Z1DA--Pre-Solicitation Notice No. 36C26126R0049 Project No. 570-23-223, Renovate First Floor for Acute Respiratory Clinic at Fresno VA Medical Center

Statement of Work (SOW) / Performance Work Statement (PWS)

To renovate the existing space at the front of Building 1, Main Hospital, to create an Acute Respiratory Clinic (ARC). The clinic will serve a dual function: expansion of Primary Care space during normal operations and an isolated suite with controlled access and negative pressure HVAC during seasonal flu or pandemic measures.

• Provide all labor, materials, supplies, tools, equipment, supervision, and construction services.

• Architectural work includes demolition and installation of new walls, doors, ceilings, flooring, and provisions for equipment, with a focus on infection control.

• Mechanical work includes demolition of existing ductwork, installation of new dedicated exhaust fans on the OPC penthouse roof, routing of new exhaust ductwork, and reinstallation of ductwork within the space with specific controls.

• Re-routing of existing chilled water lines to recapture space.

• Structural reinforcement of OPC penthouse decking.

• Plumbing work for reconfigured rooms in the basement.

• Electrical work for new lighting, receptacles, telecom, low voltage equipment, and new power accommodations for mechanical equipment.

• Compliance with VA specifications, NEC, NFPA, applicable city, county, state, and federal regulations/codes, and OSHA standards.

• Adherence to Infection Control Risk Assessment (ICRA), CLASS IV, and IC standards.

• Construction must comply with plans, specifications, and applicable VA design guides.

• Period of Performance: 224 consecutive calendar days from Notice to Proceed.

• Location: Fresno, CA (VA facility).

• A site visit is required prior to bidding.

• Contractor must coordinate with the Contracting Officer Representative (COR) for all work, including utility shutdowns (72 hours notice for major shutdowns, 2 weeks notice).

• Normal work hours are 8:00 AM to 4:00 PM, Monday-Friday, with requests for alternate hours to be submitted in writing.

• Compliance with City of Fresno Municipal Code for Construction Noise.

• Housekeeping: Daily cleanup of work areas.

• Fire Watch: Required for impairments over 4 hours in a 24-hour period.

• Security: Contractors must wear security badges.

• Parking: Contractor vehicles are prohibited in VA parking lots.

• Tuberculosis (TB) screening for workers may be required.

• OSHA 10-hour training for construction workers and OSHA 30-hour training for safety manager/superintendent.

• Infection Control (IC) training required annually for all personnel.

• Fire and smoke wall penetrations must be fireproofed.

• IT installation must be PANDUIT certified.

• Deliverables include O&M Manuals, As-Built drawings (CAD and PDF), applicable permits, and a minimum one-year warranty.

• Budget for the designed construction portion is $2,080,000.

Source Sought Announcement

This is a Source Sought Announcement for Project 570-23-223, "Renovate Building 1, First Floor for Acute Respiratory Clinic" at the Fresno VA Medical Center. The government is conducting market research to identify interested and capable vendors for a firm-fixed-price construction project. No solicitation is currently available.

• Scope: Renovate existing space in Building 1 to create an Acute Respiratory Clinic (ARC) with a secondary front entrance. The clinic will serve a dual function: expansion of Primary Care space during normal operations and isolation with controlled access and negative pressure HVAC during seasonal flu or pandemic measures.
• Magnitude: Estimated project value is between $2,000,000.00 and $5,000,000.00.
• Period of Performance: Approximately 224 calendar days after Notice to Proceed (NTP).
• NAICS Code: 236220 – Commercial and Institutional Building Construction (Size Standard: $45M).
• PSC Code: Z1DA – Maintenance of Hospitals and Infirmaries.

Interested parties must submit capability information by April 27, 2026, 2:00 PM PDT to daniel.jhun@va.gov with the subject line "Attention: Project No. 570-23-223, Renovate Building 1, 1st Floor Acute Respiratory Clinic". Requested information includes:

• Business Size and Socio-Economic Status (SDVOSB, WOSB, 8(a), HUBZone, etc.)

• Prime or Subcontractor status

• SAM Unique Entity ID (UEI)

• Bonding Capability (per contract and aggregate)

• Anticipated Teaming Arrangements

• Realistic assessment of the period of performance

• Experience managing construction projects between $2M and $5M with similar scope and complexity (including ARC renovations).

• Must be registered in the System for Award Management (SAM).

• Must have a current Online Representations and Certification Application on file with SAM.

• Service-Disabled Veteran-Owned Small Businesses and Veteran-Owned Small Businesses must have ownership and control verified by the VA and be listed in the SBA Small Business Search.

• This announcement is for market research only and does not constitute a solicitation.

• The government will not pay for information submitted.

• Draft construction drawings, SOW, and specifications are attached for reference.

• Responses should not exceed 10 pages.

Specifications / Master Specifications

This document comprises the "Master Specifications" for the "Design to Renovate Bldg 1, 1st Floor ARC" project at the VA Central California Health Care System in Fresno, CA. It details technical specifications across various construction divisions, including General Requirements (safety, environmental, quality control), Divisions 00-13 (special provisions, concrete, metals, finishes, specialties, special construction, fire suppression), and Divisions 22-28 (plumbing, HVAC, electrical, communications, electronic safety and security). Specific divisions covered include Earthwork (31), Thermal and Moisture Protection (07), Openings (08), Finishes (09), Specialties (10), Furnishings (12), and Special Construction (13).

Key areas for bidders include understanding the Scope of Work by reviewing "SUMMARY" sections in each Division, adhering to numerous referenced industry standards (ASTM, ASME, ANSI, NFPA, etc.), complying with detailed Submittal requirements (Section 01 33 23), meeting Quality Assurance standards (installer qualifications, manufacturer requirements), following specific Installation and Execution instructions, and adhering to extensive Safety and Environmental Requirements (Division 01).

Covers general requirements, conductors, grounding, raceways, switchboards, panelboards, motor control centers, generators, transfer switches, lighting controls, wiring devices, and electrical installations.

Includes common work results, motors, piping, ductwork, air cleaning devices, fans, air terminal units, lighting fixtures, and control systems.

Details requirements for fire alarm control units, notification appliances, initiating devices, and supervisory devices.

Covers cameras, video management systems, network encoders, and recording devices.

Outlines requirements for geofoam materials and accessories.

This comprehensive set of specifications is critical for bidders. It outlines the technical requirements, standards, and procedures for all construction aspects, including electrical, HVAC, fire alarm, video surveillance, and geofoam fill systems. Bidders must thoroughly review all relevant sections to ensure their proposals and execution plans meet all compliance requirements.

Form / Attachment / Pricing Sheet

This document contains the "100% Construction Documents" for the "Design to Renovate Bldg 1, 1st Floor Acute Respiratory Clinic" project at the Department of Veterans Affairs in Fresno, California. It includes a comprehensive set of architectural, structural, mechanical, electrical, plumbing, and fire protection drawings.

• Architectural Drawings: Cover sheet, general information, code compliance plans, infection control plans, demolition plans, reflected ceiling demolition plans, first floor plans, roof plans, exterior elevations, vestibule sections, door and frame schedules, interior finish keys and details, casework details, and signage schedules and plans.
• Structural Drawings: Cover sheets, notes, and plans for the east wing and OPC penthouse.
• Mechanical Drawings: Cover sheet, mechanical demolition plans, HVAC supply and exhaust plans for various floors, penthouse roof exhaust plans, new exhaust plan isometric, pressure relationships, and mechanical schedules and details.
• Plumbing Drawings: Cover sheet, basement and first-floor demolition and piping plans, plumbing schedules, and details.
• Electrical Drawings: Cover sheet, first-floor demolition and power plans, lighting plans, special systems plans, single-line diagrams, and electrical schedules.
• Fire Protection Drawings: Applicable criteria, fire alarm and sprinkler scope of work, and fire alarm symbols.

This document is critical for bidders as it provides the complete technical specifications and design details for the renovation project. It outlines all aspects of the construction, including demolition, new construction, finishes, structural requirements, mechanical systems (HVAC, exhaust), plumbing, electrical, and fire protection systems. Bidders must review these documents thoroughly to understand the full scope of work, prepare accurate bids, and plan for execution. The "DRAFT" watermark indicates these are preliminary documents, and bidders should confirm the final version.