Construction of UEPH Barracks at Fort Campbell KY

Amendment / Modification

This amendment (0003) modifies the solicitation W912QR26RA016 for UEPH Barracks FY26 at Ft. Campbell, KY. Key changes include:

• Revised and Replaced Specifications:
  • Section 27 10 00 - BUILDING TELECOMMUNICATIONS CABLING SYSTEM
  • Section 00 10 00 - Price Breakout Schedule_Amendment 0003
• Added Plan Sheets:
  • M-718 THERMOSTAT SCHEDULE
  • M-719 THERMOSTAT SCHEDULE
• Extended Proposal Due Date: The proposal due date has been extended from May 26, 2026, to May 28, 2026.

Specifications sections 27 10 00 and 00 10 00 have been revised and replaced. Several plan sheets have been added.

The proposal due date has been extended to May 28, 2026.

Amendment / Modification

This document, Amendment 0003, revises the original solicitation documents. The specific changes are not detailed within this sheet index, but it indicates that Amendment 0003 was issued in May 2026.

This amendment likely affects various sections of the original solicitation, including plans and specifications, as indicated by the "W912QR26RA016_Plans-0003" file name.

Potential bidders should review Amendment 0003 to understand any changes to requirements, deadlines, or evaluation criteria that may impact their proposal submissions.

Amendment / Modification

This amendment (0002) revises and replaces the following specification sections in their entirety:

• 01 32 01.00 06 - PROJECT SCHEDULE
• 01 50 00 - TEMPORARY CONSTRUCTION FACILITIES AND CONTROLS
• 05 50 13 - MISCELLANEOUS METAL FABRICATIONS
• 08 11 13 - STEEL DOORS AND FRAMES
• 08 14 00 - WOOD DOORS
• 08 41 13 - ALUMINUM-FRAMED ENTRANCES AND STOREFRONTS
• 14 21 23 - ELECTRIC TRACTION PASSENGER ELEVATORS
• 21 13 13 - WET PIPE SPRINKLER SYSTEMS, FIRE PROTECTION
• 21 30 00 - FIRE PUMPS
• 22 00 00 - PLUMBING, GENERAL PURPOSE
• 23 03 00 - BASIC MECHANICAL MATERIALS AND METHODS
• 23 09 13 - INSTRUMENTATION AND CONTROL DEVICES FOR HVAC
• 23 64 10 - WATER CHILLERS, VAPOR COMPRESSION TYPE

No new specification sections were added, and no specification sections were deleted in this amendment.

• Specifications: Numerous specification sections listed above have been revised and replaced.

• Plan Sheets: The following plan sheets have been revised and replaced:

  • G-1002, G-1003 (Sheet Index)
  • CU101, CU102, CU105 (Utility Plan)
  • A-501 (Wall Section Details)
  • A-512, A-513 (Roof Isometric Details)
  • A-601 (Partition Types, Schedule, and Details)
  • A-611 (Doors and Frames Schedule and Details)
  • A-662 (Door Details - Hollow Metal)
  • A-671 (Window and Frames and Schedules and Types and Details)
  • A-682 (Aluminum Curtain Glass Wall Details)
  • E-121, E-122, E-123, E-124, E-127, E-131, E-135, E-139 (1st, 2nd, 3rd, 4th, 5th Floor Power Plan)
  • E-402, E-403, E-411, E-604, E-605, E-608, E-612, E-613, E-614, E-615, E-616, E-617, E-618, E-619 (Electrical Room Enlarged, Stacked Electrical Room Views, Electrical Single Line Drawing, Conduit Schedule, Panel Schedules)
  • FA-106 (FAMNS Plan)
  • FA-501 (Sequence of Events Matrix)
  • T-001 (General Notes)
  • T-503 (Telecom Outlet Details)
  • T-504 (Door Alarm and Riser and Details)
  • M-111, M-112, M-116, M-122, M-132, M-142, M-152, M-401, M-501, M-602, M-605, M-701, M-702, M-703, M-716 (HVAC Ductwork and Piping Plans, Mechanical Room, Mechanical Details, Equipment Schedules, Control System Network)

• New Plan Sheets:

  • A-672 (Window and Frames and Schedules and Types and Details)
  • M-717 (Energy Controls Monitoring)

• Added Reference Documents:

  • 00_Schedule Guide Master Template w-Specs

• Added Clauses:

  • 00 70 00 – FAR 52.222-90 Addressing DEI Discrimination by Federal Contractors. (Deviation 2026-00038)

• The proposal due date has been extended from 12-MAY-2026 to 26-MAY-2026.

• The Response Due Time has been extended from 10:00 AM to 02:00 PM.

• The Party to receive Solicitation has changed from W912QR, W072 ENDIST LOUISVILLE, KO CONTRACTING DIVISION, 600 DR MARTIN LUTHER KING JR PL, LOUISVILLE, KY 40202-2230, UNITED STATES to W912QR, W072 ENDIST LOUISVILLE, KO CONTRACTING DIVISION, 220 W MAIN STREET 3RD FLOOR, LOUISVILLE, KY 40202-2230, UNITED STATES.

Amendment / Modification

This document is Amendment 0002 to the plans for the UEPH BARRACKS project at Fort Campbell, KY. It revises drawings previously issued under Amendment 0001.

• The "INDEX OF DRAWINGS - VOL. 1" (Sheet G1002) and "INDEX OF DRAWINGS - VOL. 2" (Sheet G1003) have been updated to reflect changes made in Amendment 0002.
• Specific drawings revised in accordance with Amendment 0002 include:
  • CU101, CU102, CU103, CU104, CU105, CU106, CU107 (Utility Plans)
  • E-121, E-122, E-123, E-124, E-127, E-131, E-135, E-139 (First through Fifth Floor Power Plans)
  • E-402, E-403, E-411 (Enlarged Electrical Room Plans and Sectional Views)
  • E-604, E-605, E-608, E-612, E-613, E-614, E-615, E-616, E-617, E-618, E-619 (Electrical Schedules and Diagrams)
  • A-501, A-512, A-513 (Architectural Details - Wall and Roof Sections)
  • A-611, A-612, A-621, A-622, A-623, A-631, A-632, A-633, A-641, A-642, A-643, A-651, A-652, A-653 (Architectural Details - Doors and Frames)
  • A-661, A-662, A-663 (Architectural Details - Door Details)
  • A-671, A-672 (Architectural Details - Window and Frames Schedules and Types)
  • A-681, A-682, A-683 (Architectural Details - Aluminum Curtain Glass Wall Types and Details)
  • FA-106 (Fire Alarm and Mass Notification Systems Plan)
  • M-111, M-112, M-116, M-122, M-132, M-142, M-152 (HVAC Ductwork and Piping Plans)
  • M-401, M-402, M-403 (Mechanical Room Plans)
  • M-501, M-502, M-503, M-504, M-505 (Mechanical Details)
  • M-601, M-602, M-603, M-604, M-605 (Mechanical Equipment Schedules)
  • M-701, M-702, M-703, M-704, M-705, M-706, M-707, M-708, M-709, M-710, M-711, M-712, M-713, M-714, M-715, M-716, M-717 (HVAC Controls and Monitoring Schedules)
  • T-001, T-503, T-504 (Telecommunications Notes and Details)

This amendment does not appear to modify proposal deadlines or submission requirements, but bidders should review the updated drawings for any changes impacting their technical approach or cost estimates.

Amendment / Modification

This amendment (0001) to Solicitation W912QR26RA016 modifies the original solicitation by:

• Revised and Replaced Specification Sections: Several specification sections have been revised and replaced in their entirety. These include:
  • Table of Contents
  • Price Breakout Schedule
  • CUI Markings Removed from Evaluation Criteria
  • Structural Steel
  • Miscellaneous Metal Fabrications
  • Metal Ladders
  • Metal Railings
  • Plastic-Laminate-Clad Architectural Cabinets
  • Wall and Door Protection
  • Toilet Accessories
  • Wet Pipe Sprinkler Systems, Fire Protection
  • Fire Alarm / Mass Notification
• Added Specification Sections: The following specification sections have been added:
  • Electric Kitchen Equipment
  • Elastomeric Sheet Water Proofing
• Deleted Specification Sections: DFARS 252.204-7055 has been removed.
• Revised and Replaced Plan Sheets: Numerous plan sheets have been revised and replaced, including the Sheet Index, Civil Site Plans, Overall Utility Plan, Utility Plans, Exterior Elevations, Enlarged Dumpster Plans, Misc. Details, Foundation Plans, Typical Foundation Details, Typical Framing Details, and Column Schedule.
• Added Plan Sheets: An "Enlarged Bike Rack Sections and Details" plan sheet has been added.
• Deleted Plan Sheets: None were deleted for this amendment.
• Added Reference Documents: None were added for this amendment.
• Extended Proposal Due Date: The proposal due date has been extended from April 27, 2026, to May 12, 2026.

Specifications and Plan Sheets as detailed above.

The proposal due date has been extended to May 12, 2026. Offerors should review the revised specifications and plan sheets for any changes impacting their proposals.

Form / Attachment / Pricing Sheet

This document contains the "Index of Drawings" for Volume 1 and Volume 2 of the project "UEPH BARRACKS" at Ft. Campbell, KY. It serves as a table of contents for all architectural, civil, structural, mechanical, electrical, and plumbing drawings associated with the project.

• Volume 1 Index: Lists drawings related to General, Site Electrical, Site Telecommunication, Structural, Geotechnical, Survey Mapping, Civil, and Utility plans.
• Volume 2 Index: Lists drawings related to Interior, Fire Protection, Fire Alarm, Plumbing, Mechanical, and Electrical plans.
• Sheet Identification: Each drawing is identified by a sheet number and a descriptive name.
• Project Information: Includes Solicitation Number (W912QR26RA016), Contract Number, Project Name (UEPH BARRACKS), and location (Ft. Campbell, KY).

This document is crucial for bidders to understand the scope and organization of the project's technical documentation. It allows potential bidders to quickly locate specific drawings relevant to their bid preparation, such as site plans, structural details, or utility layouts, and to assess the overall complexity of the project's design and engineering.

Amendment / Modification

This amendment (0001) revises and replaces several specification sections, adds new specification sections, and deletes one specification section. It also revises and replaces numerous plan sheets and adds one new plan sheet. No plan sheets were deleted.

• Revised/Replaced Specifications: TABLE OF CONTENTS, PRICE BRAKOUT SCHEDULE, CUI MARKINGS REMOVED FROM EVALUATION CRITERIA, STRUCTURAL STEEL, MISCELLANEOUS METAL FABRICATIONS, METAL LADDERS, METAL RAILINGS, PLASTIC-LAMINATE-CLAD ARCHITECTURAL CABINETS, WALL AND DOOR PROTECTION, TOILET ACCESSORIES, WET PIPE SPRINKLER SYSTEMS, FIRE PROTECTION, FIRE ALARM / MASS NOTIFICATION.
• Added Specifications: ELECTRIC KITCHEN EQUIPMENT, ELASTOMERIC SHEET WATER PROOFING.
• Deleted Specifications: DFARS 252.204-7055.
• Revised/Replaced Plan Sheets: SHEET INDEX (G1002, G1003), CIVIL SITE PLAN (CS102, CS103, CS104, CS105), UTILITY PLAN (CU101, CU102, CU103, CU104, CU105, CU106, CU107), EXTERIOR NORTH AND SOUTH ELEVATIONS (A-201), ENLARGED DUMPSTER PLANS AND SECTION AND DETAILS (A-452), MISC DETAILS (A-691), FOUNDATION PLAN – AREA 1C (S-113), TYPICAL FOUNDATION DETAILS (S-502), TYPICAL FRAMING DETAILS (S-523), COLUMN SCHEDULE (S-601).
• Added Plan Sheets: ENLARGED BIKE RACK SECTIONS AND DETAILS (A-445).

The proposal due date has been extended from April 27, 2026, to May 12, 2026.

Other / Unclassified

This document is a meeting roster for the FY26 Barracks UEPH Site Visit held on March 24, 2026, at the FY26 UEPH Barracks Site in Fort Campbell, KY. It lists attendees' names, their organizations, phone numbers, and email addresses.

This roster provides contact information for individuals and companies who attended the site visit. This information may be useful for potential bidders to follow up with specific contacts or to understand which organizations are interested in or involved with this opportunity.

Other / Unclassified

This document is a sign-in sheet, likely from a site visit or pre-bid conference related to a SAM.gov opportunity. It records the names, organizations, phone numbers, and email addresses of attendees.

This document provides contact information for individuals who have expressed interest in the opportunity by attending a related event. Potential bidders may find this useful for networking or understanding the competitive landscape. The attendees listed are:

• Eric Som from 1 Priority (Phone: 415.243.4341, Email: esloan@golpnorry.com)
• Michael Poe from REED CIVIL (Phone: 615.618.7582, Email: MPOE@REEDCIVIL.COM)
• Anthony Eaton from Demo Plus (Phone: 832-344-0075, Email: aeaton@demoplusinc.com)

Solicitation / RFP / RFQ

This solicitation is for the design and construction of an Unaccompanied Enlisted Personnel Housing (UEPH) barracks at Fort Campbell, KY. The project aims to address a significant bed shortage by providing 312 new, fully functional modular dwelling units. The facility will include living quarters, bathrooms, kitchens, and communal laundry spaces. Supporting facilities include paving, parking, site improvements, and utility extensions. The estimated construction cost is between $25,000,000 and $100,000,000.

• Construction of a 5-story barracks to accommodate 312 unaccompanied enlisted personnel.

• Includes primary facilities (living quarters, baths, storage, service areas, building information systems, fire protection, alarm systems, antiterrorism measures, IDS, EMCS) and supporting facilities (site development, utilities, paving, parking, landscaping, signage).

• Heating and cooling provided by self-contained systems and a central system for common areas.

• Design to meet DoD Minimum Antiterrorism for Buildings standards.

• Incorporates sustainability/energy efficiency measures, aiming for a minimum 40-year life.

• Demolition of two existing buildings (6,389 Total SF).

• Air Conditioning estimated at 266 Tons.

• Design completed in-house by USACE Louisville (CELRL).

• Contract Type: Design-Bid-Build.

• Contract Number: W912QR26RA016.

• Project Number: 99248.

• Period of Performance: 10 calendar days after notice to proceed to 900 calendar days for completion.

• Contract Type: Firm Fixed Price.

• Funds are not presently available; award contingent on appropriation.

• Proposals are to be submitted electronically through the Procurement Integrated Enterprise Environment (PIEE) Solicitation Module.

• Submission Deadline: 10:00 PM local time on 27 APR 2026.

• Evaluation Factors: Proposals will be evaluated based on Past Performance, Management Approach, Small Business Participation Plan, and Price. Award will be a Best Value Trade-Off.

• Page limits apply to proposal submissions.

• Full and open procurement.

• Requires HUBZone 10% price evaluation.

• The design is based on the Fort Campbell-approved design with deviations to the current Army UEPH Standard.

• A waiver dated 7/16/23 was approved by Army IMCOM and AMC.

• The project is funded with Military (Army) Construction (MILCON) type Procurement dollars (Fiscal Year 26).

• SAM.gov is free of charge for both registrants and users.

Specifications / Technical Documents

This document contains a comprehensive set of specifications and technical requirements for various construction and installation aspects of the project at Fort Campbell, KY. It is organized into multiple divisions and sections, covering:

• Division 23 - Heating, Ventilating, and Air Conditioning (HVAC): Includes detailed specifications for HVAC air distribution, basic mechanical materials and methods, seismic bracing, testing, adjusting, and balancing (TAB), and instrumentation and control devices.
• Division 25 - Integrated Automation: Covers cybersecurity requirements for facility-related control systems, including network requirements, DDC hardware, and system hardening.
• Division 26 - Electrical: Details requirements for electrical systems, including low-voltage switchgear, power system studies, arc flash hazard analysis, interior distribution systems, and lightning protection systems.
• Division 31 - Earthwork: Outlines specifications for excavation, shoring, sheeting, backfill, compaction, and testing of various soil materials and drilled shafts.
• Division 32 - Exterior Improvements: Covers pavement markings, aggregate base course, drainage layers, concrete curbs, gutters, sidewalks, and exterior lighting.
• Division 33 - Utilities: Includes specifications for water utility distribution piping, sanitary sewerage, stormwater utilities, and telecommunications outside plant (OSP) cabling.

This document is crucial for any bidder involved in the construction or installation of systems at Fort Campbell. It provides the detailed technical requirements, standards, and procedures that must be followed. Bidders must carefully review the relevant sections pertaining to their scope of work to ensure compliance with all specifications, including material requirements, installation methods, testing procedures, and quality assurance measures. Failure to comply with these detailed specifications could lead to rejection of work, delays, and additional costs.

Specifications

This document contains specifications for various building components, including:

• Division 00 - Procurement and Contracting Requirements: Includes general requirements, special provisions, and sustainability reporting.
• Division 01 - General Requirements: Covers project schedule, submittal procedures, quality assurance, temporary construction facilities, and waste management.
• Division 02 - Existing Conditions: Details demolition procedures.
• Division 03 - Concrete: Specifies cast-in-place concrete requirements, including materials, mix design, and placement.
• Division 04 - Masonry: Outlines requirements for unit masonry.
• Division 05 - Metals: Includes specifications for structural steel, steel decks, post-installed anchors, and metal railings.
• Division 07 - Thermal and Moisture Protection: Covers insulation (board, spray foam), air barrier systems (self-adhering, fluid-applied), and flashing and sheet metal.
• Division 08 - Openings: Details requirements for steel doors and frames, aluminum doors and frames, access doors and panels, and aluminum windows.
• Division 09 - Finishes: Includes specifications for gypsum board, ceramic, quarry, and glass tiling, static-control resilient flooring, and paints and coatings.
• Division 10 - Specialties: Covers exterior signage, interior signage, fire extinguishers, and wall and door protection.
• Division 12 - Furnishings: Includes specifications for window blinds and entrance floor mats and frames.
• Division 13 - Special Construction: Addresses seismic control for nonstructural components.
• Division 14 - Conveying Equipment: Details requirements for electric traction passenger elevators.
• Division 21 - Fire Suppression: Covers standpipe systems, wet pipe sprinkler systems, and fire pumps.
• Division 22 - Plumbing: Includes general plumbing requirements, domestic water softeners, and water conditioners.
• Division 23 - Heating, Ventilating, and Air Conditioning (HVAC): Outlines requirements for HVAC systems.
• Division 25 - Integrated Automation: Covers cybersecurity for facility-related control systems and fire alarm systems.
• Division 26 - Electrical: Details electrical equipment and systems.

This comprehensive set of specifications outlines the technical requirements for materials, fabrication, installation, and testing for a wide range of building components. Bidders must carefully review these specifications to understand the exact requirements for each item they intend to supply or install. Key areas of focus include material standards, performance criteria (e.g., structural, fire, acoustical, wind resistance), installation procedures, quality assurance, and submittal requirements. Compliance with all referenced standards and regulations is mandatory.

Forms / Attachments / Pricing Sheets

This document, Volume 2 of 2 for the "UEPH BARRACKS FY26 BLDG 4098" project at Fort Campbell, KY, contains detailed architectural, mechanical, electrical, and telecommunications plans, along with associated schedules and specifications. It is essential for bidders to understand the full scope of work.

• Index of Drawings (Volume 2): Lists all drawings in this volume by discipline.
• Architectural & Interior Plans: Includes detailed plans for each floor (1st-5th) covering interior finishes, furniture, signage, and specific construction details.
• Fire Protection & Alarm Systems: Contains plans for standpipes, risers, pump room details, fire alarm, and mass notification systems, including sequences of operation.
• Plumbing Plans: Details sanitary and domestic piping, radon mitigation, mechanical room layouts, riser diagrams, and equipment schedules for pumps and water heaters.
• Mechanical (HVAC) Plans: Includes ductwork and piping plans for multiple floors, control schematics, and detailed equipment schedules for heat pumps, fan coil units, and air systems.
• Electrical Plans: Floor-by-floor power distribution, lighting plans, panel schedules, and lightning protection details.
• Telecommunications Plans: Outlines data and voice outlet locations, pathways, and general notes.
• Control Systems: Logic diagrams and system architecture for HVAC and lighting controls.

This volume provides the comprehensive technical specifications and layout information required for accurate bidding, material procurement, and execution of the UEPH Barracks project. Bidders must thoroughly review these plans to understand the scope of work, specific material requirements, installation standards, and technical compliance for all MEP (Mechanical, Electrical, Plumbing), fire protection, and telecommunications systems.

Forms / Attachments / Pricing Sheets

This collection of documents provides comprehensive architectural, engineering, and geotechnical plans and details for the UEPH Barracks project at Fort Campbell, KY. It is Volume 1 of 2, detailing the scope of construction, subsurface conditions, and structural requirements.

• Architectural & Engineering Plans: Includes cover sheets, sheet indexes, site plans, life safety plans, occupant load schedules, demolition plans, civil site plans, grading and drainage plans, utility plans, structural notes, design criteria, foundation notes, structural steel and concrete specifications, reflected ceiling plans, exterior elevations, wall sections, and details for doors, windows, stairs, and elevators.
• Geotechnical Information: Contains boring logs, test pits, soil classifications, drilling data, SPT results, rock core data, and graphical soil profiles, along with survey data and control point descriptions.
• Specific Plans: Covers demolition, civil site layout, concrete jointing, storm sewer systems, grading details, and utility layouts (water, sanitary, force main, storm sewer).
• Structural Details: Outlines design criteria based on IBC 2021, ASCE 7-16, and UFC standards, specifying requirements for structural steel, concrete, foundations, and various building components.

These documents are critical for bidders to understand the full scope of the project. They provide essential information for:

• Cost Estimating: Detailed plans and geotechnical data inform accurate cost estimations for materials, labor, and site preparation.
• Risk Assessment: Geotechnical reports highlight potential subsurface challenges.
• Methodology Planning: Drawings guide the selection of construction methods, equipment, and site preparation strategies.
• Design Compliance: Ensures adherence to structural integrity, building codes, and government requirements.
• Scope Definition: Clearly defines demolition, site work, utility installation, and building construction requirements.