Nickel Niobium

Statement of Work (SOW)

The objective of this procurement is to establish an indefinite delivery requirements type contract to allow the Defense Logistics Agency (DLA) to purchase nickel niobium alloy as needed over a five-year ordering period.

The contractor will provide management, services, personnel, and documentation for the supply of nickel niobium alloy. The maximum quantities to be purchased over five years are detailed, totaling 1,446,114.27 lbs.

• Alloy Specifications: Nickel niobium alloy must meet specific chemical composition limits (e.g., Nb 58-72%, Al max 1.5%, Fe max 0.6%).

• Physical Form: Material must be lump or flake, with dimensions under 50 mm, and a maximum of 10% retained on a sieve.

• Lot Size: Each lot must be approximately 19,000 kg, contained in 76 drums (approx. 250 kg per drum). Co-mingling of production lots is not permitted.

• Compliance: Material must be non-radioactive, non-licensable by the NRC, and contain less than 0.05% combined thorium and uranium.

• Sampling: Government will witness sampling. Contractors must submit a sampling plan with their proposal and provide 60 days' notice before sampling activities. Three equivalent samples are required per lot (contractor, government, third-party lab).

• Testing: An independent, ISO 17025 certified third-party laboratory must perform chemical characterization according to specified methods and instrumentation. A draft testing plan is due with the proposal, and a final plan within 10 business days of award.

• A COA must be provided with each production lot, submitted electronically in PDF format to the government for review and acceptance prior to shipping.

• The COA must certify material compliance with SOW specifications and include detailed analytical results, methodology, and laboratory information.

• Material must be packaged in new UN 1A2 compliant steel drums (55-gallon capacity), with specific requirements for drum construction, closure, and coating.

• Pallets must be new, hardwood, meeting specific dimensions and load capacity (ASTM D6199-18a, ISPM 15 compliant).

• All containers and ingots must be labeled with detailed information including commodity name, weight, lot number, contract number, and a 3D barcode.

• Contractor is responsible for transportation, carrier, and insurance to the DLA Strategic Materials Scotia Depot in Scotia, NY.

• Deliveries must be scheduled in writing with the Quality Assurance Specialist (QAS) at least 10 business days in advance, after COA acceptance.

• DLA will perform visual inspections. The government reserves the right to sample and test each lot.

• The QAS will provide written acceptance/rejection notification within 20 calendar days of delivery. Invoices can only be submitted after acceptance.

Estimated for one base year (Feb 16, 2026 – Feb 15, 2027) and four option years (ending Feb 15, 2031).

Solicitation / RFP / RFQ

This is a combined synopsis/solicitation (RFP SP8000-26-R-0006) for commercial products to establish an indefinite delivery requirements type contract for the purchase of nickel niobium alloy as needed by the Defense Logistics Agency (DLA). This procurement is unrestricted under NAICS code 331410 (Nonferrous Metal (except Aluminum) Smelting and Refining), with a small business size standard of 1,000 employees.

• The primary deliverable is nickel niobium alloy.

• Offerors must refer to the attached Statement of Work (SOW) for complete details.

• Technical proposals must outline the approach to meeting all SOW requirements, including a previously completed certificate of analysis (COA), a draft safety data sheet (SDS), a sampling plan, and a draft testing plan.

• The draft SDS, sampling plan, and testing plan each have a page limit of 10 pages.

• Contract Type: Firm fixed price indefinite delivery requirements type contract.

• Ordering Period: February 16, 2026 EST through February 15, 2031 EST.

• Multiple awards will NOT be made; award will be made to a single responsible offeror.

• Proposal Submission Deadline: 5:00 PM EDT, December 15, 2025, via email.

• Questions Deadline: 10:00 AM EDT, November 25, 2025, via email.

• Evaluation Criteria: Proposals will be evaluated using the Lowest Price Technically Acceptable (LPTA) process. Factors include technical approach (acceptable/unacceptable), past performance (acceptable/unacceptable), and cost/price (accuracy, fairness, reasonableness, completeness).

• Technical Evaluation: Focuses on compliance with solicitation instructions and SOW requirements, including draft sampling and test plans.

• Past Performance: Evaluated via CPARS and other government systems; neutral rating if no data exists.

• Pricing: Evaluated for accuracy, fairness, reasonableness, and completeness.

• Submission Format: Technical response limited to 10 pages. Price quote in Excel format using the provided CLIN Structure spreadsheet.

• This procurement is unrestricted.

• All responsible offerors (foreign and domestic) are encouraged to submit proposals.

• DFARS clause 252.225-7008 (Restriction on Acquisition of Specialty Metals) applies.

• Vendors are responsible for confirming quote receipt.

• Late quotes may not be considered.

• A consolidated list of questions and answers will be posted to SAM.gov.

Solicitation / RFP / RFQ

This document outlines the evaluation factors for the procurement of nickel niobium alloy, which is projected to result in a single indefinite delivery requirements type contract (IDRTC).

• Selection Process: Lowest Price Technically Acceptable (LPTA).

• Evaluation Factors: Proposals will be evaluated on Technical Approach, Past Performance, and Cost/Price.

  • Technical: Rated Acceptable/Unacceptable. Evaluated based on compliance with solicitation instructions and SOW requirements, including draft sampling and test plans. Vendors must submit a technical response (max 10 pages), a previously completed Certificate of Analysis (COA), a draft Safety Data Sheet (SDS) (max 10 pages), a draft sampling plan (max 10 pages), and a draft testing plan (max 10 pages).
  • Past Performance: Rated Acceptable/Unacceptable. Evaluated based on relevancy, recency (within the past three years), and quality of past performance information from CPARS and other government data systems. If no data exists, a neutral rating (considered acceptable) will be assigned.
  • Price: Evaluated for accuracy, fairness, reasonableness, and completeness. Pricing must be submitted in an unprotected Excel format using the attached CLIN structure spreadsheet with intact formulas and two decimal places for dollar values.

• Contract Type: Indefinite Delivery Requirements Type Contract (IDRTC).

• The government may use quote information from one factor to assess other factors.

• Discussions with vendors after proposal receipt are at the government's discretion.

Form / Attachment / Pricing Sheet

This document, an Excel spreadsheet named "Nickel Niobium CLIN Structure.xlsx", outlines the proposed CLIN (Contract Line Item Number) structure for the procurement of Nickel Niobium Alloy and associated Material Testing. It details the estimated quantities and unit costs for a base year and four option years.

• CLINs: Differentiates between the Nickel Niobium Alloy (e.g., 0001, 1001) and Material Testing (e.g., 0002, 1002) for each contract period.
• Cost Per Pound ($): Provides estimated unit costs for the Nickel Niobium Alloy.
• Amount (LBS): Indicates the government's estimated maximum quantity in pounds for the alloy. These amounts are not to be adjusted by vendors.
• Total Cost: Calculated fields for the total cost of each CLIN and for each contract year (Base, Option Year 1-4).
• Instructions: Specific guidance for vendors on inputting costs, validating auto-calculated totals, and limiting decimal places to two.
• Alternative CLIN Structure: Vendors may propose an alternative CLIN structure and unit of measure, but pricing must be provided for all years.

This document is crucial for bidders to understand the anticipated cost structure and quantity requirements for the Nickel Niobium Alloy and testing services. It provides the framework for pricing proposals and highlights the government's estimated quantities. Bidders should pay close attention to the instructions regarding cost input, validation, and the allowance for alternative CLIN structures while ensuring pricing covers all contract years.