Berthing and Messing Program Services

Amendment / Modification

• Amendment 0008 corrects the estimated man-hours of direct labor for the base period in section B.

• Section B - Supplies or Services & Prices or Costs: The "LEVEL OF EFFORT (COST TYPE CONTRACT) ('C'-TYPE CONTRACT) (SEP 2015)" section has been modified.

• Specifically, the estimated man-hours of direct labor for the base period and for all options exercised have been updated.

• The table detailing the estimated composition by labor category has been revised to reflect these changes.

• This amendment does not appear to change proposal deadlines or submission requirements. It focuses on correcting labor hour estimates within the contract's structure.

Amendment / Modification

Amendment 0007 has been issued for solicitation N0018926RL013.

Key changes include:

• Correction of hours for the "1st lead person" in Section B.

• Modifications to the Performance Work Statement (PWS).

• Changes to Sections L (Instructions, Conditions, & Notices to Offerors) and M (Evaluation Factors for Award).

• The solicitation's response date has been reopened and extended to 18 June 2026 at 10:00 AM ET.

• Section B (Supplies or Services & Prices or Costs)

• Performance Work Statement (PWS)

• Section L (Instructions, Conditions, & Notices to Offerors)

• Section M (Evaluation Factors for Award)

• The proposal submission deadline has been extended to 18 June 2026 at 10:00 AM ET. Offerors should ensure their proposals comply with the updated instructions and requirements in Sections L and M.

Statement of Work (SOW) / Performance Work Statement (PWS)

To provide COMUSFLTFORCOM with operational Organizational Level (O-level) support for assigned program Duty Crew Berthing Barges and other Service Craft (Non-Self Propelled). This involves day-to-day maintenance to keep installed equipment in a full-mission capable status.

• Provide O-Level support, including service call work, system/equipment familiarization, and port husbandry.

• Perform maintenance, minor repair, and other miscellaneous work requirements on assigned Duty Crew Berthing Barges and other Service Craft.

• Tasks include interior and exterior work, general electrical, plumbing, HVAC, galley, laundry, and painting services.

• Specific tasks include repair/replacement of flooring, bulkheads, ceilings, doors, windows, electrical fixtures, plumbing, HVAC components, galley/laundry equipment, and painting.

• Includes specialized services such as fire fighting equipment maintenance, security/flooding/fire protection alarm system repairs, and internal communication system services.

• Service calls are generally brief, requiring no more than eight working hours per worker.

• Emergency calls require on-site work within three hours of receipt.

• Urgent calls require on-site work within eight hours of receipt.

• Routine calls require completion within two working days of receipt.

• All work must be conducted in accordance with Original Equipment Manufacturer (OEM) specifications and relevant industry standards (e.g., NFPA, SSPC, ANSI).

• A SECRET clearance is required for all contracted employees.

• The PWS covers work in Hampton Roads (Norfolk, Newport News, Portsmouth) Virginia, Maine (Kittery), and Connecticut (New London and Groton) AOR.

• All contracted employees must possess and maintain a SECRET Clearance.

• Contractors must comply with all applicable safety and security regulations, including OPSEC and PII protection.

• Specific training requirements are outlined, including Cyber Security Awareness, Privacy Act, Antiterrorism, and Operations Security.

Questions & Answers / Clarifications

This document provides responses to vendor questions regarding the Berthing and Messing Program Services solicitation (N0018926RL013).

• Solicitation Extension: Amendment 0001 extended the solicitation response deadline to May 19, 2026, at 12:00 PM ET.
• Page Limitations: The cover page does not count towards the page limit. Specific page limits apply to Volume IV - Factor IV (Cost/Price) and Volume III - Factor III (Past Performance).
• Labor Categories & Locations: Updated PWS contains labor hours for each location. Offerors can adjust the Pricing Spreadsheet to add a column for location.
• Security Clearances: Verification of an active Secret Facility Clearance is required via DCSA's NISS. Contractors can provide this via separate email.
• Submission Format: PDF format is acceptable for FCL verifications and signed solicitation documents/amendments. Microsoft Office Word or Excel is required for other submissions.
• Past Performance: References must have at least 1-year of performance completed. IDIQ contracts can be used if specific orders are provided.
• Cost/Pricing: Fee is not allowed on non-labor items (ODCs, Travel, Material). FAR 52.222-42 percentages are based on government personnel fringe benefits.

Several amendments (0001, 0002, 0003, 0004, 0005, 0007) have been issued to address these questions and modify the solicitation. Offerors should review all amendments for complete details.

Amendment / Modification

This amendment extends the response deadline for Solicitation N0018926RL013.

• Section A - Solicitation/Contract Form

• The Response Due Time has been changed from 12:00 PM to 10:00 AM.

• The Response Due Date has been extended from 26 May 2026 to 29 May 2026.

Amendment / Modification

Amendment 0005 updates Section 5 in the Performance Work Statement (PWS).

• Section 5 of the PWS.

This amendment does not appear to modify proposal deadlines or submission requirements. Bidders should review the updated Section 5 of the PWS for any changes to requirements or scope.

Statement of Work (SOW) / Performance Work Statement (PWS)

To provide COMUSFLTFORCOM with operational Organizational Level (O-level) support for assigned program Duty Crew Berthing Barges and other Service Craft (Non-Self Propelled). This involves day-to-day maintenance to keep equipment in a full-mission capable status.

• Provide O-Level support for approximately 34 COMUSFLTFORCOM Duty Crew Berthing Barges and other Service Craft (Non-Self Propelled).

• Services include service call work, system/equipment familiarization, and port husbandry.

• Specific tasks include maintenance, minor repairs, and other miscellaneous work requirements.

• Work encompasses interior and exterior repairs, electrical work, plumbing, HVAC, painting, and specialized services like fire fighting equipment maintenance and security system repairs.

• Service calls are generally brief, requiring no more than eight working hours per worker.

• Emergency calls require on-site work within three hours of notification.

• Urgent calls require on-site work within eight hours of notification.

• Routine calls must be completed within two working days of receipt.

• All work must be performed in accordance with Original Equipment Manufacturer (OEM) specifications and relevant industry standards.

• The work will be performed in the Hampton Roads (Norfolk, Newport News, Portsmouth) Virginia, Maine (Kittery), and Connecticut (New London and Groton) AOR.

• Regular working hours are Monday through Friday, 0700 to 1530, excluding Federal Holidays. Overtime may be required.

• All contracted employees must possess and maintain a SECRET Clearance.

• Contractors must comply with all applicable safety, security, and environmental regulations.

• Specific training requirements are mandated for personnel, including Cyber Security Awareness, Privacy Act & PII, Antiterrorism, Operations Security, Records Management, Counterintelligence Awareness, Derivative Classification, Active Shooter and Active Shooter TTX, and Controlled Unclassified Information.

Questions & Answers / Clarifications

This document provides responses to vendor questions and clarifications regarding the Berthing and Messing Program Services solicitation (N0018926RL013).

• Facility Security Clearance (FCL): An active FCL at the Secret Level is required at the time of proposal submission. Sponsorship for an FCL during submittal is not sufficient.
• Solicitation Extension: Amendment 0001 extended the solicitation response due date to May 19, 2026, at 12:00 PM ET.
• Page Limitations: The cover page does not count towards page limits. Specific sections (cover sheet, list of tables, etc.) are permitted as separate, uncounted pages.
• Labor Categories & Locations: Updated PWS (Amendment 0002) includes labor hours for each location. WD for Connecticut is addressed in Amendment 0002.
• Proposal Submission: Proposals should be submitted via email. Offerors can send multiple emails if the submission exceeds 25 MBs. A specific subject line is not required but using the Solicitation number is recommended.
• Security Clearances: The requirement for contractor personnel to have an active Secret Facilities Security Clearance is firm and will not be waived.
• ODCs and Materials: Clarifications regarding the ODC table and materials tab are provided in Amendments 0003 and subsequent documents.
• Past Performance: Past performance must be performed within 5 years of the solicitation issuance date (confirmed in Amendment 0004). Past Performance Information Forms are included within the 15-page limit for Volume III, Factor III.
• Format: PDF is acceptable for FCL verifications and signed first pages of the solicitation and amendments.

Several amendments (0001, 0002, 0003, 0004, 0005) have been issued to address these questions, modify deadlines, clarify requirements, and update PWS and pricing information. Offerors must refer to these amendments for the most current details.

Statement of Work (SOW) / Performance Work Statement (PWS)

To provide COMUSFLTFORCOM with operational Organizational Level (O-level) support for assigned program Duty Crew Berthing Barges and other Service Craft (Non-Self Propelled). This involves day-to-day maintenance of installed equipment to maintain a full-mission capable status.

• Provide O-Level support, including service call work, system/equipment familiarization, and port husbandry.

• Maintenance and operations of assigned Duty Crew Berthing Barges and other Service Craft (Non-Self Propelled).

• Specific tasks include:

  • Service Calls (routine, emergency, urgent)
  • General Interior Work (flooring, bulkheads, ceilings, doors, ladders, handrails, fabric items, metal furniture)
  • General Exterior Work (seams, trim, downspouts, accessories, ladders, stairs, doors, hatches, covers, windows)
  • General Electrical Work (equipment, wiring, lighting, communication systems)
  • Security, Flooding, and Fire Protection Alarm System Repairs
  • Internal Communication (IC) System Services
  • Maintenance and Repair of Firefighting Equipment
  • Lock and Latch Installation Services
  • Plumbing and Pipefitting Services
  • Machine, Welding and Metal Working Services
  • Painting Services (interior and exterior)
  • Heating, Ventilation, Air Conditioning and Refrigeration (HVAC and R) Services
  • Galley and Food Service Equipment Services
  • Laundry Equipment Services
  • Local Area Network (LAN) Equipment Maintenance
  • Tank and Void Opening/Closures
  • Tag-out and Hot Work procedures
  • Departures from Specifications (DFS) submission
  • Port Husbandry (securing barges, utility hook-ups, delivery/receipt, towing preparation)
  • System/Equipment Familiarization
  • Cleaning and Sanitizing (including waxing, buffing, fumigation/extermination)
  • Site Assessments and Engineering and Design Plans

• All work must be performed in accordance with Original Equipment Manufacturer (OEM) specifications and relevant industry standards (e.g., SSPC, NFPA, ANSI, BHMA).

• Service calls have defined response times based on classification (Emergency: 3 hours, Urgent: 8 hours, Routine: 2 working days).

• Specific quality and industry standards for workmanship are detailed throughout the document.

• Work is required in the Hampton Roads (Norfolk, Newport News, Portsmouth) Virginia, Maine (Kittery), and Connecticut (New London and Groton) AOR.

• Regular working hours are 0700 to 1530, Monday through Friday, excluding Federal Holidays. Overtime may be required.

• All contracted employees must possess and maintain a SECRET Clearance.

• Contractor shall provide all required safety equipment, including Personal Protective Equipment (PPE).

• Security requirements include facility security clearance, personnel security clearances, and key control procedures.

• Operations Security (OPSEC) principles must be followed to protect sensitive unclassified information.

• Contractor personnel must comply with applicable training requirements (Cyber Security, Privacy Act, Antiterrorism, etc.).

• Labor categories and associated hours for specific locations are provided in Appendix A and Section 5.0.

Questions & Answers / Clarifications

This document provides responses to vendor questions regarding the Berthing and Messing Program Services solicitation (N0018926RL013).

• Facility Security Clearance (FCL): An active Secret Level FCL is required at the time of proposal submission, not just during processing.
• Solicitation Response Extension: Amendment 0001 extended the solicitation response deadline to May 19, 2026, at 12:00 PM ET.
• Page Limitations: The cover page does not count towards page limits. Specific sections (cover sheet, list of tables, etc.) are permitted as single pages and excluded from the page count.
• Labor Categories & WD: Updated PWS (Amendment 0002) contains labor hours for each location. Clarification on Connecticut WD applicability was also made in Amendment 0002.
• Proposal Submission: Proposals should be submitted via email. No specific subject line is required, but using the Solicitation number is recommended. Multiple emails can be used for submissions exceeding 25 MB.
• Security Clearance Verification: Facility Clearance verification can be provided via separate email, marked as CUI, to protect sensitive information.
• Past Performance: The government will accept annual CPARS evaluations for IDIQ contracts, but specific orders from the IDIQ must be provided as references.
• Labor Evaluation: Labor will be evaluated based on 100% straight time; uncompensated overtime will not be used in the evaluation.

Several amendments (0001, 0002, 0003, 0004) have been issued to address these questions, modify requirements, extend deadlines, and provide updated information. Bidders must review these amendments for complete details.

Amendment / Modification

This amendment (0004) makes the following changes:

• Updates Section L of the solicitation.

• Adds Appendix A to the Performance Work Statement (PWS).

• Extends the solicitation response date from May 19, 2026, at 12:00 PM ET to May 26, 2026, at 12:00 PM ET.

• Section L (Instructions, Conditions, & Notices to Offerors or Quoters)

• Performance Work Statement (PWS) - Appendix A

• Solicitation Response Due Date

• The deadline for proposal submissions has been extended by one week.

Amendment / Modification

This amendment (0003) makes the following changes:

• Updates the level of effort pricing sheet.

• Updates Section L (Instructions, Conditions, & Notices to Offerors or Quoters).

• Extends the deadline for submitting questions from May 06, 2026, at 12:00 PM ET to May 08, 2026, at 12:00 PM ET.

• Section L: Instructions, Conditions, & Notices to Offerors or Quoters

• Level of Effort Pricing Sheet

• Questions submission deadline

• The deadline for submitting questions has been extended to May 08, 2026, at 12:00 PM ET.

Form / Attachment / Pricing Sheet

This document is a Level of Effort (LOE) spreadsheet detailing the estimated labor hours and associated costs for various labor categories across different performance periods. It serves as a breakdown for potential bidders to understand the anticipated staffing and cost structure for the opportunity.

• Period of Performance: Details are provided for a Base Year (August 1, 2026 - July 31, 2027) through Option Year 4 (August 1, 2030 - July 31, 2031), and a period for FAR 52.217-8 (August 1, 2031 - January 31, 2032).
• CLINs: Breakdown includes Labor, Materials, ODCs, and Travel for each period, with a total value of $0.0 for all CLINs across all periods.
• Labor Categories: Specific roles such as FORE PERSON/SUPERVISOR, SYSTEM SUPPORT SPECIALIST, ENGINEERING TECHNICIAN VI, and various maintenance trades are listed.
• Locations: Estimated hours are broken down by location: Hampton Roads, VA; Groton, CT; and Kittery, ME.
• Hours: Both standard and overtime hours are estimated for each labor category and location.
• Cost Components: Fields for Direct Labor Rate, Overtime Rate, Fringe, Overhead, G&A, Fee, and Fully Burdened Labor Rate are included, though values are not populated in the provided text.

This spreadsheet provides a detailed breakdown of the anticipated labor effort required for the contract. Bidders should review the estimated hours per labor category and location to understand the scope of work and to inform their own resource planning and pricing strategies. The zero values for CLINs and the absence of populated cost rates indicate that detailed pricing information will be provided elsewhere or requires further clarification.

Amendment / Modification

This amendment (0002) to the solicitation N0018926RL013 makes the following changes:

• Updates the Performance Work Statement (PWS) with revised labor hours.

• Corrects additional line items within the pricing sheet.

• Adds language to Sections L (Instructions, Conditions, & Notices to Offerors) and M (Evaluation Factors for Award).

• Incorporates FAR clause 52.222-90, "Addressing DEI Discrimination by Federal Contractors" (Deviation 2026-00038), effective April 2026.

• Performance Work Statement (PWS)

• Pricing Sheet

• Section L (Instructions, Conditions, & Notices to Offerors)

• Section M (Evaluation Factors for Award)

• Incorporated FAR Clause 52.222-90

No explicit changes to proposal deadlines or submission requirements are detailed in this amendment, beyond the incorporation of new language and clauses that offerors must now address.

Form / Attachment / Pricing Sheet

This document is a Level of Effort (LOE) spreadsheet detailing the estimated labor hours and CLIN values for a potential contract, including a base year and four option years, plus a period for FAR 52.217-8. It also includes a "Materials" sheet listing various supplies and services with estimated quantities and units, but no pricing information.

• Summary Sheet: Outlines the Period of Performance for each year (Base Year: Aug 2026 - Jul 2027; Option Year 1: Aug 2027 - Jul 2028; Option Year 2: Aug 2028 - Jul 2029; Option Year 3: Aug 2029 - Jul 2030; Option Year 4: Aug 2030 - Jul 2031; FAR 52.217-8: Aug 2031 - Jan 2032). All CLIN values (Labor, Materials, ODCs, Travel) are listed as $0.0 for all periods.
• Materials Sheet: Lists specific supplies and services such as "Turnkey Hotel and Utility Hookup Solution," "KEVLAR mooring lines," "CHT System Overhaul," "Commercial-Grade Garbage Disposal," "Copper-Nickel (CU-NI) Valves," "interior deck surface preservation," "Craft cleaning and sanitization," "Galley Exhaust Ventilation cleaning," "fire extinguishers," and "HVAC components." Quantities and units are provided, but unit prices and total amounts are blank.
• Base Year, Option Years 1-4, and FAR 52.217-8 Sheets: Detail estimated labor hours and Full-Time Equivalents (FTEs) for various labor categories (e.g., FOREPERSON/SUPERVISOR, ELECTRICIAN, WELDER, HVAC MECHANIC). However, all rate and cost-related fields (Direct Labor Rate, Fringe $, Overhead $, G&A $, Subtotal, Fee $, Fully Burdened Labor Rate, Total Labor Cost) are left blank.

This document provides a breakdown of the estimated labor categories and hours required for each contract period, as well as a list of potential materials and services. Bidders should use this information to understand the potential scope of work and labor mix. The absence of pricing and specific cost details indicates that this spreadsheet serves as an estimate for planning purposes, and bidders will need to provide their own pricing based on the solicitation's requirements.

Statement of Work (SOW) / Performance Work Statement (PWS)

To provide COMUSFLTFORCOM with organizational level (O-level) support for assigned program Duty Crew Berthing Barges and other Service Craft (Non-Self Propelled). This involves day-to-day maintenance to keep equipment in a full-mission capable status and improve the local maintenance process.

• Provide O-Level support, including service calls, system/equipment familiarization, and port husbandry.

• Maintenance and operations for a list of COMUSFLTFORCOM Duty Crew Berthing Barges and other Service Craft (Non-Self Propelled).

• Specific tasks include:

  • Program Management Support
  • Service Calls (routine, emergency, urgent)
  • General Interior Work (flooring, bulkheads, overheads, doors, cabinets, etc.)
  • General Exterior Work (seams, trim, downspouts, accessories, doors, hatches, covers, windows, etc.)
  • General Electrical Work (wiring, outlets, switches, lighting, etc.)
  • Security, Flooding, and Fire Protection Alarm System Repairs
  • Internal Communication (IC) System Services
  • Maintenance and Repair of Firefighting Equipment
  • Lock and Latch Installation Services
  • Plumbing and Pipefitting Services
  • Machine, Welding, and Metal Working Services
  • Painting Services
  • HVAC and R Services
  • Galley and Food Service Equipment Services
  • Laundry Equipment Services
  • Local Area Network (LAN) Equipment Maintenance and Repairs
  • Tank and Void Opening/Closures
  • Tag-out and Hot Work
  • Port Husbandry
  • System/Equipment Familiarization
  • Cleaning and Sanitizing (including waxing and buffing of tile decks)
  • Fumigation and Extermination
  • Site Assessments and Engineering and Design Plans

• Work locations include Hampton Roads (Norfolk, Newport News, Portsmouth) Virginia, Maine (Kittery), and Connecticut (New London and Groton).

• Regular working hours are Monday through Friday, 0700 to 1530 hours, excluding Federal Holidays.

• Overtime, weekends, and federal holidays may be required.

• All contracted employees must possess and maintain a SECRET Clearance.

• Compliance with various safety, security, and environmental regulations (OSHA, NFPA, etc.).

• Specific requirements for personnel security clearances, background investigations, and access to government IT systems.

• Mandatory contractor training requirements.

Form / Attachment / Pricing Sheet

This document is a U.S. Department of Labor Wage Determination (Wage Determination No.: 2015-6135, Revision No.: 2) applicable to Windham town in Southeastern Connecticut. It outlines the minimum wage rates and fringe benefits required for various occupations under the Service Contract Act.

• Lists numerous occupational codes and titles.
• Specifies the minimum hourly wage rate for each occupation.
• Indicates that fringe benefits are required and follow the occupational listing.
• Includes notes on Executive Orders 13706 (Paid Sick Leave) and 13658 (Minimum Wage) and their applicability to contractors.
• Details requirements for vacation and paid holidays.
• Explains the process for requesting additional classifications and wage rates (conformance process).

This document is crucial for bidders to understand the minimum labor costs associated with performing services under a Service Contract Act covered contract in the specified geographic area. Bidders must ensure their proposals account for these mandated wage rates and fringe benefits to comply with federal regulations.

Questions & Answers / Clarifications

This document provides responses to vendor questions regarding the Berthing and Messing Program Services solicitation (N0018926RL013).

• Facilities Security Clearance (FCL): An offeror must possess an active Secret Level FCL at the time of proposal submission; it is not sufficient to be in the process of obtaining one.
• New Requirement: This is a new requirement, not a recompete or existing contract.
• Solicitation Extension: Amendment 0001 extended the solicitation response due date to May 19, 2026, at 12:00 PM ET.
• Page Limitations: The cover page does not count towards the page limit. Specific elements like a cover sheet, list of tables, figures, compliance matrix, table of contents, tabs, and dividers are permitted as single pages and excluded from the page count.
• Labor Categories & Locations: Updated PWS documents now include labor hours for each location. Amendment 0002 addresses the applicability of Wage Determinations (WD) for Connecticut.
• Proposal Submission: Proposals are to be submitted via email. While no specific subject line is required, using the Solicitation number is recommended. Offerors can send multiple emails if the submission exceeds 25 MB.
• Level of Effort Spreadsheet: Blank rows after the Government-provided Labor Categories have been removed to prevent confusion. See updated Section L in Amendment 0002.

Several amendments (0001 and 0002) have been issued to address questions, extend deadlines, and clarify requirements, including labor categories, locations, and submission details. Offerors should refer to these amendments for updated information.

Questions & Answers / Clarifications

This document provides responses to vendor questions regarding the Berthing and Messing Program Services solicitation (N0018926RL013).

• Facilities Security Clearance (FCL): Offerors must possess an active FCL at the Secret Level at the time of proposal submission, as stated in Section L of the solicitation.
• Project Type: This is a new requirement, not an incumbent or recompete.
• Solicitation Response Extension: Amendment 0001 to Solicitation N0018926RL013 has extended the response deadline. The new deadline is May 19, 2026, at 12:00 PM ET, moved from the original May 12, 2026, deadline.

The primary impact is the extension of the proposal submission deadline, providing bidders with additional time to respond.

Amendment / Modification

• The response due date for the solicitation has been extended.

• Section A - Solicitation/Contract Form

• The proposal submission deadline has been moved from 12 May 2026 at 12:00 PM ET to 19 May 2026 at 12:00 PM ET.

Questions & Answers / Clarifications

This document provides responses to vendor questions regarding the Berthing and Messing Program Services solicitation (N0018926RL013).

• Facilities Security Clearance (FCL): Offerors must possess an active FCL at the Secret Level at the time of proposal submission. An offer will not be accepted without this verification, even if an FCL is in process under sponsorship. This is based on Section L of the solicitation.

• Project Type: This requirement is a new project and not an incumbent or recompete.

• The clarification on FCL requirements emphasizes a critical submission criterion. Offerors must ensure they meet this requirement by the proposal submission deadline.

• The confirmation that this is a new requirement may influence how offerors approach their proposal strategy, as there is no direct incumbent performance to reference.

Statement of Work (SOW) / Performance Work Statement (PWS)

To provide COMUSFLTFORCOM with organizational level (O-level) support for assigned program Duty Crew Berthing Barges and other Service Craft (Non-Self Propelled). This involves day-to-day maintenance to keep equipment in a full-mission capable status and improve the local maintenance process.

• Provide O-Level support, including service calls, system/equipment familiarization, and port husbandry.

• Maintain and operate approximately 34 COMUSFLTFORCOM Berthing and Messing Program Duty Crew Berthing Barges and other Service Craft.

• Tasks include program management support and providing service calls for maintenance, minor repairs, and miscellaneous work.

• Service calls are categorized as emergency, urgent, or routine, with specific response and completion time requirements for each.

• General interior and exterior work, including repairs and replacement of flooring, carpeting, tile, bulkheads, overheads, trim, doors, hatches, covers, windows, and associated hardware.

• General electrical work, including maintenance, repair, and replacement of electrical equipment.

• Repair of security, flooding, and fire alarm systems.

• Services for internal communication systems, including telephone and barge security systems.

• Maintenance and repair of firefighting equipment.

• Lock and latch installation services.

• Plumbing and pipefitting services.

• Machine, welding, and metalworking services.

• Painting services for interior and exterior surfaces.

• HVAC and R services.

• Galley and food service equipment services.

• Laundry equipment services.

• Preventative maintenance and corrective repairs for Local Area Network (LAN) Equipment.

• Tank and void opening and closures.

• Tag-out and hot work procedures.

• Port husbandry services, including securing barges, assisting with towing preparations, and system startup.

• System/equipment familiarization training for customers.

• Deep cleaning and sanitizing of the entire craft, including waxing and buffing of tile decks, fumigation, and extermination.

• Site assessments and engineering and design plans.

• Work will be performed in Hampton Roads (Norfolk, Newport News, Portsmouth) Virginia, and Maine (Kittery), Connecticut (New London and Groton) AOR.

• All contracted employees must possess and maintain a SECRET Clearance.

• Contractor shall provide all required safety equipment, including personal protective equipment (PPE).

• Personnel security requirements include obtaining and possessing a secret security clearance and a Facility Clearance at the Secret level.

• Compliance with all applicable directives, including OSHA, NFPA, EPA, and Navy specific instructions.

• Mandatory contractor training requirements must be met.

Solicitation / RFP / RFQ

This solicitation is for a Cost Plus Fixed Fee (CPFF) task order for "Living Barge" services. The government is seeking proposals that represent the best value, considering facilities security clearance, technical approach, past performance, and cost/price. Award is anticipated without exchanges, and a competitive range is not expected.

• The core requirement is for "Living Barge" services, detailed in the Performance Work Statement (PWS).

• The solicitation includes multiple option periods, extending the potential period of performance.

• Specific labor categories and estimated hours are provided for the base period and options.

• Contract Type: Cost Plus Fixed Fee (CPFF) task order.

• Period of Performance: The base period is from August 1, 2026, to July 31, 2027. Multiple option periods extend through July 31, 2032.

• Estimated Value: Not explicitly stated, but the Level of Effort (LOE) is detailed for the base and option periods.

• Proposal Submission Deadline: May 12, 2026, 12:00 PM Local Time.

• Submission Method: Proposals must be submitted electronically via email to Samantha Ballance and Zackery Bowman.

• Evaluation Factors:

  • Phase I: Facilities Security Clearance (Acceptable/Unacceptable)
  • Phase II: Technical Approach (more important than Past Performance), Past Performance, and Cost/Price.
  • Technical Approach is weighted equally between Performance Approach and Staffing & Management Approach.
  • Non-Cost/Price factors are considered significantly more important than Cost/Price.

• Proposal Structure: Proposals must be submitted in four volumes: Facilities Security Clearance, Technical Approach, Past Performance, and Cost/Price Proposal.

• The acquisition is set aside for Small Business.

• NAICS Code: 336611 (Shipbuilding and Repairing

• Size Standard: 1300 employees.

• Offerors must have an active Secret Facilities Security Clearance (FCL) at the time of proposal submission.

• All electronic files must be compatible with Microsoft Office Suite version 2016 (Excel).

• Offerors are instructed to submit their most favorable terms in their initial proposal.

Other / Unclassified

This document outlines the Contract Administration Plan (CAP) for Cost Type Contracts. It details the specific responsibilities and duties assigned to various government personnel involved in contract administration, including the Procuring Contract Office (PCO), Contract Administration Office (CAO), Defense Contract Audit Agency (DCAA), paying office, Contracting Officer's Representative (COR), and Technical Assistant (TA).

This document is crucial for potential bidders as it clarifies the roles and responsibilities of government personnel who will manage and oversee the contract post-award. Understanding these roles, particularly those of the PCO and COR, helps bidders anticipate communication channels, points of contact for technical guidance, and the processes for contract surveillance, invoice review, and modifications. It emphasizes that only the PCO or CAO has the authority to modify contract terms, and the COR acts as the primary technical interface but cannot issue contractual changes. This information is vital for bidders to understand the administrative framework of the contract and ensure compliance with government procedures.

Form / Attachment / Pricing Sheet

This document is a Past Performance Report Form requested by Fleet Logistics Center Norfolk (FLCN) Contracting Department. It is used to evaluate a contractor's past performance on previous contracts and efforts, which relates to their probability of successfully accomplishing the work required for an upcoming solicitation (N0018926RL013).

The form requires information about:

• The company submitting the report (Company's Name, POC, Email, Contract/PO No., Amount, Type, Period of Performance, Business Address, Phone Number).

• Details on the contractor's performance, including:

  • Quality (recruiting, retention, meeting contract requirements, customer satisfaction, rework/deficiency reports, innovative applications).
  • Timeliness (meeting performance schedules, timeliness of information/reports/invoicing).
  • Responsiveness (ability to respond to customer concerns, problem isolation and resolution, cost control).
  • Additional observations (strengths, weaknesses, satisfaction with award, similar efforts, other contacts).

• The form should be completed and returned by the solicitation's due date.

• It should be sent to the FLCN Contracting Department, Attn: Zackery Bowman.

• Crucially, the form should NOT be returned to the contractor who originated the request.

• Bidders should provide detailed responses in the provided text fields or attach additional pages if more space is needed.

This form is critical for bidders as it is the mechanism through which the government will gather past performance information on offerors. The responses provided on this form will directly influence the evaluation of a bidder's past performance, a key factor in contract award decisions. Bidders should ensure their past performance is accurately and favorably represented.

Form / Attachment / Pricing Sheet

This document is a "Past Performance Information Form" that bidders are required to complete. It is used by the government to gather information about an offeror's past performance on similar contracts, which is a critical factor in evaluating proposals.

• Name of Offeror: The name of the bidding company.
• Contract Number, order number, or identifier: Details of the past contract.
• Customer Name & Location: Information about the customer for the past contract.
• Customer Point of Contact: Name and title of the contact person for the past contract.
• Telephone Number and e-mail address: Contact details for verification.
• Total dollar value: The total value of the past effort, broken down into annual increments.
• Period of Performance: The start and end dates of the past contract, along with the dollar value for that period.
• Number of personnel (FTE) performing per year: Average full-time equivalent personnel.
• Detailed description of work performed: A narrative explaining the work done and its relevance to the current solicitation's scope.
• Scope: A summary of the work performed.
• Magnitude: An indication of the scale or size of the work performed.
• Subcontractors Utilized: Information on any subcontractors used, the extent of their work, and their dollar value.

Bidders must accurately and thoroughly complete this form to provide evidence of their relevant past performance. The information submitted will be used by the government to assess the offeror's capability to successfully perform the requirements of the current opportunity. Failure to provide complete or relevant information may negatively impact the evaluation of the proposal.

Form / Attachment / Pricing Sheet

This document is a "Contractor Discrepancy Report" form. It is used to formally document and track discrepancies identified by a contractor or the government related to a contract or task order. It facilitates communication and resolution of issues.

• Contract Information: Fields for Contract Number and Task Order Number.
• Parties Involved: Sections for "TO:" (Contractor's name and address) and "FROM:" (Facility Name and address, including COR).
• Discrepancy Details: A section to describe the "DISCREPANCY (INCLUDE REFERENCE)".
• Signatures and Dates: Includes signature blocks for the Contracting Officer's Representative (COR), Contractor's Representative, and Contracting Officer, along with corresponding dates.
• Response Section: A dedicated area for "CONTRACTOR RESPONSE AS TO CAUSE AND CORRECTIVE ACTION TAKEN" and "GOVERNMENT COMMENT ON RESPONSE".

While this is a form, bidders should be aware of its existence. If this form is referenced in a solicitation or contract, it indicates a formal process for reporting and resolving issues. Understanding this form helps bidders anticipate how contractual issues will be managed and documented.

Form / Attachment / Pricing Sheet

This document is a Wage Determination issued by the U.S. Department of Labor, Employment Standards Administration, Wage and Hour Division. It establishes minimum wage rates and fringe benefits for various occupations performing work under the Service Contract Act in specific geographic areas (North Carolina Counties of Currituck, Gates; Virginia Counties of Chesapeake, Gloucester, Hampton, Isle of Wight, James City, Mathews, Newport News, Norfolk, Poquoson, Portsmouth, Suffolk, Virginia Beach, Williamsburg, York).

• Lists numerous occupations with corresponding wage rates.
• Includes footnotes for specific occupations (e.g., Computer Employees, Air Traffic Controllers, Weather Observers).
• Details requirements for paid sick leave (Executive Order 13706) and minimum wage adjustments (Executive Order 13658).
• Outlines benefits such as vacation, holidays, health & welfare, and uniform allowances.
• Provides guidance on the conformance process for unlisted classifications.

This document is critical for bidders to understand the minimum labor costs associated with performing services under the Service Contract Act in the specified regions. It directly impacts the pricing of proposals by defining the required wage rates and fringe benefits for various job classifications. Bidders must ensure their proposed wages meet or exceed these determinations to be compliant.

Wage Determination

This document is a U.S. Department of Labor Wage Determination (No. 2015-4011, Revision No. 32) applicable to the Service Contract Act for specific towns in YORK COUNTY, MAINE: Eliot and Kittery. It outlines the minimum wage rates and fringe benefits required for various occupations.

• Applicability: This wage determination sets the minimum labor standards for covered contracts in the specified locations.
• Occupational Listings: The document provides a comprehensive list of job titles, corresponding occupational codes, and their required minimum hourly wage rates.
• Fringe Benefits: In addition to wages, specific fringe benefits are mandated. These include:
  • Health & Welfare: $5.55 per hour (up to 40 hours/week) or $222.00 per week / $962.00 per month.
  • Health & Welfare (EO 13706): $5.09 per hour (up to 40 hours/week) or $203.60 per week / $882.27 per month (for SCA-covered contracts also covered by EO 13706).
• Executive Orders: The document references Executive Order 13706 (Paid Sick Leave) and Executive Order 13658 (Minimum Wage), outlining contractor obligations for paid sick leave and minimum hourly wages (at least $13.30 per hour for 2025, subject to annual adjustment).
• Vacation and Holidays: Standard provisions for paid vacation (2 weeks after 1 year, 3 weeks after 5 years, 4 weeks after 15 years) and a minimum of eleven paid holidays are detailed.
• Hazardous Pay: Differentials are specified for work involving ordnance, explosives, and incendiary materials (8% for high hazard, 4% for low hazard).
• Uniform Allowance: Requirements for providing uniforms and reimbursement for cleaning/maintenance are outlined.
• Conformance Process: Procedures for classifying and determining wage rates for occupations not listed in the determination are described, requiring contractor submission of a report to the contracting officer.

This document is crucial for bidders to accurately estimate labor costs for their proposals. It ensures compliance with federal labor laws by defining the minimum wages, benefits, and working conditions that must be offered to employees performing work under the contract in the specified geographic area.

Statement of Work (SOW) / Performance Work Statement (PWS)

This Quality Assurance Surveillance Plan (QASP) is a Government-developed document to ensure systematic quality assurance methods are used in administering Performance Based Service Contracts (PBSC). Its purpose is to ensure contractors perform according to specified metrics, the Government receives the contracted quality of services, and payment is only for acceptable services.

This QASP outlines the Government's surveillance oversight of the Contractor's quality control efforts. It is not part of the contract itself but supports the Contractor's development of their quality management plan. The QASP details methods for monitoring services and deliverables.

The QASP Matrix identifies specific performance elements, requirements, acceptable quality levels (AQLs), and surveillance methods. Key performance areas include:

• PWS Compliance and Fulfillment: Tasks/Services must be accurate, high quality, and delivered on time.
• Requested Deliverables: Deliverables must be received on schedule and meet quality standards.
• Contractor Personnel Qualifications: Personnel must meet minimum qualifications specified in the PWS.
• Complaints: Limits on substantiated complaints against contractor personnel.
• Physical Security: Full compliance with physical security requirements.
• Invoicing: Monthly invoices must be timely and accurate.
• Monthly Reports: Reports must be received by the 5th of each month and meet PWS requirements.

Acceptable Quality Levels (AQLs) range from 95% to 100% compliance depending on the performance element.

Not explicitly detailed in this document, but it applies to services provided under a Performance Based Service Contract.

• Government Responsibilities: The Contracting Officer (CO) and Contracting Officer Representative (COR) have defined roles in implementing the QASP.
• Surveillance Methods: Include COR assessment, customer feedback, random checks/inspections, and review of reports and resumes.
• Documentation: A Quality Assurance Surveillance file will be maintained by the COR, including appointment letters, contract copies, QASP revisions, team member lists, receiving reports, and meeting memoranda.
• Analysis of Contractor Performance: Conducted monthly to assess performance and determine surveillance levels or corrective actions.
• Incentives/Disincentives: Failure to achieve satisfactory performance may result in termination, loss of future contracts, non-exercise of options, or issuance of Contract Discrepancy Reports (CDRs).

Form / Attachment / Pricing Sheet

This document is an Excel spreadsheet containing detailed breakdowns of estimated labor hours, materials, and other direct costs (ODCs) across the base year and option years for a potential contract. It also includes a "Materials" sheet listing specific supplies and services with estimated quantities.

• Summary Sheet: Outlines the period of performance for each contract year (Base Year through Option Year 4, plus FAR 52.217-8 period) and lists CLINs for Labor, Materials, ODCs, and Travel, with a total value of $0.0 for each period.
• Materials Sheet: Details various supplies and services required, such as "Turnkey Hotel and Utility Hookup Solution," "KEVLAR mooring lines," "Turnkey CHT System Overhaul," "Commercial-Grade Garbage Disposal," "Copper-Nickel (CU-NI) Valves," "interior deck surface preservation," and "HVAC components." It includes estimated quantities and units but no pricing information.
• Base Year, Option Years 1-4, and FAR 52.217-8 Sheets: These sheets provide an estimated Level of Effort (LOE) for various labor categories (e.g., 1st FORE PERSON/SUPERVISOR, SYSTEM SUPPORT SPECIALIST, ELECTRICIAN, WELDER) with total hours and FTEs. However, direct labor rates, fringe benefits, overhead, G&A, fee percentages, and total costs are left blank.

This spreadsheet provides a detailed breakdown of the anticipated labor categories, hours, and specific materials/services that may be required. While it does not contain pricing or total estimated values, it is crucial for bidders to understand the scope of work and the types of resources needed to develop accurate proposals and cost estimates. The blank fields for pricing and burdened rates indicate that bidders will need to provide this information in their proposals.