potential special packaging instructions for hazardous materials.
• Application of commercial packaging standards (ASTM D3951) when prescribed.
• Use of MIL-STD-129 for military marking, labels, and identification for shipment and storage, including DD Form 1574 or 1574-1 tags.
• Compliance with International Standards for Phytosanitary Measures (ISPM 15) for wood packaging material used in international trade.
• Adherence to electrostatic discharge (ESD) protective packaging procedures (MIL-STD-2073-1, MIL-HDBK-773, ANSI/ESD S20.20, ESD TR20.20) for sensitive electronic components.
• Application of MIL-STD-147 for palletized unit loads and MIL-STD-1660 for explosive unit loads.
• Use of MIL-STD-648 for specialized shipping containers.
• Preparation, labeling, certification, and compliance with regulations for hazardous materials shipments (ICAO, CFR Title 49, IATA, IMDG, AFMAN24-604).
• Preparation and submission of Safety Data Sheets (SDS) per FED-STD-313.
• Use of the Special Packaging Instructions Retrieval & Exchange System (SPIRES) for packaging requirements.
• Management of reusable shipping containers.
• Reporting discrepancies using Web Supply Discrepancy Report (WebSDR).
• Accessing specifications and standards via the ASSIST website.

Not specified in this document.

• Utilization of the most recent revisions of applicable government packaging documents.
• Specific contact information for AFSC (406 SCMS/GULAA) is provided for inquiries.

Solicitation / RFP / RFQ

This solicitation is for "Power, Distribution and Specialty Transformer Manufacturing." It is a Request for Proposal (RFP) and is a 100% small business set-aside.

• The solicitation details multiple line items for various cable assemblies and production articles.

• Specific requirements include First Article Test Reports (FATR) for certain items, IAW MIL-STD-130 for physical item markings, and IUID (Unique Item Identifier) requirements.

• On-Time Delivery (OTD) Improvement Initiative requirements are established, with a focus on improving OTD.

• Specific clauses address "Manufacturing PhaseOut or Discontinuation of Production," "Contractor Retention of Supply Chain Traceability Documentation," and "Packaging and Marking" per MIL-STD-130 and MIL-STD-129.

• The contract type is not explicitly stated but implied to be Firm Fixed Price based on line item details.

• The period of performance is not explicitly stated, but offers are due by March 11, 2026, and offers must be held firm for 120 days.

• Estimated value is not stated.

• Offers are due by March 11, 2026, at 11:59 PM.

• Proposals will be evaluated based on "Price or Cost" as the most important factor, with all other factors being "Significantly Less Important than Cost or Price."

• First Article testing costs will be a factor in the evaluation.

• This acquisition is a 100% small business set-aside.

• Associated documents include CDRLs for First Article Test Reports and Engineering Data Lists.

• The solicitation references various FAR and DFARS clauses related to quality assurance, inspection, acceptance, packaging, marking, and payment instructions (WAWF).

Other / Unclassified

This memorandum from the Department of the Air Force (OO-ALC/ENLEB) provides critical guidance to vendors and contractors regarding the handling of "Unmarked Engineering Data." It mandates that any unmarked drawings within a data set must be treated as having a "DISTRIBUTION D" statement, restricting distribution to DoD and US DoD contractors only, due to critical technology. The document includes a stern warning about severe criminal penalties for violating export control laws, specifically the Arms Export Control Act and the Export Administration Act.

It also references an Attachment 1, which contains detailed instructions for controlling export-controlled technical data. Furthermore, the memorandum outlines penalties for unlawful export (including imprisonment and substantial fines), prohibits unauthorized dissemination by "qualified U.S. contractors" (which could lead to disqualification), and clarifies that the U.S. Government assumes no liability for patent infringement, data accuracy, or damages resulting from the use of the technical data. It also notes that commercial use of the data may require a license.

This document is crucial for potential bidders as it establishes strict requirements for the handling and dissemination of technical data, particularly unmarked engineering drawings, received from the Air Force. Bidders must understand the severe legal and contractual consequences of non-compliance with export control regulations and distribution limitations. It highlights the importance of reviewing Attachment 1 for specific control instructions and understanding the government's disclaimers regarding the provided data. Questions should be directed to the provided point of contact.

Form / Attachment

This document is a Contract Data Requirements List (CDRL), DD Form 1423-1, which formally specifies the requirement for a Counterfeit Prevention Plan (Data Item A002). It details the submission, content, and handling instructions for this plan, which is a mandatory deliverable for the contractor.

• Data Item: A002 Counterfeit Prevention Plan, related to specific "Special Purpose, Electrical" items (NIINs 004356075 and 000099603).
• Submission Schedule:
  • Initial draft Counterfeit Prevention Plan due within 60 days of contract award.
  • Final Counterfeit Prevention Plan due 15 days after receipt of government comments on the draft.
• Format: Electronic submission required, preferably in MS Office 2016 format. Documents not compatible must be delivered in Adobe Acrobat.
• Marking Requirements: All data submittals must be marked with "CUI" (Controlled Unclassified Information) as a header and footer, and include specific cover page details regarding control, category, and distribution.
• Distribution & Export Control: The document contains technical data subject to the Arms Export Control Act and Export Control Reform Act, with distribution authorized only to Department of Defense and U.S. DoD contractors.

This CDRL is crucial for potential bidders as it outlines a significant post-award deliverable. Bidders must account for the development, submission, and compliance requirements of the Counterfeit Prevention Plan in their proposals and project planning. Understanding the specific marking, format, and export control restrictions is essential for successful contract execution.

Amendment / Modification (Engineering Data Requirements Attachment)

This document, designated as Attachment "A" and Revision 1.0, provides specific engineering data requirements and procurability information for a particular cable assembly, including a cataloging change.

• Part Identification: The document details the "Cable Assembly, Special Purpose, Electrical Branched (HRU 875/B) W5D" with Part Number 69E49478G2 and National Stock Number 6150-004356075.

• Criticality Code Update: The 'CRITICALITY CODE' in SAW Form 761 has been changed from 'X' to 'M', indicating a cataloging change.

• Engineering Data List (EDL): A comprehensive, multi-tiered list is provided, detailing various components, documents, and their supportability/procurability. This includes:

  • Specific part numbers, descriptions, and associated documents.
  • Notes on document availability (e.g., in ATEAMS).
  • Instructions for procurement, including approved alternative parts or manufacturers (e.g., Sunbank, Amphenol, Mouser, TE Connectivity).
  • Information on superseding parts, inactive documents, or specific usage instructions (e.g., "DO NOT USE. USE THE SAME PART NUMBER OF R3701.").
  • Minimum order requirements for certain components.

• Bidders must incorporate the updated criticality code for the specified part into their understanding of the requirement.

• The detailed Engineering Data List (EDL) is crucial for accurate material sourcing, technical compliance, and cost estimation for the Cable Assembly.

• The "Supportability/Comments" column in the EDL is critical for identifying approved alternatives, understanding potential procurement challenges, and ensuring compliance with specified components and documentation.

Form / Attachment

This document, titled "ENGINEERING DATA REQUIREMENTS (ATTACHMENT "A")", provides detailed instructions and a comprehensive Engineering Data List (EDL) for the manufacture of a specific cable assembly. It also includes critical part procurability information.

• Product: Instructions are provided for the manufacture of a CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICAL W5G (HRU 889/B), identified by Part Number 69D49203G3 and National Stock Number 6150-000099603.
• Modification: A cataloging change has been initiated for the 'CRITICALITY CODE' in SAW Form 761, changing it from 'X' to 'M'.
• Engineering Data List (EDL): A detailed EDL is attached, listing numerous components required for the assembly. For each component, it provides part numbers, descriptions, original and current CAGE codes, and extensive notes on supportability and procurability. These notes include information on availability in ATEAMs, lead times (e.g., "340-360 days lead time"), alternative sources, and specific vendor details.

This attachment is essential for bidders to understand the precise technical specifications, required components, and potential supply chain challenges associated with manufacturing the CABLE ASSEMBLY. The detailed EDL and procurability notes are crucial for accurate proposal preparation, sourcing strategies, and costing. The change in 'CRITICALITY CODE' may also have implications for quality assurance or other compliance requirements.

Form / Attachment / Pricing Sheet

This document is an Engineering Data List (EDL) that serves as a comprehensive catalog of engineering drawings, specifications, and related documents. It is furnished as an attachment to a solicitation to provide potential bidders with the technical documentation relevant to the procurement of a "CABLE ASSEMBLY, POWE" for the "LGM-30" end item. Bidders should use this list to identify and understand the specific technical requirements and standards applicable to the project.

• The list details numerous engineering drawings and accompanying document numbers, revisions, and descriptions (NOUN).
• Each entry includes remarks, often referencing specific Engineering Orders (EOs) and their effective dates, indicating revisions or specific instructions.
• The listed items cover a broad range of technical aspects, including:
  • Various cable assemblies, harness assemblies, and associated components.
  • Engineering and quality standards for electronic equipment.
  • Requirements for wire and lead preparation, soldering, termination, and crimping.
  • Material specifications for proprietary solvents, polyurethane compounds, and polysulfide potting.
  • Connectors (e.g., electrical, jam nut mount, bayonet coupling) and related hardware.
  • Insulation sleeving, wiring specifications (e.g., radiation resistant, point-to-point), and identification marking.
  • Standards for printed wiring boards (multilayer, plated-through) and microwave stripline board fabrication and assembly.
  • Handling procedures for electronic parts and assemblies.
  • Lubricants, packing standards, and internal environmental criteria.
• The "FURN CODE" column consistently indicates 'S', meaning all listed documents are "FURNISHED WITH SOLICITATION".

This Engineering Data List is critical for bidders to thoroughly understand the detailed technical specifications, standards, and components required for the "CABLE ASSEMBLY, POWE" for the LGM-30. It directly informs the scope of work, material requirements, manufacturing processes, and quality assurance standards that must be adhered to. Bidders must review this list to ensure their proposed solutions, capabilities, and compliance strategies align with the referenced engineering data, which will be provided as part of the solicitation. This document is essential for assessing technical compliance, accurately estimating costs, and preparing a robust and technically sound proposal.

Form / Attachment / Pricing Sheet

This document is an Engineering Data List (EDL) that provides a comprehensive catalog of components, assemblies, and related documentation required for the "CABLE ASSEMBLY, SPEC" end item, associated with the ICBM program. It serves as a reference for procurement, manufacturing, and quality assurance by detailing specific part numbers, manufacturers, and associated engineering drawings or specifications.

• Part Identification: Lists specific part numbers (DOC NUM), manufacturer CAGE codes, and manufacturer names.
• Engineering Data: References engineering drawing numbers, revision levels, and sheet numbers.
• Furnished Data Codes: Indicates how the data is supplied (e.g., 'S' for furnished with solicitation).
• Remarks: Includes specific notes, engineering change orders (ECOs), or additional requirements related to each item.
• End Item: Identifies the "CABLE ASSEMBLY, SPEC" for the ICBM program.

This EDL is crucial for bidders as it details the specific components and materials that may be required for the "CABLE ASSEMBLY, SPEC" end item. It provides a baseline for understanding the technical requirements, potential suppliers, and the necessary documentation for manufacturing or assembling these components. Bidders should review this list to assess their capability to meet the specified requirements and to identify any parts they may need to procure or manufacture.

Form / Attachment / Pricing Sheet

This document is a Contract Data Requirements List (CDRL) that specifies data items to be delivered by a contractor. It outlines the requirements for specific data items, including their titles, subtitles, and the contract references that generate the requirement.

• Data Item Title: Test/Inspection Report (A001)
• Subtitle: First Article Test Report
• Authority: DI-NDTI-80809B/T
• Contract Reference: PR# FD20202600088
• Requiring Office: 414 SCMS/GUEA
• Remarks: Provides specific details for the "First Article" item, including material requirements, processing, and certification. It also specifies marking requirements for "CUI" (Controlled Unclassified Information) and outlines distribution limitations.
• Distribution Statement: D, indicating distribution is authorized to DoD and DoD contractors only, with specific contact information for inquiries.
• Submission Instructions: The report is to be submitted concurrently with the "First Article" item, either in the shipping container or separately. Specific mailing addresses for submission are provided.

This CDRL details the specific reporting and documentation requirements for the "First Article" test. Bidders need to understand these requirements to ensure they can meet the contract's data delivery obligations, including the format, content, and submission procedures for the Test/Inspection Report and associated materials.