Outdoor Static Model Display Refurbishment

Statement of Work (SOW) / Performance Work Statement (PWS)

To refurbish six (6) outdoor static display models of aircraft located outside of Buildings 553 and 556 at Wright Patterson Air Force Base. The goal is to maintain the aesthetic integrity, structural safety, and historical accuracy of these fiberglass, foam, composite, or aluminum models.

• Provide all necessary supervision, labor, materials, equipment, tools, transportation, and quality control.

• Fully refurbish the cosmetic appearance and protective coatings of the replica aircraft.

• Repair or replace any missing components to match original condition.

• Reproduce all national insignia, squadron tail codes, tail numbers, and special markings.

• Contractor must demonstrate past experience refurbishing outdoor static display models.

• Refurbishment steps include: surface preparation, structural reinforcement, corrosion repair, priming, painting, marking reproduction, and application of long-term weather and UV protection.

• Adhere to applicable documents: AFI 84-101, Federal Standard 595C, and ASTM G154.

• Conduct an initial condition assessment with high-resolution photography and a written report identifying specific types of degradation (cracking, delamination, fading, etc.).

• All personnel must complete base-specific safety, environmental, and security training.

• A two (2) year warranty against peeling, cracking, or significant fading is required.

• Period of Performance: Work to be completed by September 30, 2026.

• Place of Performance: Off-site. The contractor will provide their own workspace.

• Digital photo package (25%, 50%, 75%, 100% completion) for each model.

• Condition assessment and repair log within 30 days of contract award.

• Paint and material technical data sheets and VOC compliance documentation within 30 days of project completion.

• Project Manager: Experience in composite repair and high-performance exterior coatings; prior military or commercial aviation composite shop experience preferred.

• Painters: Experience with two-part military or marine polyurethane systems; experience on outdoor static displays highly desirable.

• Security: Contractor personnel must comply with local force protection and badging requirements.

• Warranty: Defects during the two-year warranty period must be corrected within 30 days of notification.

Form / Attachment / Pricing Sheet

This document details missing or broken pieces from outdoor aircraft static display models, specifically an F-15 and a B-1. It serves to identify the condition of these displays.

• F-15: The stabilizer and tailpiece are missing.
• B-1: A small piece has fallen off, the name of which is unknown.
• The document includes images illustrating the damage or missing parts for both aircraft models.

This document is relevant to bidders as it highlights specific maintenance or repair needs for outdoor aircraft static display models. It informs potential vendors about the current state of the displays and the nature of the required repairs or replacements.

Questions & Answers / Clarifications

This document provides responses to vendor inquiries regarding the Combined Synopsis/Solicitation FA8601-26-Q-0023 for Outdoor Static Model Display refurbishment.

• Contract Type: This is a new requirement, not a continuation of an incumbent contract.
• Site Visits: Two optional site visits are scheduled: April 2, 2026, at 8:00 AM ET, and April 15, 2026, at 10:30 AM ET. Interested parties must submit full name, driver's license number, and email address to attend.
• Transport/Logistics: The contractor is responsible for removal, transport, refurbishment, and reinstallation of the display models, including any foundations, anchoring systems, or structural supports. Models are fixed as single units and will be removed from their concrete bases for refurbishment and reinstalled.
• Scope of Work: Surface preparation for coatings includes removal of loose/peeling coatings and cleaning. Full removal to bare substrate is not required if existing coatings are intact. The contractor is responsible for identifying and sourcing correct paint codes and replicating camouflage patterns.
• Structural/Corrosion Repair: Structural reinforcement involves restoring failing components. Corrosion repair goes beyond cosmetic fixes and includes identification, removal, treatment, and repair to ensure long-term durability.
• Latent Damage: Any hidden damage discovered during work must be documented and brought to the Contracting Officer's attention for evaluation and potential modification.
• Markings/Documentation: The Government will not provide reference drawings for markings/insignia; contractors must perform their own research and take measurements during the site visit.
• Storage: The contractor is responsible for providing secure storage during refurbishment.
• Warranty: A two-year warranty against peeling, cracking, or significant fading is required.
• PWS Display 5: The label for Display 5 is mislabeled; it is a photo of an F-35, not an F-16.
• Missing Parts: A document detailing missing parts is attached to the solicitation.

The solicitation response deadline has been extended to April 22, 2026, at 3:00 PM ET, to accommodate the second site visit.

Questions & Answers / Clarifications

This document provides responses to vendor inquiries regarding the Combined Synopsis/Solicitation FA8601-26-Q-0023 for Outdoor Static Model Display refurbishment.

• New Requirement: This is a new requirement, and there is no incumbent contractor or previous contract number.

• Site Visit: An optional site visit was scheduled for Thursday, April 2, 2026, at 8:00 AM ET, with a registration deadline of March 31, 2026. A second optional site visit was scheduled for Wednesday, April 15, 2026, at 10:30 AM ET, with a registration deadline of April 13, 2026.

• Transport/Logistics: The contractor is responsible for removal, reinstallation, and transport of the display models, including any foundations, anchoring systems, or structural supports. The models are fixed as single units and mounted on concrete bases, which are to remain in place. Support poles are not included in the scope of work for surface preparation and coating.

• Scope of Repairs: Structural reinforcement involves restoring failing or damaged components. Corrosion repair goes beyond cosmetic fixes to ensure long-term durability. Latent or unidentified damage discovered during work will be evaluated and addressed via contract modification or change order.

• Coatings/Standards: Surface preparation must ensure proper adhesion and long-term performance. Full removal to bare substrate is not required if existing coatings are intact, but all surfaces must meet performance requirements. Specific coating systems or MIL-spec requirements beyond referenced standards are not mandated.

• Markings/Documentation: The Government will not provide reference drawings or historical documentation for markings/insignia. Contractors must perform their own research and take measurements/photographs during the site visit. No existing condition assessments or inspection reports are available.

• Warranty: A two-year warranty against peeling, cracking, or significant fading is required.

• Mislabeled Photo: PWS Display 5, showing an F-16, is mislabeled; the refurbishment applies to an F-35.

• The solicitation response deadline was extended to April 22, 2026, at 3:00 PM ET to accommodate the second site visit.

Questions & Answers / Clarifications

This document provides responses to vendor inquiries regarding the Combined Synopsis/Solicitation FA8601-26-Q-0023 for an Outdoor Static Model Display.

• Contract Type: This is a new requirement, not a continuation of an incumbent contract.
• Site Visits: Optional site visits are scheduled for April 2, 2026, at 8:00 AM ET and April 15, 2026, at 10:30 AM ET. Interested parties must register by submitting full name, driver's license number, and email address to specified contacts by the stated deadlines.
• Transport/Logistics: The contractor is responsible for removal, transport, refurbishment, and reinstallation of the display models. Models are fixed as single units and mounted on concrete bases which are to remain in place. Support poles are not included in the scope of work for surface preparation and coating.
• Scope/Repairs: Structural reinforcement involves restoring integrity, while corrosion repair goes beyond cosmetic fixes to ensure long-term durability. Latent or unidentified damage discovered during work must be documented and brought to the Contracting Officer's attention for evaluation and potential modification.
• Coatings/Standards: Surface preparation must ensure proper adhesion and long-term performance. Full removal to bare substrate is not required if existing coatings are intact, but all surfaces must meet performance requirements. Specific coating systems or MIL-spec requirements beyond referenced standards are not mandated.
• Markings/Documentation: The Government will not provide reference drawings or historical documentation for markings and insignia. Contractors must conduct their own research, take measurements, and photographs during the site visit. No existing condition assessments or inspection reports are available.
• Storage: The contractor is responsible for providing secure storage during removal, transport, refurbishment, and until reinstallation.
• Warranty: A two-year warranty against peeling, cracking, or significant fading is required.

The solicitation response deadline has been extended to April 22, 2026, at 3:00 PM ET to accommodate the second site visit.

Questions & Answers / Clarifications

This document provides responses to vendor inquiries regarding the Combined Synopsis/Solicitation FA8601-26-Q-0023 for Outdoor Static Model Display.

• New Requirement: This is a new requirement, and there is no incumbent contractor or previous contract number.
• Site Visit: An optional site visit is scheduled for Thursday, April 2, 2026, at 8:00 AM ET. Interested vendors must submit full name, driver's license number, and email address to amanda.hoyng@us.af.mil and tracy.ferrise@us.af.mil by Tuesday, March 31, 2026, at 3:00 PM ET.
• Transport/Logistics: The contractor is responsible for removal and reinstallation of display models, including foundations and anchoring systems. The models are fixed as single units and mounted on concrete bases that will remain in place. Support poles are not part of the scope for surface preparation and coating.
• Scope/Repairs: Structural reinforcement involves restoring failing components. Corrosion repair goes beyond cosmetic fixes and includes identification, removal, treatment, and repair for long-term durability. Latent or unidentified damage discovered during work must be documented and brought to the Contracting Officer's attention for evaluation and potential modification.
• Coatings/Standards: Surface preparation must ensure proper adhesion and long-term performance. Full removal to bare substrate is not required if existing coatings are intact, but all surfaces must meet performance requirements. Specific coating systems or MIL-spec requirements beyond referenced standards are not mandated.
• Markings/Documentation: The Government will not provide reference drawings or historical documentation for markings and insignia. Contractors must perform their own research and take measurements/photographs during the site visit. No existing condition assessments or inspection reports are available.
• Warranty/Acceptance: Final acceptance will be based on a visual inspection verifying compliance with PWS requirements, including appearance, coating application, markings/insignia, structural integrity, and workmanship. A two-year warranty against peeling, cracking, or significant fading is required.

This Q&A document clarifies key aspects of the solicitation, including the scope of work, logistical responsibilities, repair expectations, and acceptance criteria. It emphasizes the contractor's responsibility for research, site assessment, and execution of repairs and refurbishment. The site visit details and registration deadline are critical for interested bidders.

Questions & Answers / Clarifications

This document provides responses to vendor inquiries regarding the Combined Synopsis/Solicitation FA8601-26-Q-0023 for Outdoor Static Model Display.

• New Requirement: This is a new requirement, and there is no previous contract number.
• Site Visit: An optional site visit is scheduled for Thursday, April 2, 2026, at 8:00 AM ET. Interested vendors must submit full name, driver's license number, and email address to amanda.hoyng@us.af.mil and tracy.ferrise@us.af.mil by Tuesday, March 31, 2026, at 3:00 PM ET.
• Transport/Logistics: Display models are fixed as single units and will be removed from their concrete bases for refurbishment and reinstalled. The contractor is responsible for removal and reinstallation, including foundations, anchoring systems, or structural supports. Support poles are not in the scope of work. The contractor is responsible for assessing site conditions and providing rigging and transportation.
• Scope/Repairs: Structural reinforcement means restoring failing or damaged components to ensure structural integrity. Corrosion repair goes beyond cosmetic fixes to ensure long-term durability. Latent or hidden damage discovered during work must be documented with photos and reported to the Contracting Officer for evaluation via modification or change order.
• Coatings/Standards: Surface preparation must ensure proper adhesion and long-term performance, including removal of loose/peeling coatings and cleaning. Full removal to bare substrate is not required if existing coatings are intact. Specific coating systems or MIL-SPEC requirements beyond referenced standards are not mandated.
• Markings/Insignia: The Government will not provide reference drawings. Contractors must perform their own research and take measurements/photographs during the site visit to accurately replicate markings and insignia.
• Warranty/Acceptance: Final acceptance will be based on a walk-through inspection verifying PWS compliance, including appearance, coating, structural integrity, and workmanship. A two-year warranty against peeling, cracking, or significant fading is required.

This Q&A document clarifies key aspects of the solicitation, including the nature of the requirement, logistical considerations for transport and refurbishment, repair standards, coating requirements, and acceptance criteria. It emphasizes the importance of the site visit for bidders to gather necessary information, particularly regarding measurements and site conditions. The deadline for site visit attendance confirmation has passed (March 31, 2026).

Questions & Answers / Clarifications

This document provides responses to vendor inquiries regarding the Combined Synopsis/Solicitation FA8601-26-Q-0023 for the Outdoor Static Model Display.

• Contract Status: This is a new requirement, and there is no incumbent contractor or previous contract number to provide.
• Site Visit: An optional site visit will be held on Thursday, April 2, 2026, at 8:00 AM Eastern Time (ET) to allow vendors to evaluate the current conditions of the static model displays.

Vendors planning to attend the site visit must submit their full name (as it appears on their driver's license), driver's license number, and email address to amanda.hoyng@us.af.mil and tracy.ferrise@us.af.mil no later than Tuesday, March 31, 2026, at 3:00 PM ET.

Questions & Answers / Clarifications

This document provides a response to an inquiry regarding the Combined Synopsis/Solicitation FA8601-26-Q-0023, Outdoor Static Model Display.

• Question: Is this a brand new contract, or was there an incumbent performing these services? If not brand new, please provide the current/previous contract number.
• Answer: This is a new requirement, and as such, there is no previous contract number to provide.

This clarification confirms that the opportunity is a new requirement and does not have a preceding contract.

Statement of Work (SOW) / Performance Work Statement (PWS)

To refurbish six (6) outdoor static display aircraft models at Wright Patterson Air Force Base to maintain their aesthetic integrity, structural safety, and historical accuracy.

• Provide all necessary supervision, labor, materials, equipment, tools, transportation, and quality control to fully refurbish the cosmetic appearance and protective coatings of outdoor, non-flyable replica aircraft.

• The aircraft models are constructed of fiberglass, foam, composite, or light aluminum and are exposed to harsh outdoor conditions.

• Refurbishment includes surface preparation, structural reinforcement, corrosion repair, priming, painting, marking reproduction, and application of long-term weather and UV protection.

• Repair or replace any missing components to match original condition.

• Reproduce all national insignia, squadron tail codes, tail numbers, and special markings.

• A two (2) year warranty against peeling, cracking, or significant fading is required.

• Personnel must complete base-specific safety, environmental, and security training.

• Conduct an initial condition assessment with high-resolution photography and a written report identifying specific types of degradation (cracking, delamination, fading, chalking, impact damage, bird nesting).

• Period of Performance: Work to be completed by September 30, 2026.

• Place of Performance: Off-site, at the contractor's workspace. Displays will need to be reinstalled after refurbishment.

• Contractor must demonstrate past experience refurbishing outdoor aircraft static display models on a Department of War base.

• Adherence to AFI 84-101, Federal Standard 595C, and ASTM G154 is required.

• Project Manager requires experience in composite repair and high-performance exterior coatings.

• Painters require experience with two-part military or marine polyurethane systems.

• Before, in-progress, and after digital photo package at 25%, 50%, 75%, 100% completion for each model.

• Condition assessment and repair log within 30 days of contract award.

• Paint and material technical data sheets and VOC compliance documentation within 30 days of project completion.

• Final acceptance walk-through with the Contracting Officer's Representative (COR).

Form / Attachment / Pricing Sheet

This document is a "Required Information Sheet" that all vendors must complete and return with their quote submission. It serves to collect essential company and product details necessary for the government's evaluation and contract processing.

• Shipping/transportation terms: FOB: Destination
• Manufacturers End Product Country of Origin: To be filled in by the vendor (Supplies Only).
• Availability to public: Vendor must indicate if the item/service is available for sale, lease, and/or license to the general public (YES/NO).
• Payment Terms: To be filled in by the vendor.
• Delivery Date: To be filled in by the vendor.
• Company Name: As registered in SAM.
• UEI (Unique Entity Identifier): To be filled in by the vendor.
• CAGE (Commercial and Government Entity) Code: To be filled in by the vendor.
• Point of Contact (POC): Name, Telephone, and E-Mail address.
• Warranty Information: To be filled in by the vendor.

Completing this form accurately and submitting it with the quote is a mandatory requirement for all vendors. It gathers critical information about the vendor's company registration, product origin, delivery capabilities, and contact details, which are essential for the government to process the quote and potentially award a contract.

Solicitation / RFP / RFQ

This solicitation (FA860126Q0023) is for the procurement of services to refurbish six (6) outdoor static model displays. The work is to be performed at Wright Patterson Air Force Base, specifically outside of Buildings 553 and 556.

• Refurbishment of six (6) outdoor static model displays.

• The work must adhere to the Performance Work Statement (PWS) provided as an attachment.

• Pricing Arrangement: Firm Fixed Price.

• Period of Performance: Delivery Date is 30 Sep 2026.

• Offer Due Date: 15 Apr 2026, 03:00 PM local time.

• Evaluation Factors: The award will be made to the responsible Offeror whose offer is most advantageous to the Government, considering the following factors:

  1. Technical Evaluation: Rated acceptable/unacceptable based on compliance with the PWS, evidenced by a complete description of the supply or service. Specification sheets or capability statements are required.
  2. Price: Determination of a fair and reasonable price based on market research and independent government estimates. The offer with the lowest evaluated price will be selected among those rated "acceptable" for all other factors.

• This acquisition is set aside 100% for Small Business.

• The solicitation incorporates by reference FAR clauses 52.212-1, 52.212-4, 52.212-3, and 52.212-5.

• Payment requests and receiving reports are to be submitted electronically via Wide Area WorkFlow (WAWF).

• The Performance Work Statement (PWS) is attached as document 01.