Z2DA--Solicitation No. 36C26126R0019 -- Project No. 662-23-105 Renovate Sterile Processing for VAMC - San Francisco

Amendment / Modification

This amendment to Solicitation No. 36C26126R0019 provides:

• A copy of the sign-in roster for the pre-proposal site visit conducted on March 26, 2026.

• A copy of the safety & Environmental Record and EMR documentation template for use.

• The amendment provides new attachments: the site visit sign-in roster and the safety/EMR template.

• All other terms and conditions of the original solicitation remain unchanged.

• The hour and date specified for receipt of offers is not extended by this amendment.

Other / Unclassified

This document is a sign-in roster for a pre-proposal site visit for the San Francisco VA Medical Center Project #662-23-105, "Renovate Sterile Processing." It records the names, companies, phone numbers, email addresses, and whether the attendee represents a Prime or Subcontractor, along with a "Prime or sub" designation and a "Electrical" or "Flouring" category. The roster also includes the Contracting Officer's name.

This document is relevant to potential bidders as it lists companies and individuals who attended the pre-proposal site visit. This information can be used to identify potential partners, subcontractors, or competitors who have expressed interest in the opportunity and have direct knowledge of the site conditions.

Form / Attachment / Pricing Sheet

This document is a "Contractor Certification Regarding Safety and Environmental" form required for Solicitation No. 36C26126R0019, Project No. 662-23-105 (Renovate Sterile Processing Service at San Francisco VA Medical Center).

• OSHA Violations: Contractors must report the number of serious, willful, or repeat violations from OSHA within the last 3 years. Explanations are required for any violations. A disqualification occurs with four serious, one repeat, or one willful violation.
• EPA Violations: Contractors must report the number of serious, willful, or repeat EPA violations within the last 3 years. Explanations are required for any violations. A disqualification occurs with four serious, one repeat, or one willful violation.
• Insurance Experience Modification Rate (EMR): Contractors must provide their current EMR and support it with a signed letter from their insurance carrier on letterhead.
• Signature Block: Includes fields for Signature, Typed Name, and Title.

This form is critical for bidders to complete and submit as part of their proposal. It requires specific information regarding past safety and environmental compliance, as well as current insurance standing. Failure to meet the criteria outlined (e.g., number of violations, EMR support) could disqualify a contractor from consideration for this opportunity.

Other / Unclassified

This document is a General Decision Number (GDN) for California, specifically detailing prevailing wage rates for various construction trades. It supersedes a previous GDN and lists modifications and publication dates. The document is organized by trade (e.g., Asbestos Workers, Boilermakers, Bricklayers, Carpenters, Electricians, Ironworkers, Laborers, Painters, Plumbers, Roofers, Sheet Metal Workers, Teamsters) and specifies wage and fringe benefit rates for different counties within California. It also includes detailed scope of work for certain classifications and footnotes regarding premium pay, holidays, and specific working conditions.

This document is crucial for bidders on construction projects subject to Davis-Bacon and Related Acts. It establishes the minimum wage rates and fringe benefits that must be paid to laborers and mechanics employed on the construction, alteration, or repair of public buildings or public works. Bidders must use these rates to accurately estimate labor costs and ensure compliance with federal labor standards. The document's detailed breakdown by county and trade allows for precise cost calculations relevant to the specific project location and required trades.

Form / Attachment / Pricing Sheet

This document is an Excel spreadsheet titled "Attachment - Price Proposal Breakdown.xlsx". It serves as a template for bidders to provide a detailed breakdown of their proposed pricing for Solicitation Number 36C261C26R0019, related to Project Number and Title: 662-23-105, RENOVATE STERILE PROCESSING SERVICE FOR SAN FRANCISCO VA Medical Center.

The sheet includes fields for:

• Offeror Name and Preparer Name
• Division Totals (broken down by CSI divisions 01-48)
• Design Total
• Overhead
• Profit
• Insurance & Taxes
• Bonding
• Grand Total
• Labor and Material costs for each division.

Bidders must use this template to submit their detailed price proposal. All fields, including labor and material costs per division, overhead, profit, and other associated costs, need to be accurately completed. The Grand Total will represent the overall proposed price for the project. This breakdown is crucial for the government's evaluation of the offer.

Solicitation / RFP / RFQ

This solicitation is for the renovation of the Sterile Processing Service at the San Francisco VA Medical Center. The project involves extensive renovation to meet current design criteria, including HVAC and water processing. Site preparation and rental of a mobile processing trailer are also required.

• Renovation of the existing Sterile Processing Service.

• Compliance with current design criteria for HVAC and water processing.

• Site preparation for mobile processing trailer.

• Rental of a mobile processing trailer during interior work.

• Adherence to detailed construction documents, specifications, and drawings.

• Compliance with Infection Control Risk Assessment (ICRA) requirements.

• Use of government-provided Construction Management software (Submittal Exchange) or an approved alternative.

• Contract Type: Firm Fixed Price (FFP).

• Estimated Magnitude: Between $10,000,000.00 and $20,000,000.00.

• Period of Performance: 670 calendar days from Notice to Proceed.

• Proposals are due by April 20, 2026, at 2:00 PM PDT.

• Submission is via email to daniel.jhun@va.gov.

• A pre-proposal conference and site visit is scheduled for March 26, 2026.

• Questions (RFIs) are due by April 2, 2026.

• Evaluation will be a best value trade-off selection process, considering Technical Approach, Project Experience, Past Performance, and Price.

• A Bid Bond is required.

• Performance and Payment Bonds will be required upon award.

• This acquisition is a total set-aside for certified/verifiable Service-Disabled Veteran Owned Small Business (SDVOSB) concerns.

• Offerors must be CVE verified and listed in SBA Small Business Search prior to proposal submission.

• Offerors must have an active Unique Entity Identification (UEI) number and be current in SAM.gov.

• Applicable NAICS Code: 236220 (Commercial and Institutional Building Construction) with a Small Business Size Standard of $45 Million.

• Wage Determination General Decision Number: DBA CA20260018 dated 20260130 applies.

Form / Attachment / Pricing Sheet

This document, titled "Project Room Contents Report (PRCR) - Utility Code Legend," serves as a reference guide for understanding the utility requirements associated with various rooms within a project. It details codes for plumbing, electrical, medical gas, miscellaneous gas, non-medical gas, and other miscellaneous items.

• Utility Code Legend: A table that maps specific codes (A through T) to descriptions of utility services such as hot and cold water, various electrical voltages, oxygen, vacuum, steam, natural gas, and specialized gases.
• Notes: A disclaimer stating that the values shown are based on standard typicals and that the contractor is responsible for developing and coordinating the design and construction in accordance with actual equipment selection.

This document is crucial for bidders to understand the specific utility infrastructure requirements for different areas within the project. It helps in assessing the scope of work related to utility connections, power requirements, and gas supply systems, which are essential for accurate bidding and project planning.

Form / Attachment / Pricing Sheet

This document, VAAR 852.219-75 VA NOTICE OF LIMITATIONS ON SUBCONTRACTING—CERTIFICATE OF COMPLIANCE FOR SERVICES AND CONSTRUCTION (JAN 2023) (DEVIATION), requires offerors to certify their compliance with subcontracting limitations. This is a mandatory requirement for the solicitation.

• Services Contracts: Offerors must certify they will not pay more than 50% of the government-paid amount to firms that are not certified SDVOSBs or VOSBs. Work subcontracted by a certified SDVOSB/VOSB subcontractor counts towards this limit.
• General Construction Contracts: Offerors must certify they will not pay more than 85% of the government-paid amount to firms that are not certified SDVOSBs or VOSBs. Work subcontracted by a certified SDVOSB/VOSB subcontractor counts towards this limit. Costs of materials are excluded.
• Special Trade Construction Contractors: Offerors must certify they will not pay more than 75% of the government-paid amount to firms that are not certified SDVOSBs or VOSBs. Work subcontracted by a certified SDVOSB/VOSB subcontractor counts towards this limit. Costs of materials are excluded.
• Acknowledgement of Penalties: Offerors acknowledge that this certification is subject to Title 18, United States Code, Section 1001, and that false certifications may result in criminal, civil, or administrative penalties.
• Cooperation: Offerors agree to cooperate and provide documents to the VA to determine compliance.
• Certification Form: A specific section requires the offeror to complete, sign, and return the certification. Failure to do so will result in the offer being deemed ineligible for award.

This document is critical for bidders. It outlines the specific subcontracting limitations based on contract type (Services, General Construction, Special Trade Construction) and requires a formal certification. Bidders must carefully review these limitations and complete the provided certification form accurately. Failure to submit this completed form will lead to disqualification from the award process.

Form / Attachment / Pricing Sheet

This document is a Request for Information (RFI) form. It is used by potential contractors to submit questions or request information regarding a specific government contract opportunity.

• Contractor Name, Address, Phone, Email
• RFP #
• Contractor RFI #
• Project Name and Number
• Date Requested
• Acquisition No.
• Reference
• Drawing
• Specification Section
• Description of Problem or Information Being Requested (requiring specificity from the contractor)
• VA Project Manager's Response section
• VA Tracking # for all RFIs
• Amendment #
• VA Project Engineer/Manager
• Date

This form is essential for bidders who need to ask clarifying questions about the solicitation (RFP # 36C26126R0019) for the "Renovate Sterile Processing Service for San Francisco VA Medical Center, CA" project. Bidders must use this form to submit their questions to the designated Contracting Officer (daniel.jhun@va.gov) to ensure their inquiries are properly tracked and addressed.

Form / Attachment / Pricing Sheet

This document is the VHA Infection Control Risk Assessment (ICRA) template for Construction, Renovation, and Maintenance activities. It serves as a baseline for performing risk assessments to determine the level of precautions needed to prevent infection risks during such activities. Facilities can customize this template.

• Activity Categorization: Identifies four categories (A, B, C, D) for construction, renovation, and maintenance activities based on scope, duration, and dust/debris creation.
• Affected Area Assessment: Requires identification of the specific activity area and any adjacent areas that will be affected.
• Patient Risk Category: Assesses the risk level (Low, Medium, High, Highest) associated with patients in the affected areas.
• Level of Infection Prevention and Control Precautions: Determines the required precaution level (I, II, III, or IV) by cross-referencing the Activity Category and Overall Patient Risk Category.
• Control Measures: Details specific control measures required for each Level of Precautions, covering work practices, dust control, barrier construction, negative pressurization, and personal protective equipment.
• Completion Measures: Outlines cleaning, HVAC, and water system requirements upon completion of the activity.
• Permit: A fillable permit form is included for Level III and IV activities, which must be posted at the project site.

This document is crucial for understanding the infection control requirements that will be imposed on any construction, renovation, or maintenance work performed under a contract. Bidders need to be aware of these requirements to accurately estimate costs, plan their work, and ensure compliance, especially concerning dust control, barrier construction, and negative air pressure, which can significantly impact project timelines and expenses. The determined Level of Precautions (I-IV) will dictate the specific safety protocols and equipment that must be implemented.

Form / Attachment / Pricing Sheet

This document, "ATTACHMENT A - FACTOR 2 - PROJECT EXPERIENCE," is a mandatory Excel spreadsheet required for bidders to submit information demonstrating their relevant construction project experience. It is specifically used to evaluate Factor 2 of the proposal.

• Solicitation Submission Requirements: Bidders must provide information on relevant and recent construction contracts (within the last five years) of comparable size, complexity, and scope. Up to six projects can be submitted.
• Project Experience Details: For each project, bidders must provide:
  • Title, Contract #, Project Description, Dollar Amount
  • Construction Type (e.g., Design-build, Design Bid Build)
  • Completion Status (Completed, Recent, On Time)
  • Prime Contractor Status, Self-Performance Percentage, Joint Venture Status
  • Location (Within VISN 21 Geographic Location)
• Specific Focus: Bidders are required to submit up to four example projects demonstrating experience in constructing Sterile Processing Service (SPS) projects or similar healthcare-related projects.
• Evaluation Criteria: The government will only evaluate information provided within this Attachment A. Other information will not be considered.

This attachment is critical for bidders to demonstrate their capability and experience in relevant construction projects, particularly in healthcare settings. Failure to comply with the format and content requirements of Attachment A will result in the proposal not being evaluated for this factor. The evaluation focuses on demonstrated experience, depth, recency, timely completion, team arrangement, and geographic location within VISN 21. Specific definitions for relevancy, size ($10M-$20M), complexity (design-build with specialty trades/engineering), scope, and recency (within 5 years) are provided.

Form / Attachment / Pricing Sheet

This document provides detailed specifications and rough-in drawings for the GETINGE Model 8668 Washer Disinfector, Double Door - Steam Heated.

• General Specifications: Includes dimensions, weight, material of construction, chamber volume, and floor loading.
• Electrical Requirements: Specifies 480V, 3-phase electrical service with 250 AMP breakers.
• Plumbing Requirements: Details connections for cold water, hot water, steam, condensate, air, and drain.
• Mechanical Contractor Responsibilities: Outlines requirements for exhaust ducts, branch ducts, and gravity line vents.
• Installation Contractor (Non-Union) Responsibilities: Covers uncrating, equipment installation, disposal of shipping containers, and final installation checkout.
• Notes: Provides important information regarding installation scheduling, working hours, asbestos removal, union labor, site access, equipment shipping, layout drawings, wall thickness, floor protection, and lighting.

This document is crucial for bidders as it outlines all the technical specifications, utility requirements, and installation responsibilities for the GETINGE Model 8668 Washer Disinfector. Bidders must review this document to understand the site preparation, utility connections, and contractor responsibilities to ensure proper installation and compliance with the manufacturer's requirements. It details the necessary electrical, plumbing, and mechanical provisions, as well as specific notes on wall and floor preparation, which are critical for accurate bidding and successful project execution.

Form / Attachment / Pricing Sheet

This document provides detailed specifications and diagrams for various plumbing fixtures and equipment, including sinks, faucets, eyewash stations, and waste receptacles. It serves as a reference for product selection and installation.

• Lavatories: Includes vitreous china slab type lavatories with various faucet hole configurations and sensor-operated faucets, as well as wall-mount bathroom sinks.
• Faucets: Details gooseneck spout faucets with AC power supply and electronic sensor technology, and two-handle centerset lavatory faucets.
• Eyewash Stations: Features wall-mounted, hands-free emergency eyewash stations and all-stainless steel eye/face wash units with thermostatic mixing valves.
• Waste Receptacles: Includes fire-resistant wastebaskets, step-on wastepaper baskets, and BRUTE® containers with lids and dollies.
• Shelving and Carts: Specifications for wire shelving carts, solid shelving units, and surgical case carts.
• Other Equipment: Details on computers, printers, copiers, microwaves, and combination whiteboard/bulletin boards.

This document is crucial for bidders to understand the specific types, dimensions, materials, and installation requirements of the plumbing fixtures and equipment needed for the opportunity. It allows for accurate product selection, pricing, and compliance with technical specifications.

Form / Attachment / Pricing Sheet

This document comprises a comprehensive list of drawings that form part of the contract for the "Renovate Sterile Processing Service" project at the San Francisco VAMC. It also details specifications for "Manufactured Metal Casework" (Section 12 31 00), "Manufactured Wood Casework" (Section 12 32 00), and "Countertops" (Section 12 36 00), outlining material, fabrication, installation, and quality assurance requirements.

Drawings:

• General: Cover Sheet, General Information, ICRA, Life Safety, Phasing.
• Environmental: Building 200 Roof, Floors 1 & 2, Exterior Hazards.
• Civil: Existing Conditions, Site Plan, Utility Plan.
• Structural: Notes, Loads, QA, Framing Plans, Details.
• Architectural: Site Plan, Demolition, RCP, Elevations, Schedules (Door, Finish).
• Fire Protection: Notes, Legend, Audibility, Fire Alarm, Suppression Plans.
• Plumbing: Legend, Demolition, Plans (DWV, Water, Gas), Details, Schedules.
• Mechanical: Legend, HVAC Demolition, Duct, Piping, Controls, Details, Schedules.
• Electrical: Legend, Site Plan, Details, One-Line Diagrams, Panelboard Schedules.
• Telecommunications: Notes, Demolition, Plans, Details, Risers.
• Electronic Safety & Security: Access Control, Intrusion Detection, Video Surveillance, Fire Alarm.
• Exterior Improvements: Cement, Asphalt Paving.
• Utilities: Water, Sanitary Sewer.

Casework & Countertops:

• Metal Casework: Materials (steel, stainless steel, glass), fabrication, finishes, VA standard cabinets.
• Wood Casework: Materials (plywood, MDF), hardware, fabrication, quality assurance.
• Countertops: Materials (resin, stainless steel), fabrication, installation, sinks, faucets.
• Applicable Standards: Numerous ASTM, ASME, NEMA, NFPA, and VA standards.
• Execution: Installation, testing, cleaning, protection.

This document is critical for bidders. The drawings provide a visual roadmap to the project's scope, essential for accurate cost estimation, execution planning, and identifying potential coordination issues. The detailed specifications for casework, countertops, and associated plumbing are vital for understanding material requirements, fabrication methods, quality standards, and installation procedures, ensuring compliance and successful project execution. Bidders must thoroughly review all drawings and specifications to prepare a compliant bid.

Form / Attachment / Pricing Sheet

This document contains the "Final Construction Documents" for the "Renovate Sterile Processing Service" project at the San Francisco VAMC. It includes "100% Construction Documents" and serves as a detailed specification document outlining requirements for various systems.

The document is primarily a table of contents and detailed specifications for the VHA Master Specifications. It covers a wide range of construction divisions and sections, including:

• General Requirements: Project schedules, shop drawings, quality control, waste management, commissioning.
• Existing Conditions: Demolition, asbestos abatement, lead-based paint removal.
• Materials & Assemblies: Concrete, masonry, metals, wood, thermal and moisture protection, openings, finishes, specialties, equipment, furnishings, special construction, fire suppression, plumbing, HVAC, electrical, communications, electronic safety and security, utilities, and exterior improvements.
• Specific Systems: Detailed requirements for Physical Access Control System (PACS), Intrusion Detection System (IDS), Video Surveillance (SSTV System), Fire Detection and Alarm, Water Utilities, Sanitary Sewer Utilities, Cement and Concrete for Exterior Improvements, Asphalt Paving, Chain Link Fences and Gates, and Earthwork.
• Technical Details: Includes system components, installation procedures, testing and commissioning, applicable industry standards (ASTM, NFPA, UL, AWWA, ASME), and coordination requirements.

This document is crucial for bidders to understand the full scope of work and the specific technical requirements for all systems involved in the renovation. Bidders must consult this table of contents and detailed specifications to identify all relevant sections applicable to their scope of work. It dictates the quality of materials, installation methods, and performance standards that must be met, ensuring accurate cost estimation, technical proposal development, and compliance with VHA standards and contract requirements.

Form / Attachment / Pricing Sheet

This document comprises the "FINAL CONSTRUCTION DOCUMENTS" for the "RENOVATE STERILE PROCESSING SERVICE" project (VA Project Number: 662-23-105) at the VA San Francisco Healthcare facility. It contains a comprehensive set of drawings and schedules essential for understanding the project's scope and technical requirements.

• Project Scope: Renovation of the Sterile Processing Service area, including demolition of existing systems and installation of new plumbing, HVAC, electrical, and telecommunications systems.
• Location: VA San Francisco Healthcare, 4150 Clement Street, San Francisco, CA 94121, Building Number 200.
• Project Number: 662-23-105.
• Drawings: Includes detailed plans for:
  • Structural, Architectural, Civil, Fire Protection
  • Plumbing (Drainage, Waste, Vent, Medical Gas, Water Supply)
  • Mechanical (HVAC ductwork and piping, including temporary systems)
  • Electrical (Power, Lighting, Site Plans, Temporary Equipment)
  • Telecommunications (Infrastructure, Site Plans, Temporary Trailers, Security)
• Schedules: Comprehensive lists for plumbing fixtures, valves, duct construction, diffusers, registers, grilles, fans, terminal units, and electrical panels.
• Details: Various construction details for mechanical, electrical, and telecommunications systems, including seismic bracing, mounting, and bonding.
• Environmental Considerations: Includes Infection Control Risk Assessment (ICRA) and Life Safety Plans, as well as details on identified environmental hazards.
• Phasing: Outlines the project's construction phases.
• Consultants: Lists various engineering, architectural, and specialized consultants involved.

This document is critical for bidders as it provides the complete technical specifications, design details, and scope of work for the renovation project. Bidders must thoroughly review these drawings and schedules to understand the full extent of the work, including required materials, installation methods, and compliance standards for all systems. Accurate proposals and compliance with specified standards depend on a detailed review of this document.

Form / Attachment / Pricing Sheet

This document provides detailed specifications and ordering information for various components, including:

• Computer Workstations: OptiPlex 7080 Tower, Small Form Factor, and Micro models with various processor, memory, and storage options. Includes details on custom stands, mounts, and purpose-built solutions like monitors and keyboards.

• Printers: High-resolution computer printers, including office-style laser printers and label printers for pharmacy applications.

• Copiers: Floor-standing digital copiers with automatic paper handling and duplexing capabilities.

• Microwave Ovens: Countertop microwave ovens with various capacities and features.

• Televisions: High-definition LED televisions.

• Workstations: L-shaped and straight free-standing workstations, as well as central sterile workstations with adjustable features.

• Cabinets: Various types of cabinets including U/C/B base cabinets with shelves and drawers, sink cabinets, and wall-mounted storage cabinets.

• Cleaning Equipment: Wet/dry vacuums with HEPA filtration and mop buckets/wringers.

• Storage and Transport: Wire shelving units, carts for scope transport, surgical case carts, and linen hampers.

• Plumbing Fixtures: Eyewash stations, mixing valves, lavatories, and faucets.

• Waste Receptacles: Fire-resistant wastebaskets and trash cans.

• Whiteboards/Bulletin Boards: Combination units.

• Clocks: Battery-operated wall clocks.

• Detailed Specifications: Each item includes nomenclature, JSN (Job Site Number), weights and measures, utility requirements, and detailed descriptions.

• Model Numbers and Ordering Information: Specific model numbers, dimensions, and configurations are provided for each item.

• Features and Benefits: Key features and advantages of each product are highlighted.

• Compliance and Certifications: Relevant standards and certifications (e.g., ADA, NSF, UL, CSA) are listed where applicable.

• Dimensions and Diagrams: Technical drawings and dimensions are included for many items.

This document serves as a comprehensive catalog of various equipment and supplies. Bidders can use this information to identify specific items, understand their technical specifications, and determine compatibility with the opportunity's requirements. It provides detailed information necessary for accurate bidding and procurement.

Form / Attachment / Pricing Sheet

This document provides detailed specifications and rough-in drawings for various Getinge equipment, including sterilizers, washer/disinfectors, loading cars, and detergent management systems. It outlines project responsibilities for installation, electrical, plumbing, and mechanical contractors, as well as notes on site preparation, utilities, and installation procedures.

• Sterilizers (Model 67N17): Details dimensions, performance, heating options (house steam, electric, steam-to-steam), and utility requirements (steam, water, electrical, network).
• Washer/Disinfectors (Models 8668, 9100, CM320): Provides rough-in drawings, utility requirements (plumbing, electrical, steam, air), and notes on installation responsibilities.
• Loading Car & Transfer Carriage (24x36x60 Chamber): Describes the construction and dimensions of the loading car and transfer carriage.
• Detergent Management System (Get-Clean): Includes rough-in drawings for the system, detailing pump configurations, utility requirements, and notes on installation.
• Site Preparation: Outlines requirements for wall preparation, floor, water supply, drain, air supply, electrical supply, ventilation, and network connections.
• Notes: Provides important information regarding installation scheduling, working hours, removal of asbestos, union labor, site access, equipment dimensions, storage, layout drawings, wall thickness, floor protection, lighting, and electrical receptacles.

This document is crucial for bidders as it contains all the technical specifications, dimensions, utility requirements, and installation responsibilities for the Getinge equipment. Bidders will need to use this information to accurately quote and plan for the installation of these complex systems, ensuring compliance with all specified requirements and coordinating with various contractors.

Sources Sought Notice

This is a sources sought announcement for Project No. 662-23-105, "Renovate Sterile Processing for VAMC - San Francisco." The Department of Veterans Affairs (VA) is conducting market research to identify interested and capable vendors for a firm-fixed-price construction contract. No solicitation is currently available.

• Extensive renovation of the Sterile Processing Department (SPD) to comply with current design criteria, including HVAC and water processing.

• Site preparation and rental of a mobile processing trailer during interior work.

• Exterior construction adjacent to Building 2 for trailer preparation.

• Interior construction on the 3rd floor of Building 200, adjacent to the Operating Room Suite.

• Strict noise, vibration, and dust control measures are expected due to proximity to the operational Operating Room Suite, requiring work during specific hours (weekends, holidays, evenings, nights).

• Contract Type: Firm-fixed-price construction.

• Project Magnitude: Estimated between $10,000,000.00 and $20,000,000.00.

• Period of Performance: Approximately 670 calendar days after Notice to Proceed (NTP).

• This is a sources sought notice; no proposals are being accepted.

• Interested parties are requested to submit capability information via email to daniel.jhun@va.gov by 2:00 PM PDT on January 20, 2025.

• Submissions should be no more than 10 single-sided pages.

• NAICS Code: 236220 – Commercial and Institutional Building Construction (Size Standard: $45M).

• PSC Code: Z1DZ – Maintenance of Other Hospital Buildings.

• Potential Offerors must be registered in SAM.gov.

• Service-Disabled Veteran-Owned Small Businesses (SDVOSB) and Veteran-Owned Small Businesses (VOSB) must have ownership and control verified by the VA and be listed in the SBA Small Business Search.

• Business Size (Large/Small)

• Business Socio-Economic Status

• Prime or Subcontractor identification

• SAM Unique Entity ID (UEI)

• Bonding Capability (per contract and aggregate)

• Anticipated Teaming Arrangements

• Assessment of the period of performance realism

• Experience in managing similar construction projects ($10M-$20M magnitude)

• Past and present corporate experience on similar public works/medical facility projects

• Approach to meeting Limitations on Subcontracting

• Draft construction drawings are attached for reference.

• The VA will not pay for any information submitted.

• This notice does not commit the Government to a solicitation or award.

Forms / Attachments / Pricing Sheets

This document, titled "Project Room Contents Report (PRCR) Utility Code Legend," serves as a reference guide for understanding the utility codes associated with various project rooms. It details the plumbing, electrical, medical gas, miscellaneous gas, non-medical gas, and miscellaneous components for each code.

• Utility Code Legend: A table mapping codes (A-T) to specific utility configurations.
• Room Contents: Lists of items (JSN Nomenclature) with quantities, acquisition/installation status, comments, and dimensions for specific rooms within the "STERILE PROCESSING SERVICE (285)" project.
• Room Information: Includes Department Name, Functional Area, Room Name, Room Code, Room Area (sf), and Room Number for each listed room.
• Notes: A disclaimer stating that values are based on standard typicals and the contractor is responsible for coordinating design/construction with actual equipment selection.

This document is crucial for bidders to understand the specific utility requirements and existing or planned equipment within various rooms of the "VA San Francisco SPS Renovation" project. It provides detailed information on the types and quantities of fixtures, equipment, and their dimensions, which is essential for accurate bidding, proposal development, and project planning. Bidders can use this to assess the scope of work related to utility connections, equipment installation, and overall project feasibility.

Other / Unclassified

This document comprises the "Final Construction Documents" for the "Renovate Sterile Processing Service" project at the VA San Francisco Healthcare facility. It is a compilation of architectural and engineering drawings, including cover sheets, general information, ICRA details, life safety plans, phasing plans, environmental hazard plans, civil, structural, mechanical, electrical, plumbing, fire protection, architectural, and telecommunications drawings. The documents are marked as "DRAFT" and "PRELIMINARY, INCOMPLETE, NOT FOR CONSTRUCTION, RECORDING OR IMPLEMENTATION."

• General & Project Information: Cover Sheet (G1000), General Information (G1001), ICRA Construction Details (G1002), Life Safety Plans (G1011), Phasing Plans (G1012).
• Site & Structural: Environmental Hazard Plans (HA101-HA103), Civil Drawings (CE100, CS100, CU100), Structural Drawings (S-001, S-002, S-101, S-102, S-201, S-501-S-503, S-541).
• Mechanical & Plumbing: HVAC Drawings (M-001, MDH103-MDH104, MDP103, MH103-MH104, MP103-MP104, M-201, M-401, M-501-M-504, M-601, M-701-M-703), Plumbing Drawings (P-000, PD100-PD104, PL100-PL104, PP100-PP102, P-300-P-302, P-500, P-600).
• Electrical & Fire Protection: Electrical Drawings (E-001, ED101-ED104, ES101, ES401, EL101, EP101-EP103, E-501, E-601-E-602, E-701-E-702), Fire Protection Drawings (FA001, FA101-FA102, FX001, FX101).
• Architectural & Telecommunications: Architectural Drawings (AE001, AE100-AE102, AE121, AE400-AE406, AE407, AF701, AF711, AG001-AG002, AF901), Telecommunications Drawings (TN001, TND101, TN101-TN102, TN501-TN502, TN601, TY601).
• Schedules: Plumbing fixture, valve, pipe, equipment, and panelboard schedules are included (e.g., P-600, M-701, E-701, E-702).

This comprehensive set of "DRAFT" construction drawings is essential for bidders to understand the full scope, technical requirements, and site conditions for the "Renovate Sterile Processing Service" project. Bidders must review these detailed plans for all disciplines (structural, mechanical, electrical, plumbing, fire protection, architectural, telecommunications) to accurately estimate costs, identify material requirements, understand installation methods, and develop a compliant proposal. The preliminary nature of these documents indicates they are for planning and estimation purposes and may be subject to change.