DDAA WEAPON SPECIAL PACKAGING INSTRUCTIONS (SPI) BOXES

Amendment / Modification

• This amendment to solicitation SP3300-26-Q-0056 is not extending the offer receipt date.

• It indicates that historical orders are attached.

• Item 11: "THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS"

• Item 14: "DESCRIPTION OF AMENDMENT/MODIFICATION"

• The deadline for offer receipt remains unchanged.

• Bidders should review the attached historical orders for relevant information.

Solicitation / RFP / RFQ

This is a combined synopsis/solicitation for commercial products, specifically M2A1, M4, M240, and M240B Special Packaging Instructions (SPI) boxes, in support of DLA Distribution Anniston, AL (DDAA). It constitutes the only solicitation, and quotes are being requested; a written solicitation will not be issued. This is being issued as a Request for Quote (RFQ) under solicitation SP3300-26-Q-0056.

• Procurement of M2A1, M4, M240, and M240B Special Packaging Instructions (SPI) boxes.

• Packaging materials must meet Military Preservation Method MIL-STD-2073 requirements per SPI.

• All material shall be packaged using best commercial practice in accordance with ASTM 3951 and marked in accordance with MIL-STD-129P.

• Contract Type: Firm-Fixed-Priced (FFP), Indefinite-Delivery-Indefinite-Quantity (IDIQ).

• Ordering Period: Five-year ordering period.

• Maximum Value: $600,000.00.

• Minimum Order: Not less than $2,500.00.

• Maximum Order: Not to exceed 1,000 KITS for a single item, or 4,000 KITS for a combination of items in a single day.

• Delivery: 45 days After Receipt of Order (ARO).

• Closing Response Date: April 2, 2026, 1:00 PM EST.

• Submission Method: Electronic via email to brian.keckler@dla.mil, Subject: SP3300-26-Q-0056 Quotation – “Company Name”.

• Quote Validity: Prices must be held firm for 60 calendar days from the specified receipt date.

• Evaluation: Quotes will be evaluated on an Acceptable/Unacceptable basis for Technical Capability and Past Performance. Award will be made to the lowest priced quote that meets or exceeds the acceptability standards for the non-cost factors.

• Technical Capability: Must demonstrate understanding of requirements and provide manufacturer name, address, and part numbers.

• Past Performance: Will be evaluated on an acceptable/unacceptable basis. Relevant past performance information should be provided.

• This solicitation is being solicited as a 100% Small Business Set-aside.

• Product Service Code (PSC): 8115 (BOXES, CARTONS, AND CRATES).

• North American Industry Classification System (NAICS) code: 322211 (Corrugated and Solid Fiber Box Manufacturing) with a size standard of 1,250 employees.

• Questions must be submitted via email to Brian Keckler at least four calendar days before the closing date.

• Answers to questions will be posted as an amendment to the solicitation.

• Ship To Address: DLA Distribution Anniston, AL (DDAA), 7 Frankford Avenue, Bldg 362, Door 3, Anniston, AL 36201-4199.

• This acquisition is not a Defense Priorities and Allocations System (DPAS) rated procurement.

Form / Attachment / Pricing Sheet

This document is an Excel spreadsheet titled "Attachment 1 - Schedule of Supplies.xlsx" which details the required container kits for various firearms over a five-year period. It serves as a schedule of supplies, outlining the specific items, quantities, and material specifications needed.

• Product Item Description (PID): Lists specific container kits for M2A1, M4 Carbine, M240 W/E, and M240B firearms.
• Material Group (FSC or PSC): Primarily FSC 8115.
• Material # (NIIN): Unique National Item Identification Numbers for each kit.
• Nomenclature: Detailed descriptions of the container kits, including specific SPI (Special Packaging Instructions) numbers and requirements for fiberboard cushioning (foam is not accepted). It also references a URL for the most recent revision of SPI specifications: https://www.ilsc.army.mil/Packaging.
• Annual Estimate: The estimated quantity of each kit required per year.
• Unit of Issue: 'KT' for Kit.
• Years 1-5: The schedule provides estimated quantities for each kit for five separate years, indicating a recurring need.

This document is crucial for bidders as it specifies the exact items, quantities, and critical material requirements (e.g., fiberboard cushioning) for the container kits. Bidders must review these specifications carefully to ensure their proposed products meet all technical requirements and to accurately price their bids for each year of the potential contract period.

Form / Attachment / Pricing Sheet

This document, a Special Packaging Instruction (SPI), details the specific requirements for packaging, preservation, and packing of the M2A1 Machine Gun, Caliber .50, Quick Change Barrel with Basic Issue Items (BII). It serves as a guide for ensuring the item is protected during transit and storage.

• Item Identification: Machine Gun, Cal.50, M2A1 Quick Change Barrel W/BII, National Stock Number (NSN) 1005-01-511-1250.
• Preservation: Specifies MIL-STD-2073-1, Method 41 for military preservation, including cleaning and drying procedures.
• Packing Materials: Details specific materials required, such as waterproof treated tubes, barrier bags (MIL-DTL-22020E, MIL-PRF-131K), foam supports, fiberboard boxes (ASTM D5118/D5118M), and tape (ASTM D5486).
• Basic Issue Items (BII): Lists components to be included, such as extractor, operator's manual, carrier assembly, and barrel assembly.
• Detailed Operations: Provides step-by-step instructions with visual aids (photos and diagrams) for assembling the packaging, from bagging individual components to sealing the final exterior container.
• Marking: Outlines specific marking requirements for inner and outer containers, including "REUSABLE PACKAGING - DO NOT DESTROY" and "TO OPEN - CUT TAPE ONLY ALONG TOP TAPE SEAMS."
• Palletization: Specifies requirements for palletizing 15 containers per pallet, including heat treatment for wood pallets in accordance with ISPM 15 standards.

This document is critical for any bidder involved in the manufacturing, refurbishment, or shipping of the M2A1 Machine Gun. It dictates the exact packaging, preservation, and marking standards that must be met for successful delivery and acceptance. Understanding these requirements is essential for accurate cost estimation and ensuring compliance with government specifications.

Form / Attachment / Pricing Sheet

This document, DD Form 2169, "SPECIAL PACKAGING INSTRUCTION," provides detailed instructions for the packaging of the 5.56MM M4 Carbine (NSN 1005-01-231-0973). It specifies the methods and materials required to ensure the item is properly preserved, protected, and prepared for shipment.

• Item: 5.56MM M4 Carbine (Part/Drawing No. 9390000, NSN 1005-01-231-0973)
• Preservation: MIL-STD-2073-1, Method 10, using MIL-PRF-3150 preservative.
• Cleaning & Drying: As per MIL-STD-2073-1, with specific instructions for disassembly and cleaning of residue, followed by drying methods.
• Packing: Details Level A (50 unit containers in a shipping container) and Level B (ASTM D5168 Style E, weather-resistant container) packing requirements.
• Blocking: Specific instructions and diagrams for barrel blocking (Figure 1) and butt stock blocking (Figure 2) using fiberboard.
• Materials: Specifies materials for blocking (fiberboard ASTM D4727/D4727M or A-A-59136) and containers (ASTM D6251/ASTM D6251M for Level A, ASTM D5168 for Level B).
• Marking: Requirements per MIL-STD-129, including serial number markings.
• Wood Packaging: Mandates heat treatment for all non-manufactured wood used in packaging.

Vendors involved in the procurement or shipment of M4 Carbines under this specification must adhere strictly to these packaging instructions. Failure to comply could result in rejection of goods or non-payment. This document is critical for understanding the required quality and methods for preparing the item for delivery.

Form / Attachment / Pricing Sheet

This document, DD Form 2169, "SPECIAL PACKAGING INSTRUCTION," provides detailed instructions for the packaging and preservation of the M240 Machine Gun, 7.62MM W/E (National Stock Number 1005-01-025-8095).

• Preservation: Specifies cleaning, drying, and preservative application methods, including requirements for "burned powder residue" and the use of MIL-PRF-372 and MIL-PRF-680.
• Unit Pack: Details the components to be included in the unit pack (e.g., buffer assembly, operating rod assembly, barrel assembly, VCI bags, small arms cleaning case, protective mitten, spare barrel carrying case) and the specific packing materials and methods (e.g., fiberboard boxes, ASTM standards).
• Packing: Outlines requirements for packing multiple unit packs into larger containers, including Level A and Level B packing standards and palletization.
• Marking: Specifies requirements for marking each package, including nomenclature, part numbers, serial numbers, and unique item identification via bar codes.
• Drawings: Includes detailed drawings for components such as the receiver support and lower end support, as well as a packaging diagram.

This document is critical for any bidder involved in the manufacturing, assembly, or delivery of the M240 Machine Gun. It dictates the precise methods and materials required for preservation, unit packaging, and final shipment. Compliance with these instructions is essential for successful contract performance and acceptance of goods.

Form / Attachment / Pricing Sheet

This document is a Special Packaging Instruction (SPI) detailing the specific requirements for packaging the M240 Machine Gun, 7.62mm (Part or Drawing No. 12976814, National Stock No. 1005-01-412-3129).

• Preservation: Specifies MIL-STD-2073-1, Method 33 for military preservation, including cleaning, drying, and application of preservative oil (MIL-PRF-3150).
• Unit Pack: Details the components to be included in the unit pack, such as the operating rod assembly, spring rod, ruptured cartridge extractor, manual, sling, and VCI wrap. It also specifies the use of fiberboard boxes and VCI paper.
• Packing: Outlines requirements for packing twenty containers onto a pallet, adhering to specific ASTM standards for weather resistance and palletization.
• Marking: Instructions for labeling unit packs and shipping containers, including nomenclature, part numbers, and serial numbers via bar codes.
• Wood Packaging: Mandates compliance with ISPM 15 for all wood packaging materials, requiring heat treatment and certification.
• Drawings: Includes detailed drawings for components such as the receiver holder, barrel and bipod support, and support buttstock, providing dimensions for fabrication and assembly.

This document is critical for any bidder involved in the manufacturing, refurbishment, or logistics of the M240 Machine Gun. It provides precise instructions on how the item must be preserved, packaged, and marked to meet military specifications. Failure to comply with these instructions could lead to rejection of the item or other penalties. Bidders must ensure their production and packaging processes align with these detailed requirements.