J035--Proj #TBD | Elevator Modernization | Elias/Prather

Statement of Work (SOW) / Performance Work Statement (PWS)

To perform complete turnkey elevator modernization work at Department of Veterans Affairs (VA) medical centers and facilities nationwide. This includes hydraulic elevators, traction elevators, and related systems, ensuring fully functional, code-compliant, and non-proprietary elevator systems.

• General: Furnish all labor, materials, equipment, tools, transportation, supervision, and services.

• Modernization: Includes new geared/gearless machines, deflector sheaves, hoist ropes, rope compensation, governors, safeties, and overspeed protections for traction elevators. For hydraulic elevators, includes new pumps, motors, valves, and systems. New PVC lining and cylinder/plunger assemblies for single-walled casings.

• Components: Provide new stopping devices, workman's lights, outlets, cartop operating devices, leveling devices, landing units, emergency stop switches, main/auxiliary operating panels, hall fixtures, car position indicators, audio voice systems, auto-dialers, 2-way communications, car guides, corridor operating devices, and hoistway access switches.

• Reuse/Refurbish: Counterweights, buffers, guide rails, brackets, car frames, and car platforms are to be cleaned, inspected, and reused where applicable. Hoistway entrance frames are to be refinished. Stainless steel hoistway doors on Passenger Elevators are to be retained and refurbished unless determined otherwise. Non-stainless doors and all Service Elevator hoistway doors are to be replaced.

• Coordination: Integration with Fire Alarm, Electrical, Mechanical, Plumbing, and Low Voltage/Technology Systems is required.

• Rigging & Disposal: Contractor is responsible for rigging, demolition, and disposal of existing components.

• VA Master Specifications for elevators and related trades (Divisions 01, 07, 09, 14).

• Latest editions of ASME A17.1, A17.2, A17.3, A17.4, A17.5, A17.6, A18.1 (2022 latest version), NFPA 13, 70, 72, 101, 252, International Building Code (IBC), ANSI/ASME QEI-1, ASSE A10.4, VA Master Construction Specifications PG 18-1 Division 14, VA Barrier Free Design Standard PG-18-13, VA Seismic Design Handbook H-18-8, and NEII-1.

• NFPA 101 and its referenced documents take precedence over IBC where conflicts exist, with the more stringent requirement governing.

• Elevator modernization must be code-compliant.

• Non-proprietary control systems are required, allowing full access to diagnostic and operational features for third-party maintenance.

• QEI inspections will be arranged by VA; contractor cooperation is required.

• Nationwide at Department of Veterans Affairs (VA) medical centers and facilities.

• Lead-Based Paint: Perform lead-based paint test prior to welding or cleaning guide rails/buffers in older buildings. Use appropriate cleaning procedures.

• Design Responsibility: Engage a Professional Engineer (PE) for modifications to structural, plumbing, electrical, or fire protection systems. Limited-scope, engineer-sealed drawings are required where necessary.

• Contractor Qualifications: Must meet or exceed qualifications described in Division 14 specifications.

• Deliverables: O&M manuals (electronic), programming/diagnostic tools, keys, codes, training for VA staff, one-year warranty documentation, and all submittals/certifications.

• Attachments: Combined Specifications, H18-8, Master Spreadsheet, VHA Elevator Finish Standard.

Form / Attachment / Pricing Sheet

This document provides detailed architectural drawings for elevator installations, specifically focusing on floor plans, elevations, and ceiling plans for both passenger and service elevators. It serves as a technical specification for the physical layout and components of the elevators.

• Elevator Floor Plans: Depicts the layout of passenger and service elevators, including dimensions, door locations, and call button placements.
• Elevator Elevations: Shows side views of the elevator cars, indicating control panel locations, dimensions, and wall finishes (e.g., SS-1, HPL-1).
• Ceiling Plans: Illustrates the configuration of the elevator car ceiling.
• Dimensions and Clearances: Provides critical measurements for car size, door openings, and clearances required for installation and operation.
• Component Labels: Identifies various components such as "CAR CONTROL PANEL," "EMERGENCY BUTTONS," and "FLOOR CALL BUTTONS."
• Standards Reference: Mentions "SS-1" and "HPL-1" which likely refer to specific material or finish standards.

This document is crucial for bidders to understand the physical requirements and specifications for elevator installations. It directly impacts the design, material selection, and installation planning for any opportunity involving elevator work. Bidders must use these drawings to ensure their proposals accurately reflect the required dimensions, finishes, and configurations.

Form / Attachment / Pricing Sheet

This document, VA Handbook H-18-8, outlines the Seismic Design Requirements for Department of Veterans Affairs (VA) facilities. It establishes standards for seismic resistance in new and existing VA buildings to ensure they remain operational and safe during and after earthquakes.

• Scope: Covers all VA facilities, including those managed by the National Cemetery Administration, Veterans Benefits Administration, and Veterans Health Administration.
• Definitions: Defines key terms such as Facility Criticality Designation (FCD), Seismic Design Category (SDC), and various building types (Critical, Essential, Ancillary).
• New Facilities: Details design and construction requirements for new Critical, Essential, and Ancillary facilities, referencing IBC (International Building Code) and ASCE 7 standards.
• Existing Facilities: Outlines evaluation and retrofit procedures for existing facilities, referencing RP 10-22 standards and ASCE 41.
• Performance Objectives: Specifies performance objectives for evaluation and retrofit, including "Basic Performance Objectives Equivalent to New Building Standards" (BPON) and "Basic Performance Objectives Equivalent to Existing Building Standards" (BPOE).
• Modifications to ASCE 7: Details specific modifications to ASCE 7 requirements for new Critical and Essential Facilities in high seismic design categories, including limitations on structural irregularities, permitted seismic-force-resisting systems, special provisions, and limitations on reinforced concrete and steel structures.
• Nonstructural Components: Addresses requirements for nonstructural components and equipment, including those requiring Special Seismic Certification.
• Site Data: Mandates geologic hazards and site-specific ground-response reports for proposed construction and seismic retrofit of Critical and Essential Facilities in moderate to high seismic design categories.
• Risk Categories: Provides tables (Tables 4-8) categorizing various VA facilities (e.g., Hospitals, Clinics, Administrative Offices) into Critical, Essential, or Ancillary designations, which inform seismic design requirements.

This document is crucial for any bidder involved in the design, construction, or renovation of VA facilities. It specifies the seismic design standards, codes, and performance criteria that must be met. Understanding these requirements is essential for developing accurate proposals, designing compliant structures, and ensuring the safety and operational continuity of VA healthcare and administrative facilities in seismic zones.

Form / Attachment / Pricing Sheet

This document is a Past Performance Questionnaire (PPQ) intended to gather feedback on an offeror's past performance. It is to be completed by a client or evaluator and submitted as part of the offeror's proposal. The PPQ helps the government assess the company's ability to perform the work described in the solicitation.

• Contractor Information: Details about the offeror being evaluated, including name, address, point of contact, and information about the specific contract being referenced (title, number, type, location, dates, price).
• Project Description: A section for the contractor to describe the scope of the project performed.
• Relevance to Project of Submission: A field for the contractor to explain how the past project is relevant to the current opportunity.
• Evaluator Information: Details about the person completing the questionnaire, including name, position, address, and role in the project.
• Performance Ratings: Evaluators rate the contractor's performance in areas such as Quality, Schedule/Timeliness, Communication, Management/Personnel/Labor, Cost/Financial Management, and Subcontract Management using adjectival ratings (Outstanding, Above Average, Satisfactory, Unsatisfactory, Not Applicable).
• Summary: A section for the evaluator to provide an overall rating and indicate if they would hire the firm again.
• Additional Comments: Open space for further remarks.
• Adjectival Ratings Definitions: A page defining the criteria for each rating level.

Offerors must ensure this questionnaire is completed accurately and submitted by the deadline specified in the solicitation. The completed PPQ contributes to the proposal's page count and is crucial for the government's evaluation of past performance. The questions guide the evaluator to provide specific feedback on the contractor's ability to meet contractual requirements, manage projects, and communicate effectively.

Form / Attachment / Pricing Sheet

This document is the VA Notice of Limitations on Subcontracting—Certificate of Compliance for Services and Construction (JAN 2023)(DEVIATION). It requires offerors to certify their compliance with subcontracting limitations.

• Services: For service contracts (except construction), the contractor must not pay more than 50% of the contract amount to firms that are not certified Service-Disabled Veteran-Owned Small Businesses (SDVOSBs) or Veteran-Owned Small Businesses (VOSBs).
• General Construction: For general construction contracts, the contractor must not pay more than 85% of the contract amount to firms that are not certified SDVOSBs or VOSBs.
• Special Trade Construction: For special trade construction contracts, the contractor must not pay more than 75% of the contract amount to firms that are not certified SDVOSBs or VOSBs.
• Certification: Offerors must complete, sign, and return this certification with their bid, quotation, or proposal. Failure to provide this certification will result in the offer being deemed ineligible for evaluation and award.
• Cooperation: Offerors agree to cooperate with the VA and provide necessary documents to demonstrate compliance with subcontracting limitations.

This document is critical for bidders to understand and acknowledge the subcontracting limitations applicable to the opportunity. Bidders must accurately complete and submit this certification as part of their proposal to be considered for award. Failure to comply with these limitations can lead to penalties.

Solicitation / RFP / RFQ

This solicitation is an Invitation for Bids (IFB) for elevator modernization services at various Department of Veterans Affairs (VA) facilities. The acquisition uses a two-step sealed bidding process, requiring technical proposals in Step One and pricing in Step Two. Multiple awards are anticipated.

The core requirement is the complete modernization of elevators at numerous VA facilities. This includes furnishing all labor, materials, equipment, tools, supervision, and services necessary for the modernization. Deliverables include providing all documentation, manuals, diagnostic tools, programming codes, and training for VA operations staff. Modernization work encompasses hydraulic and traction elevators, related systems, and ensuring systems are fully functional, code-compliant, and non-proprietary.

• The contract type is Firm-Fixed-Price.

• The period of performance begins upon award for all CLINs.

• There are 101 Contract Line Items (CLINs), each representing a distinct project site.

• Step One: Submission of technical proposals is required by May 20, 2026, 14:00 EDT, via email. Technical proposals will be evaluated for Acceptability based on Qualifications, Project Experience, and Past Performance. Pricing is not evaluated in Step One.

• Step Two: Only offerors with acceptable technical proposals will proceed to Step Two for bid submission. Awards will be made to the lowest responsive bidder based on price for each CLIN.

• Bids must be firm fixed price and submitted in whole dollar values.

• Site visits will be scheduled for each Item Number/CLIN.

• Technical questions have a cut-off date of May 13, 2026, 14:00 EDT.

• CLINs 0001-0013: Set-aside for Service-Disabled Veteran-Owned Small Business (SDVOSB) concerns only. Bids from non-SDVOSBs will not be considered. Offerors must be certified by the SBA and listed in the SBA database.

• CLINs 0014-0101: Unrestricted, full and open competition. Large businesses must submit a Small Business Subcontracting Plan within 7 calendar days of award.

• Offerors may bid on one, some, or all CLINs for which they are eligible.

• Bidders must submit a lump sum price for each CLIN bid on.

• Payment and Performance Bonds will be required upon award.

• Contractors must be registered in the System for Award Management (SAM).

Form / Attachment / Pricing Sheet

This document is a Table of Contents for the VHA Master Specifications, specifically Section 00 01 10. It outlines the various divisions and sections of the specifications, along with their corresponding dates.

• Division 00: Special Sections
  • Table of Contents (00 01 10)
• Division 01: General Requirements
  • General Requirements (01 00 00)
  • Project Schedules (01 32 16.15)
  • Shop Drawings, Product Data, and Samples (01 33 23)
  • Safety Requirements (01 35 26)
  • Temporary Interior Signage (01 58 16)
• Division 06: Wood, Plastics, and Composites
  • Finish Carpentry (06 20 00)
• Division 07: Thermal and Moisture Protection
  • Firestopping (07 84 00)
• Division 09: Finishes
  • Schedule for Finishes (09 06 00)
  • Stainless Steel Diamond Plate Flooring (09 65 00)
  • Resilient Tile Flooring - SVT (09 65 19)
  • Resilient Tile Flooring - LVT (09 65 19)
• Division 13: Special Construction
  • Seismic Restraint Requirements for Non-Structural Components (13 05 41)
• Division 14: Conveying Equipment
  • Traction Elevator Modernization (14 21 10)
  • Hydraulic Elevator Modernization (14 24 10)

This document serves as a high-level index for the technical specifications related to the opportunity. Bidders can use this to quickly identify which sections of the master specifications are relevant to the project, such as elevator modernization, finishes, firestopping, and seismic requirements. It helps in understanding the scope and organization of the technical documentation.

Form / Attachment / Pricing Sheet

This document outlines the milestone-based commercial interim payment schedule for the elevator modernization contract. It details how payments are computed, earned, liquidated, secured, and requested, referencing FAR Subpart 32.2 and related clauses.

• Payment Computation: Fixed percentage financing payments tied to specific performance events (milestones).
• Milestones & Percentages:
  • Milestone 1: Payment for Bonds (1%)
  • Milestone 2: Submittals, Design, Shop Drawings (5%)
  • Milestone 3: Elevator Equipment Ordered (12%)
  • Milestone 4A: Mobilization/Demolition of Existing Elevator (32% total, divided per elevator)
  • Milestone 4B: Installation Complete/Final Acceptance (50% total, divided per elevator)
• Entitlement Conditions: Requires satisfaction of FAR 52.232-29 conditions, milestone trigger occurrence, and no Government security impairment.
• Liquidation: Milestone payments are interim and must be liquidated from subsequent delivery/invoice payments.
• Security: Payments are secured by the performance bond.
• Request Process: Monthly requests, in a form prescribed by the contracting officer, including specific milestone details and supporting documentation.

This document is crucial for understanding the payment structure and cash flow associated with the contract. Bidders must review the milestones, their associated payment percentages, and the required documentation for each to accurately forecast costs and manage project finances. The phased payment structure, tied to specific deliverables and acceptances, directly impacts project planning and financial management.

Form / Attachment / Pricing Sheet

This Excel workbook provides contractors with detailed information to develop accurate bids for elevator modernization efforts. It is organized into three sheets: 'Instructions', 'CLIN Info', and 'Master Elevator List'.

• Instructions Sheet: Outlines how to use the workbook, emphasizing reviewing CLIN information first, then detailed elevator specifications.
• CLIN Info Sheet: Lists Contract Line Item Numbers (CLINs), associated VISNs, locations (city), periods of performance (days), and the number of elevators per CLIN. This sheet details the scope of work by CLIN.
• Master Elevator List Sheet: Provides site-specific, detailed information for each elevator, including elevator type (hydraulic/traction), floors served, platform size, roping configuration, rated load, contract speed, travel distance, entrance type/size, building criticality, seismic design category, hazardous material impact, phasing restrictions, laydown space requirements, parking availability, and whether machine room/electrical drawings are available.

This document is crucial for bidders to understand the specific requirements and scope for each CLIN. It allows for detailed pricing by providing elevator specifications, location, and performance periods. Bidders must cross-reference CLIN information with the Master Elevator List to accurately price their proposals and identify any site-specific constraints or requirements.